Motor Castings
Auction starts: October 24, 2019 at
05:00 AM CDT
,
Closing begins: October 31, 2019 at
05:00 AM CDT
Milwaukee, WI
Items
LOT: (3) 32 in. x 32 in. Non-Geared Cylindrical Ladles
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
34 in. x 30 in. Air Operated Furnace De-Slagger
|
Milwaukee 3/4 in. Magnetic Base Drill Press
|
42 in. Dia. x 98 in. High Furnace Charge Bucket, with Bail
|
42 in. Dia. x 98 in. High Furnace Charge Bucket, with Bail
|
Modern 28 in. x 36 in. Geared Treatment Ladle
|
Modern 28 in. x 36 in. Geared Treatment Ladle
|
Modern 28 in. x 36 in. Geared Treatment Ladle
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
Modern 32 in. x 32 in. Geared Cylindrical Ladle
|
32 in. x 32 in. Non-Geared Cylindrical Ladle
|
32 in. x 32 in. Non-Geared Cylindrical Ladle
|
32 in. x 32 in. Non-Geared Cylindrical Ladle
|
32 in. x 32 in. Non-Geared Cylindrical Ladle
|
32 in. x 32 in. Non-Geared Cylindrical Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Teapot 41 in. Dia. x 32 in. Non-Geared Ladle
|
Fox 30 in. Left Hand Snag Grinder, 30 HP, Snap Trap, Shuttle Table
|
Tayco Swisher Type Grinder, with 6 in. x 18 in. Magnetic Chuck, Wet Bed
|
Leco Spectrometer Model GDS500A, S/N 3008
|
Leco Carbon Sulphur Determinator Model CS-400, S/N 605-500-400, with HF400A Furnace (not in service)
|
Electronite Quick Lab, S/N 2147, with Cup Holder (not in service)
|
P&H 5 Ton Hot Metal Charge Hoist, with Pendant
|
P&H 5 Ton Hot Metal Charge Hoist, with Pendant
|
LOT: Scrap Charge Conveyor & Inductotherm Gas Fired Pre-Heater, with (6) Burners, Gas System & Controls, Oscillating Conveyor
|
LOT: Inductotherm Furnace System consisting of: 1994 Inductotherm Dual Melt Melting System including (2) Incoming Power Transformers Rated at 3300 kw Each (Tags #22 & #23), 24,600 Volt Primary, 575 Volt Secondary, Interconnecting Cables, Inductotherm Model Dual Melt 6000 kw 150 Hz Power Supply (S/N 94K-34)Furnace Transformer, 3300 KVA, 3-Phase, Type RSL, Class OA, 26,400 Volt Primary, 575 Volt Secondary, High Taps, 27,720 to 25,080 Furnace Transformer, 3300 KVA, 3-Phase, Type RSL, Class OA, 26,400 Volt Primary, 575 Volt Secondary, High Taps, 27,720 to 25,080 Cancoil 8-Fan Heat Exchanger Model DFC5136A041ND3, S/N 14404 Cancoil 8-Fan Heat Exchanger Model DFC5136A041ND3, S/N 15404
|
Furnace Coil (condition unknown)
|
Spare 1994 Inductotherm Furnace Transformer, S/N TAA4182-0101, 3300 KVA, 3-Phase, Type RSL, Class OA, 26,400 Volt Primary, 575 Volt Secondary, High Side Taps, 27,720 to 25,080, 6.79 Impedance, 65 Degree Rise
|
Inductotherm Furnace Coil (freshly remanufactured)
|
LOT: (8) Inductotherm Furnace Liner Forms
|
Jet Wheel Blast Spinner Hanger Monorail Blast System, with 38 in. x 48 in. High Opening, Spinners on 3� Centers, Up to (8) Blast Wheels - Currently Set Up with (6) 25 HP Direct Drive Shot Wheels, Shot System & Controls, 15,504 hours
|
Shaft Blast Machine, with Allen Bradley Micro Logic PLC
|
Piston Head Blast Machine
|
Engineered Abrasive Hand Blast Cabinet, with Twin Shuttle Tables - Each with 36 in. Rotary Table, Shot System, Light Curtain, Allen Bradley PLC
|
Centennial C-Frame Mill, with 22 in. x 30 in. Work Table, Hydraulics
|
Wheelabrator Head Sand Blast, S/N A115792, with Shot System
|
Fox 14 in. Swing-Frame Grinder, 15 HP
|
30 in. x 60 ft. Roller Belt Conveyor
|
Wheelabrator 34 cu. ft. Tumblast Cleaning Machine, S/N A129847, with (2) Direct Drive Shot Wheels, Shot System, PLC Controls, Floor Loader
|
G/K 48 in./36 in. x 20 ft. x 8 in. Deep Oscillating Conveyor
|
Wheelabrator 28 cu. ft. Tumblast Cleaning Machine, with (1) Direct Drive Shot Wheel, Shot System, PLC Controls
|
G/K 42 in. x 10 ft. x 14 in. Deep Oscillating Conveyor
|
G/K 30 in. x 15 ft. x 10 in. Deep End Drive Oscillating Conveyor
|
B&P Speedmuller Model 75B, with Dust Hood & Batch Hopper
|
Hartley Compactability Controller Model D18MKII-271, S/N 18MKII-633, with Test Unit & Bond Transporter
|
Inductotherm Power Supply Model Power Trak 500-10, S/N 81-681-20-246-11, Rated at 500 kw, 1200 Hz
|
BMM Roller Lift Molding Machine, S/N DH14004 (2005), with Controls and Infeed & Outfeed System with Rollover
|
BMM Roller Lift Molding Machine, S/N DH14005 (2005), with Controls and Infeed & Outfeed System with Rollover
|
Mold Handling System with Closing Station, Transfers, Molding & Cooling Lines, Return Line, Elevators & Punch-out Station (flasks & weights are not part of this system)
|
LOT: (46) Mold Weights
|
LOT: (179) Sets of 23 in. x 36 in. x 14 in./12 in. Mold Flasks & Bottom Plates
|
Action Casting Manipulator Model 760, S/N 1754, with Hydraulic System, Cab, Gripper
|
32 in. Deep x 7 ft. Half Moon Oscillating Conveyor
|
G/K 42 in./36 in. x 16 ft. x 7 in. Deep Mold Shake-out Conveyor, with Exhaust System
|
30� in. x 5 ft. Centers Cross Belt Magnetic Conveyor
|
24 in. Belt Sand Aerator
|
3 Ton Hot Metal Hoist with 20 ft. Bridge & Pendant
|
LOT: Approx. 55 ft. of Double-Row Roller Conveyors, 24 in. x 2-9/16 in. Dia. Rollers on 3 in. Centers 48 in. x 18 ft. Roller Belt Conveyor, 52 in. x 2-9/16 in. Dia. Rollers on 3 in. Centers 24 in. x 22 ft. Slider Belt Conveyor
|
Harrington 1 Ton Electric Hoist, with 15 ft. Bridge & Pendant
|
Harrington 1/2 Ton Electric Hoist, with 180 Degree Floor Jib
|
Harrington 1/2 Ton Electric Hoist, with 180 Degree Floor Jib
|
Harrington 1/2 Ton Electric Hoist, with 180 Degree Floor Jib
|
Harrington 1 Ton Electric Hoist, with Mold Handler
|
LOT: (1) 30 in. x 21 ft. & (1) 30 in. x 37 ft. Roller/Belt Conveyors
|
OSI 2-Line Mesh Belt Core Drying Oven, S/N 3710, with (2) 44 in. x 47 ft. Long Mesh Belts, 48 in. x 24 in. Openings, 10 ft. Infeed Section, 17 ft. Oven Section, 14 ft. Cooling Section, 6 ft. Outfeed Section, Controls, Gas System Rated at 2.4 Million BTU
|
LOT: Harrington 3 Ton Electric Hoist, with Pendant & Caldwell 3 Ton Spreader Bar
|
EMI Sutter 30 in. x 30 in. Cold Box Core Machine Model 1734 (rebuilt), S/N 0612-14219 (2012), with 2-Station Shuttle, (2) Core Pick-off Stations, Hydraulic System & PLC Controls
|
Harrington 3 Ton Electric Hoist, with Monorail & Mold Handler
|
Primafond Gasatore Gas Generator Model GBS1-2, S/N 313 (2013)
|
Sutter 30 in. x 30 in. SO2 Cold Box Core Machine, S/N 10-1123, with 2-Station Shuttle, (2) Pick-off Stations, Hydraulic System & PLC Controls
|
Gas Generator
|
OSI 60 in. x 40 ft. Mesh Belt Core Oven, S/N 3545, 72 in. x 24 in. High Opening, 3 ft. Infeed Section, 17 ft. Oven Section, 11 ft. Cooling Section, 14 ft. Outfeed Section, 1.6 Million BTU, Gas System & Controls
|
Tinker Omega 150 kw Electric Sand Heater Model SH-150, S/N SH519-150 (2011), 1000 lb./min., with Controls
|
Tinker Omega Powder Feeder Model PF-12, S/N PF-1229
|
Tinker Omega Continuous Mixer Model TOM 350, S/N TM3-150C-N2 (2011)
|
Tinker Omega Powder Feeder Model PF-12, S/N PF-1228 (2011)
|
Tinker Omega Continuous Mixer Model TOM 350, S/N TM3-150C-N1
|
18 in. x 40 ft. (est.) Power Sand Delivery Belt
|
Pangborn Dust Collector
|
50 ft. (est.) Bucket Elevator, with Drive
|
Demmler Single-Station Core Machine Model 70 HP, S/N 4649
|
Redford Linear Style Horizontal Cold Box Core Machine Model HCB26UL, S/N 113-HCB26UL (1987), with Allen Bradley PLC, Feed Hopper & Bucket Elevator, Hydraulic System, Gaylord Model SO2-G200 Gas Generator
|
Gaylord Gas Generator Model SO2-G100
|
Ingersoll Rand 500 CFM Desiccant Air Dryer Model HL50011400AA, S/N 318041, with Allen Bradley PLC
|
Ingersoll Rand 400 CFM Desiccant Air Dryer Model TZ400, S/N 13000, with Allen Bradley PLC
|
Santec SO2 Gas Scrubber, with Pumps & Controls
|
Unknown Mfr. SO2 Gas Scrubber, with Pumps & Controls
|
Gaylord 4000 CFM SO2 Gas Scrubber Model 4000A, with Pumps & Controls
|
Gaylord SO2 Gas Generator Model 6000 LM
|
Gaylord SO2 Gas Generator Model 6000 LM
|
Gaylord SO2 Gas Generator Model 6000 LM
|
Redford Horizontal SO2 Cold Box Core Machine Model HC22, S/N HC22-574-200, 50 lb. Blower, with Gaylord Model SO2-G100 Gas Generator
|
LOT: (2) 18 in. x 24 ft. Roller Belt Conveyors, with 22 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers, (3) 18 in. x 45 ft. Roller Belt Conveyors, with 21 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers
|
LOT: (6) 36 in. x 36 in. Deep Sand Hoppers
|
B&P Speedmuller Model 45B, S/N 45B-162-8611, with Skip Loader & Dust Hood
|
Omco Mixer Model MSII
|
LOT: (2) Gaylord Gas Generators Model SO2-G100
|
LOT: (3) Sack Super Sack Stations, with (2) Scales & DROs
|
OSI Twin-Belt Core Oven, S/N 10177.002, 40 in. x 15 ft. Belts, 44 in. x 45 in. Openings, 15 ft. Overall Length
|
LOT: 30 in. x 15 ft. Roller Belt Conveyor, with 32 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers (2) 30 in. x 10 ft. Roller Belt Conveyors, with 32 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers 30 in. x 11 ft. Roller Belt Conveyor, with 32 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers 30 in. 90 Degree Curve Section Roller Belt Conveyor, with 32 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers 30 in. x 45 ft. Roller Belt Conveyor, with 32 in. x 1-11/16 in. Dia. Rollers on 3 in. Centers
|
Gaylord Gas Scrubber, with Pre-Clean Scrubber & Pumps
|
LOT: Beta Set Molding System (1988), with Molding Machine, Kloster Compaction with Allen Bradley PLC, Vapotech Gas System, (3) 150� ft. - 42 in. Pouring & Cooling Lines, Bottom Board Return Line, Flask Return Line, Hydraulic Systems, Controls (flasks not included), and 2-Line Beta Set Cooling Tunnel, with Conveyors
|
Beta Line 34 in. x 48 in. x 12 in./17 in. Deep Flasks - (24) Sets 12 in./12 in., (43) Sets 17 in./12 in., (18) Sets 17 in./17 in.
|
Ingersoll Rand 3 Ton Electric Hoist, with Pendant & Monorail
|
Harrington 3 Ton Electric Hoist, with Pendant & Bridge
|
Harrington 3 Ton Electric Hoist, with Pendant & Bridge
|
G/K 60 in. x 12 ft. Top-Drive Twin-Mast Shake-Out Model SOTM 60X12, S/N C9251.1
|
G/K Double-Deck Oscillating Conveyor, S/N C9251.2, 60 in./48 in. x 22 in. x 3 in. Deep Top Sorting Deck, 42 in. x 33 in. x 4 in. Deep Bottom Deck
|
G/K 48 in. x 5 ft. x 12 in. Deep Shake-Out Model SOSM, S/N C10861.03 (2015), (2) 4.7 HP Drives, Rated at 240 Flasks per Day
|
G/K 45 in. x 5 ft. 8 in. x 24 in. Deep Shake-Out Model SOTM, S/N C10861.01, (2) 1.2 HP Drives, Rated at 240 Flasks per Day
|
G/K 42 in./54 in. x 1 ft. x 41 ft. 42 in./54 in. x 12 in. Deep x 41 ft. Long Oscillating Coneyor Model SCRT, S/N C10861.02, 7.5 HP Drive, Rated at 25 TPH
|
G/K 48 in. x 18 in. x 60.25 in. Incline V-Trough Conveyor, S/N C10861.05, (2) 15 HP Drives, with Hood
|
G/K Vibramill Lump Crusher Model 240, S/N C100861.06, 20 HP Drive, Rated at 25 Tons per Hour
|
G/K 24 in. x 20 ft. Screen Conveyor Model SCRL24X20, S/N C10861.07 (2015)
|
40 ft. (est.) Bucket Elevator, with Drive
|
Dependable 4 in. Sand Transporter Model DFT-4, S/N 271, with Sand Hopper
|
Harrington 2 Ton Electric Hoist w/Manual Mold Handler, Pendant
|
Air Mark Mold Oven, 50 in. x 30 in. High Opening, 40 ft. Oven, Chain Conveyor
|
2500 lb. Lift Table, 48 in. x 54 in.
|
LOT: Manual Adjustable Mold Handler, Portable Mixer & Spreader Bar
|
LOT: (2) Manual Adjustable Mold Handlers
|
LOT: (1) Harrington & (1) C&M 1/2 Ton Electric Hoists, with Pendant Controls
|
MaxVac Portable Vacuum, with Hopper
|
Macawber 3 in. Sand Transporter
|
Macawber 5 in. Sand Transporter
|
Macawber 4 in. Sand Transporter
|
Dynamic Air 4 in. Sand Transporter, with Controls
|
CMA Coordinate Measuring Machine Type T30ACROL, S/N 8010699 (1999), with Renishaw PH10M Stylus, Computer & Monitor, 59 in. x 83 in. Granite Table
|
Portage 30 in. Dia. Rotary Table
|
Portage Layout Machine Model 48A, S/N 4802094, with (2) 50 in. x 70 in. Tables, 30 in. Rotary Table, 3-Axis Digital Readout
|
Portable A-Frame, with CM 1 Ton Electric Hoist
|
Harrington 1 Ton Electric Hoist, with Pendant & Bridge
|
LOT: Mitutoyo 24 in. Digital Height Gauge, Assorted Vernier Style Gauges, Calipers, Dial & Digital Indicators
|
Dual-Station Polishing Table
|
LOT: (2) 6 in. Double End Polisher Buffers on Steel Table, with Vise & Assorted Abrasive Wheels & Paper
|
Buehler Pneumet I Mounting Press
|
Microscope with Illuminator
|
Accu-Scope Unitron Microscope
|
LOT: Assorted Microscopes, Scales, Mixers
|
LOT: Permmeter, Moisture Teller, Ultrasonic Cleaner, Christian Becker Device
|
LOT: Ohaus MB45 Moisture Analyzer, A&D Digital Scale
|
LOT: Dietest Sand Rammer, Perkin-Elmer PH Meter
|
LOT: Assorted Lab Supplies & Sieves
|
Ro-Tap Sieve Shaker
|
Hupp-Co Lab Oven
|
Ohaus Defender 5000 Digital Counting Scale
|
GSE 350 Counting Scale
|
LOT: (2) Flammable Liquid Storage Cabinets
|
HEM Vertical Band Saw Model V100LM-2, S/N 504296
|
LOT: Large Assortment of Band Saw Blades
|
Jet Portable Horizontal/Vertical Band Saw Model HVBS-56M, S/N 041214502
|
Grizzly Oscillating Spindle Sander Model G1071
|
LOT: Craftsman 15 in. Drill Press, Dewalt 6 in. Double End Grinder
|
Nano Breathing Air Purifier Model NBA 3120ES, S/N 18-H1135-01 (2018)
|
LOT: Contents of Basement Entry Room including Machinery Belts, Compressor Filters, Assorted Parts & Rack
|
LOT: Contents of Basement Parts Manager Office including Machinery & Hoist Parts, Cable, Desks, Electrical Supplies
|
LOT: New Hermes Engravograph & Supplies
|
LOT: Contents of Basement Rear Storage Room including Electrical Supplies, Abrasives, Hardware & Fittings, Circuit Boards, etc. (excludes Lot #172)
|
LOT: Work Bench with Contents of Tap Index, Drill Bit Index, Broach Kit & Assorted New Taps Drill Bits
|
Dayton 8 in. Double End Grinder
|
LOT: (2) Work Benches, (2) Shelving Units & (3) Cabinets with Contents of Hoist Hooks & Parts, Hardware & Fittings, Machine Parts, Barrel Pumps, Bridgeport Vertical Mill (for parts)
|
LOT: 15-Drawer Tooling Cabinet & (2) Shelving Units with Contents of Drill Bits, Taps & Dies, Assorted Hardware
|
LOT: Jet Drill Press Model 420FS, U.S. General Rolling Tool Box & Cabinet with Compressor Filters & Parts
|
LOT: Table with Contents of Large Bearings (new in box) & Assorted Scrap Steel
|
LOT: (3) Steel Cabinets with Contents of Bearings (mostly new in box)
|
LOT: (3) Steel Shelving Units with Large Quantity of Bearings (new in box), Sprockets, Pulleys, Hoist Parts
|
LOT: 6 in. Double End Carbide Grinder, Assorted Welding Wire, Welding Rod & Electrode
|
LOT: Reed-Prentice 17 in. x 34 in. Geared Head Engine Lathe with Assorted Tooling (must be removed from basement)
|
LOT: (3) Sections of Shelving with Contents of New Butterfly Valves, Pneumatic Cylinders, Assorted Machinery Parts
|
LOT: (12) Sections of Steel Shelving with Contents of Electrical Switches & Supplies, Breakers, Hoist Parts, Bearings, Oil Seals, Hardware, Fuses
|
LOT: (4) Steel Shelving Units with Contents of Pneumatic Cylinders & Valves, Hoist Parts, Slides, Hardware, Cylinder Repair Kits, Hose, Roller Chain
|
LOT: (5) Cabinets with Contents of New Shaker Springs, Hose, Pneumatic Cylinders, Electronics
|
LOT: Steel Shelving with Contents of Hardware, Belts, Wire, Hose, Cylinders, Conveyor Parts, etc.
|
LOT: Steel Shelving Units with Contents of Hardware, Fittings, Couplers, Electronics, Valves, Elevator Buckets, etc.
|
LOT: Rack with Contents of Hardware, Conveyor Parts, etc.
|
Ingersoll Rand 200 HP Air Cooled Air Compressor Model SSR-EPE200-2S, S/N FF1576U98279 (1998), 68,896 hours
|
Ingersoll Rand 200 HP Air Cooled Air Compressor Model SSR-EPE150-2S, S/N FF2499U03171 (2003), 71,747 hours
|
Ingersoll Rand 200 HP Air Cooled Air Compressor Model SSR-EP200-2S, S/N FF2656U05020 (2005), 87,402 hours
|
Quincy 200 HP Air Cooled Air Compressor Model Q1000, 66,261 hours
|
Ingersoll Rand 200 HP Air Cooled Air Compressor Model SSR-EPE150-2S, S/N FF2498U0317 (2003) (no motor or compressor unit - shell & control only)
|
Ingersoll Rand 4000 CFM Air Dryer Model TMSL, S/N 102-462
|
Ingersoll Rand Modules Model NLM-5 NL
|
Ingersoll Rand Modules Model NLM-5 NL
|
4 ft. x 12 ft. High (est.) Air Receiver Tank
|
LOT: Reconditioned Baldor 150 HP Electric Motor & Rotary Screw Pump (possible parts for Lot #195)
|
LOT: (2) Vimarc Vibrator Motors Model FXZ 700-6 (new in crate)
|
Goulds Water Technology 60 HP Pump Model 3656M
|
LOT: Flowserve 7.5 HP Pump & Goulds 1.5 HP Pump (new)
|
LOT: (14) Electric Motors - 2 HP or Less (new in box)
|
LOT: Baldor Electric Motors - (2) 30 HP & (1) 25 HP (new in box)
|
LOT: (5) 1 HP Electric Motors & (3) Drive Units (new in box)
|
LOT: Baldor Electric Motors - (1) 30 HP, (1) 20 HP, (1) 15 HP, (1) 10 HP (new in box)
|
LOT: Baldor Electric Motors - (1) 10 HP, (2) 5 HP, (1) 3 HP (new in box)
|
LOT: Baldor Electric Motors - (2) 10 HP, (1) 7.5 HP, Harrington 1 Ton Electric Chain Hoist
|
LOT: Assorted Machinery Parts on (5) Pallets
|
Flowserve 10 HP Pump
|
Goulds 50 HP Pump
|
LOT: (2) Vibrator Motors
|
Baldor 200 HP Electric Motor
|
Baldor 100 HP Electric Motor (new) on Skid
|
G/K 15 HP Shaker Motor (reconditioned)
|
100 HP Electric Motor
|
Harrington 1/2 Ton Chain Hoist, with Pendant Control (new in box)
|
Harrington 3 Ton Chain Hoist (repaired), includes Spare Parts Hoist
|
Harrington 2 Ton Chain Hoist
|
Harrington 1/2 Ton Chain Hoist, with Pendant Control
|
Demmler Core Machine Model 70HB
|
Hyd-Mech Roll-in Band Saw Model VW-18
|
LOT: (6) Electric Motors, (2) Pneumatic Butterfly Valves
|
LOT: (3) 25 HP Pumps
|
LOT: (3) Floor Scales with Rice Lake DROs
|
LOT: (7) Sections 8 ft. Pallet Rack with Contents of Electric Motors, Hoists & Scrap Metal
|
LOT: Liftable Torch Platform with Bottles, Gauges, Hose & Job Box
|
LOT: (6) Rolls of 60 in. & (1) Roll of 48 in. Continuous Mesh Galvanized Conveyor Belt
|
LOT: (3) Sections 8 ft. Pallet Rack with Contents of Electric Motors, Hoists & Scrap Metal
|
LOT: (4) Vibrator Motors, (4) Assorted Electric Motors
|
Ingersoll Rand Compressed Air Filter Model F1870NG
|
LOT: Assorted Wire & Hose on (3) Pallets
|
LOT: Contents of Loading Dock & Store Room including Machine & Conveyor Parts, Filters, Hose, Pallet of Oil Dry
|
LOT: Approx. 5700 lbs. of Alloy Melt on (2) Pallets
|
LOT: (2) Versevo Net Shape Solutions Fixtures, Roll of Burning Bar & Liftable Hydraulic Jaw Device
|
LOT: Assorted Conveyor Belt, Rollers, Buckets, etc. on (10) Pallets
|
LOT: Electric Motors - (1) 200 HP & (1) 100 HP
|
LOT: (3) Assorted Barrel Lifters
|
LOT: Steel Shelves & Scrap Metal
|
Tennant Ride-on LP Floor Machine Model S-20 (runs - needs work)
|
Landa Pressure Washer Series PHW
|
Caterpillar 4900 lb. Electric Forklift Model M50DSA, S/N 8J002670, 36 Volt, with Charger
|
Linde 5750 lb. Diesel Forklift Model H30D, S/N H2X393E02833, 183 in. Lift, Side Shift, 1822 hours
|
Linde 6000 lb. Diesel Forklift Model H50D, S/N H2X394C0382, 184 in. Lift, with Cascade 100G Rotator, 11,458 hours
|
Linde 9850 lb. LP Forklift Model H50T, S/N H2X395C02441 (2012), 178 in. Lift, with Cascade C100 Rotator, 4300 hours
|
Linde 6000 lb. Diesel Fork Lift Model H50D, S/N H2X394C0382, 184 in. Lift, Cascade 100 G Rotator, 18,628 hours
|
Linde 5590 lb. LP Forklift Model H30T, S/N H2X393D54486, 189 in. Lift, with Clamping, 13,118 hours
|
, 9041 hours
|
Caterpillar 4250 lb. LP Forklift Model GC25, S/N 4EM09749, 190 in. Lift, Side Shift, 1765 hours
|
Linde 3725 lb. LP Forklift Model H30, S/N H2X391F50458/2015, with Side Shift, 9318 hours
|
Linde 6000 lb. LP Forklift Model H45T, S/N H2X39400861, 123 in. Lift, 7923 hours
|
Linde 3755 lb. LP Forklift Model H20T, S/N H2X391D02586, 182 in. Lift, Side Shift
|
Caterpillar 6000 lb. Electric Forklift Model MC60DP, S/N 78K00339, 155 in. Lift, with Charger, shows 157 hours
|
Linde Walk-Behind Electric Pallet Jack, 24 Volt
|
Linde 6000 lb. Walk-Behind Electric Pallet Jack Model EW60-02, 24 Volt
|
Lifeguard 24 Volt Battery Charger
|
Thermal Arc Pak 45 Plasma Arc Cutter
|
Hypertherm Plasma Cutter Model Power Max 1000, S/N 1000-022502
|
Hypertherm Plasma Cutter Model Power Max 30
|
Miller 300 Amp TIG Welder Model 330A/BP
|
Norstar Portable Wire Feed MIG Welder Model M200i-M
|
Lincoln Arc Welder Model AC-225
|
LOT: Steel Table with Assorted Welding Supplies & Accessories, Phoenix Dry Rod Oven
|
Miller Portable LP Welder Model Bobcat 250
|
Miller Portable LP Welder Model Bobcat 250
|
Miller 600 Amp Welding Power Source Model SRH-665
|
Thermal Arc 3-in-1 Welding System Model Fabricator 211i
|
Torch Cart with Gauges, Hose & Torch
|
Torch Cart with Gauges, Hose & Torch
|
18 in. Wet Concrete Saw
|
2006 GMC Sierra 3500 Stake Bed Truck, VIN 1GDJC34U16E107494, Dually, V8 Gasoline Motor, Automatic Transmission, 12 ft. Bed
|
2009 GMC 2500 HD 4-Wheel Drive Pick-up Truck, VIN 1GTHK44K19F141525, V8 Vortec Gasoline Motor, Automatic Transmission, 8 ft. Bed
|
Baldor Double End Bench Top Buffer
|
48 in. Manual Sheet Metal Brake
|
H-Frame Hydraulic Press, with Blackhawk Power Supply
|
Dayton 8 in. Double End Pedestal Grinder
|
60 in. x 88 in. x 1-1/4 in. Steel Fabrication Table, with Wilton 6 in. Torpedo Vise
|
Core Drill with 8 in. Bit
|
LOT: (5) Assorted A-Frame Ladders - (2) 10 ft., (1) 8 ft., (2) 6 ft.
|
LOT: Fastoria Portable Infrared Heater (new), Electric Pressure Washer
|
Husqvarna Gas Powered Cut-off Saw Model K760, with Cut-off Wheels
|
Husqvarna Gas Powered Cut-off Saw Model K760, with Cut-off Wheels
|
Milwaukee 1-1/4 in. Heavy Duty Magnetic Drill Model 4202
|
Evolution 9 in. Steel Cutting Circular Saw Model 30 TCT
|
Dewalt Rotary Hammer Model D25602 & Bits
|
LOT: (2) Blowers & (3) Propane Heaters
|
Dewalt 14 in. Cut-off Saw
|
Dewalt 14 in. Cut-off Saw
|
Dewalt 14 in. Cut-off Saw
|
LOT: (2) 48 in. Aluminum Pipe Wrenches, Assorted Large Combination Wrenches
|
LOT: (2) Drive Socket & Ratchet Kits - (1) 1 in. & (1) 3/4 in.
|
LOT: (4) Assorted Torque Wrenches
|
LOT: Large Quantity of Carbide Tip Drill Bits (new)
|
LOT: Tubing Benders, Paint Guns & Supplies
|
LOT: (2) ITW Dynatec Hot Melt Glue Hoses & Guns (new in box)
|
LOT: Large Quantity of Files (new in box)
|
Magnaflux Detector Model Y-8
|
1320 lb. Electric Hoist (new in box)
|
LOT: Snap-On Armature Reconditioning Tool, (2) Tachometers, Assorted Test Devices
|
LOT: Reciprocating Saw, Jig Saw, Circular Saw
|
LOT: (1) Milwaukee & (1) Dewalt 1/2 in. Electric Impact Wrenches
|
Hilti Powder Actuated Fastening System Model DX462
|
LOT: (2) Electric Drills, (3) Cordless Drills
|
LOT: Ridgid Threading Dies
|
LOT: (2) Gaylord Vaporizers Model 2000H 502 (new)
|
Wilden Diaphragm Pump Model PS4 (new)
|
Wilden Diaphragm Pump Model PS4 (new)
|
Zebra Printer Model ZT230
|
LOT: (10) Pneumatic Straight Shaft Grinders
|
LOT: (10) Pneumatic Straight Shaft Grinders
|
LOT: Assorted Pneumatic Drills & Die Grinders
|
LOT: Assorted New Pneumatic Tools - (3) Drills, Scaling Hammer, Chisel
|
Defender Mobile Pro Power Sentry 6000 Camera System
|
LOT: (3) Pneumatic Impact Wrenches - (1) 3/4 in. Drive, (2) 1/2 in. Drive
|
LOT: Pneumatic Stapler, Die Grinder, Scaling Hammer
|
LOT: (5) Pneumatic Scaling Hammers
|
LOT: (5) Pneumatic Scaling Hammers
|
LOT: (5) Pneumatic Scaling Hammers
|
LOT: (5) Pneumatic Scaling Hammers
|
LOT: (4) Pneumatic Demolition Hammers
|
LOT: (2) Right Angle Grinders
|
LOT: (3) Straight Shaft Pneumatic Grinders
|
LOT: (3) Straight Shaft Pneumatic Grinders
|
LOT: (3) Straight Shaft Pneumatic Grinders
|
LOT: (3) Straight Shaft Pneumatic Grinders
|
LOT: (3) Straight Shaft Pneumatic Grinders
|
LOT: (4) Right Angle Pneumatic Grinders
|
LOT: Approx. (80) 8 in. x 1 in. x 5/8 in. Grinding Wheels, Approx. (100) 3 in. x 3/4 in. x 7/8 in. Grinding Wheels (new)
|
LOT: Approx. (13) 12 in. x 2 in. x 1-1/4 in. Grinding Wheels (new)
|
LOT: Approx. (100) 6 in. x 1 in. x 5/8 in. Grinding Wheels (new)
|
LOT: Approx. (24) 12 in. x 2 in. x 1-1/4 in. Grinding Wheels (new)
|
LOT: Approx. (24) 20 in. x 1 in. x 8 in. Grinding Wheels (new)
|
LOT: (4) Chain Hoists
|
LOT: (5) Lever Style Chain Hoists
|
LOT: (4) Demolition Hammers, (1) 1 in. Impact Wrench
|
LOT: Assorted Pullers & Plate Lifters
|
LOT: Job Box with Demolition Hammers & Hose
|
LOT: BW Micro Dock II Test & Calibration Station, Gas Detectors, Oxygen Mask & Apparatus
|
LOT: Contents of First Aid Room including MSA Model 5600 Gas Monitor, Assorted Shelving & Supplies
|
1/4 Ton Electric Hoist, with Pendant
|
LOT: (2) Max Lift Tables - (1) 42 in. Dia., (1) 36 in. x 42 in.
|
LOT: (2) Cabinets with Contents of Leather Gloves, Welding Aprons, Face Shields, Assorted Tools & Machine Parts
|
Lantech Rotary Pallet Stretch Wrapper Model S300
|
LOT: (13) Rolls Stretch Wrap
|
LOT: (2) Flammable Liquid Storage Cabinets, (1) Rubbermaid Cabinet with Assorted Cut-off Wheels
|
LOT: (2) Forklift Man Baskets
|
In-Ground Floor Scale, with GSE 350 DRO
|
LOT: (4) Steel Banding Carts (no tools) & Pallet of Steel Banding
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Bridge
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: (2) Self Dumping Scrap Hoppers
|
Sefco Heavy Duty Grinder Model 105
|
LOT: Hydraulic Lift Treating Tank & Work Benches, with Assorted Steel Fixtures
|
LOT: Ridgid 300 Threader, Job Box, (2) Pneumatic Hoists
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Bridge
|
LOT: (2) Ingersoll Rand 1/2 Ton Air Hoists, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 500 lb. Pneumatic Hoist
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Self Dumping Scrap Hopper
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & 360 Degree Jib
|
LOT: Assorted Spools of Wire Rope, Assorted Cabinets & Lockers, Repairable Trash Pumps, etc.
|
LOT: (2) Steel Racks with Contents of Hoists, Conveyor Parts, Hose, Scrap Metal, Motors, etc.
|
Ingersoll Rand 1/2 Ton Pneumatic Hoist
|
LOT: Portable My-Te Winch System & (7) Assorted Hand Dollies
|
LOT: (4) Slag Buckets, Job Boxes, Electrical Pipe
|
Best Electric Cement Mixer Model 885PM, S/N 152008130
|
LOT: (5) Drum Fans & (3) Pedestal Fans
|
LOT: (2) Ingersoll Rand 1/2 Ton Air Hoists, (1) with Pendant & (1) with Rope
|
LOT: Approx. (30) Assorted Large Steel Flasks
|
Manual Adjustable Handler
|
LOT: Assorted Rolling Material Carts & Casting Trays
|
Manual Adjustable Mold Handler
|
10 ft. Rolling Safety Stairway
|
LOT: (4) Rolling Material Carts & (12) Custom Trays
|
LOT: (5) Steel Material Racks
|
LOT: (2) Hydraulic Lift Tables, (1) Rolling Hydraulic Work Bench
|
CM Lodestar 1/2 Ton Air Hoist Pendant and Bridge
|
LOT: (4) Sections 36 in. Deep x 9 ft. Wide x 12 ft. High Pallet Rack, with Wire Decking
|
LOT: (10) Rolling Stackable Material Racks, (16) Casting Trays
|
LOT: (2) Core Paste Stations
|
LOT: (2) Steel Shelving Units with Contents of Steel Fixtures
|
1/2 Ton Free Standing 360 Degree Jib, with Pneumatic Hoist
|
1 Ton Pneumatic Hoist
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & 360 Degree Floor Jib
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Monorail
|
Ingersoll Rand 1/2 Ton Air Hoist, with Pendant & Wall Jib
|
Harrington 2 Ton Electric Hoist, with Pendant (on skid)
|
LOT: (3) Free Standing 360 Degree Jibs (no hoists)
|
1 Ton Pneumatic Hoist
|
1 Ton Pneumatic Hoist
|
LOT: (8) Pedestal Fans
|
Mobile Mini 40 ft. Container
|
LOT: (2) Self Dumping Scrap Hoppers
|
LOT: Approx. (40) Collapsible Wire Baskets
|
LOT: Approx. (25) Rolling Stackable Material Racks
|
LOT: Approx. (20) Rolling Stackable Material Racks
|
LOT: Approx. (30) Rolling Stackable Material Racks
|
LOT: Approx. (30) Rolling Stackable Material Racks
|
LOT: Casting Trays - (80) 30 in. x 40 in. & (208) 42 in. x 60 in.
|
8 ft. Dia. x 20 ft. Long Vertical Stainless Steel Tank
|
1978 Fruehauf 45 ft. Tandem-Axle Storage Van Trailer Model FB9-F2-45, S/N MAZ-565818, 68,000 GVW
|
1981 Fruehauf 45 ft. Tandem-Axle Storage Van Trailer Model AX9-48-0.1E-45, S/N SV4528_
|
LOT: 500 Gallon Diesel Fuel Tank with Electric Pump, Hose & Concrete Barricades
|
Mobile Mini 40 ft. Container
|
Mobile Mini 40 ft. Container
|
Ingersoll Rand 1125 CFM Compressed Air Dryer Model TM1125-TW, S/N 98JTM479 (1998)
|
LOT: All Remaining Untagged Lots in Rear Yard (as scrap)
|
19 in. x 102 in. Geared Head Engine Lathe, Carriage with Cross Slide, Threading, Tailstock, Pan Bed
|
Delta Rockwell Radial Arm Drill, 18 in. x 26 in. T-Slot Table
|
Linde 4400 lb. Electric Walk-Behind Pallet Lift Model P20
|
2000 lb. (est.) Electric Walk-Behind Stacker Lift
|
Pro-Tech 14 in. Abrasive Cut-off Saw
|
Jet 10 in. Tilt Arbor Table Saw, with Rip Fence
|
Apex 16 in. Disc Sander, with Tilt Table
|
Wilton 14 in. Pedestal Vertical Band Saw
|
Phoenix Dry Ice Cleaning System, with Hopper, Hose & Wand
|
LOT: (2) Pneumatic Hoists
|
Harrington Electric Chain Hoist, with Spreader & Pendant
|
LOT: Remaining Contents of Basement Room including Tool Boxes, Hand Tools, Steel Horses, Furniture
|