Ohio Based Powdered Metal Manufacturer
Auction starts: April 18, 2024 at
10:00 AM CDT
,
Closing begins: May 2, 2024 at
10:00 AM CDT
West Carrollton, OH
Auction Type: Online
Items
Bussmann Simetag 400 Ton Powder Compacting Press, Hydraulic, Model HPM-400, 440 Tons Maximum Pressing Force, 11.8" Maximum Depth of Fill, up to 12 Strokes Per Minute, AB Controller, Newer Low Hour Main Pump System, Die Set
|
Bussmann Simetag 200 Ton Powder Compacting Press, Hydraulic, Model HPM-200S, S/N: M2727, 220 Tons Maximum Pressing Force, 7.8" Maximum Depth of Fill, up to 15 Strokes Per Minute, Die Set
|
Bussmann Simetag 200 Ton Powder Compacting Press, Hydraulic, Model HPM-200, S/N: M1310, 220 Tons Maximum Pressing Force, 7.8" Maximum Depth of Fill, up to 15 Strokes Per Minute, Die Set
|
Bussmann Simetag 100 Ton Powder Compacting Press, Hydraulic, Model HPM-100, S/N: M1874, 110 Tons Maximum Pressing Force, Missing Die Set, Modified as Hydraulic Shop Press, Includes Frame, Pump, Good for Parts
|
Gasbarre Powder Compacting Press, Model 200 Die Set Series, S/N: 87284, Mechanical, Optional Underfill, Optional Dual Level Die Set, Power Core Rod, Optional Dual Upper Punch, Optional Core Rod Molding Stops, Removable Die Set, Adjustable Die Table Molding Stops, Shuttle Feed Shoe, 4-1/2" Depth of Fill, 7" Upper Ram Stroke, 7 to 30 Strokes Per Minute
|
Gasbarre Powder Compacting Press, Mechanical, Model 30 Standard, S/N: 86256, 30 Ton Maximum Pressing Force, 3-1/4" Maximum Depth of Fill, 8 to 50 Strokes Per Minute, Cieco PLS Controller
|
Hydramet Powder Compacting Press, Hydraulic, Model HC-60, 60 Ton Maximum Pressing Force, 5" Maximum Depth of Fill, Up to 30 Strokes Per Minute, Opposed Ram, Die Set
|
Hydramet Powder Compacting Press, Hydraulic, Model HC12, 12.5 Ton Maximum Pressing Force, 3" Maximum Depth of Fill, Up to 47 Strokes Per Minute, Opposed Ram, Die Set
|
Kotaki Powder Compacting Press, Hydraulic, Model KPH-100, S/N: 2123, 100 Ton Maximum Pressing Force, Die Set
|
Kotaki KPH-63 63-Ton Powder Compacting Press, Mfg. No. 6773, 1000 mm Stroke, Mfg. Date: 1976
|
CI Hayes 18" Belt Sintering Furnace, 3 Zones, Type: BAC, S/N: 15693, 2,100 F Maximum Temperature Rating, 105 Kw, 440 Volts, 3 Phase, 149 Amps, 548" Overall Length, 10" Height Above Belt, 96" Hot Zone Length (approx. dimensions)
|
Aqua Tower Cooling Tower (HOOKED UP TO FURNACE)
|
CI Hayes Ammonia Dissociator "Cracker", Type ADG-2006-FM, S/N: 15741, Maximum Output 2000 CFH @ 10 PSIG, 1750 F Maximum Temperature Rating, 48 Kw, 220 Volts, 3 Phase, 60 Hertz, 126 Amps, Recommended Fuse Amperage 150, 63" L x 62" W x 77" H (approx. dimensions) This unit provides atmosphere used on CI Hayes 18" Belt Furnace
|
New Retort for CI Hayes Ammonia Dissociator described in Lot 12, Inconel Construction, Recently purchased for over $18,000
|
Belt Furnace, Air Products JA-9029 Control, 476" Overall Length, 132" Hot Zone Length
|
LOT: (47 approx.) Kadon Corp. Plastic Oven Baskets
|
Sweco FM Series Vibratory Finisher, Urethane Lining, 48" Diameter
|
Almco Vibratory Finisher, Round Type, Urethane Lining, 48" Diameter, 12,083 Hours Indicated
|
Ingersoll Rand Air Compressor. Model: IRN100H-CC, S/N: NV6658U04302
|
Ingersoll Rand Air Dryer, Model: TMS 0540, S/N: TMS0540-0502/5608, Date of Mfg. 2005
|
Ingersoll Rand 14' (approx.) Vertical Air Receiver Tank
|
1981 Mack MS200 Box Truck, VIN: VG6M111B1BB012519, w/Premier Model 708 19' Box S/N 231, 3,000 Lb. Capacity Lift Gate, GVWR Approx. 28,000 Lbs., New Ignition & Key, 067,770 Miles Indicated (TRUCK TURNS OVER BUT DOES NOT START)
|
Minuteman PB32036Q Power Boss Floor Scrubber, S/N: VPB32036QP0846, 36 DC Volts w/Minute Man 36 Volt Automatic Battery Charger
|
Bridgeport Vertical Mill, 1-1/2 HP , 16" Throat, 42" T-Slot Table, S/N: 178894
|
Central Machinery 20-Gallon Parts Washer w/Pump, 120 Volts, 5.25 GPM
|
LOT: Chicago Electric Flux Wire Welder, 90 Amp., 120 Volt, 24 Amps, Single Phase, Assorted Welding Wire, Electrodes, Welding Accessories on Pallet
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins, Bolts
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins: Bolts, Nuts, Washer, etc.
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins: Bolts, Nuts, Washer, etc.
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins: Bolts, Nuts, Washer, etc.
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins: Bolts, Nuts, Washer, etc.
|
LOT: (1) Pallet of Assorted Hardware in Compartment Bins: Bolts, Nuts, Washer, etc.
|
LOT: (1) Pallet of Assorted Rubbermaid Fast Track Closet Shelves, Expandable Closet Kits, Shoe Organizers
|
LOT: (7) Rolling Parts Racks
|
LOT: (5) Rolling Parts Racks
|
LOT: (5) Rolling Parts Racks
|
LOT: (5) Rolling Parts Racks
|
LOT: Alnor Type 7000 H Dew Pointer on Steel Stand
|
LOT: (3) Vacuum Tables, 30" x 24" Rolling Steel Table
|
Aeroseal Scrubber Fan Model 82ASF506
|
120" x 30 Stainless Steel Table
|
LOT: (7) Empty Cabinets
|
LOT: (3) Scrubber Fans
|
Nordic Track C900 Pro Treadmill
|
Cincinnati 5 HP Double Ended Grinder
|
LOT: (4) Char-Broil Propane Grills
|
LOT: Whirlpool & Amada Dryers
|