Emmie Die & Engineering
Auction starts: November 2, 2023 at
10:00 AM EDT
,
Closing begins: November 16, 2023 at
10:00 AM EST
Brown City, MI
Auction Type: Online
Items
Milwaukee 4220 Electromagnetic Drill Press, S/N 296-3970
|
Milwaukee Heavy Duty 9" Sander
|
LOT: Milwaukee 7-1/4" Circular Saw, Milwaukee 4-1/2" Sander/Grinder, Milwaukee Magnum Hole Shooter (no cord), Unopened 4-1/2" Grinding Wheels
|
LOT: (2) Bosch 18 Volt Drills w/(4) Batteries, (2) Chargers
|
Thor Portable Power Tools UE100 Hammer in Case, S/N 8539-195783
|
LOT: Black & Decker #8 Nibbler, Skil Plunge Router
|
LOT: (8) Assorted Pnuematic Tools, (2) Sanders, Impact Wrench, Drill, (4) Air Die Grinder
|
LOT: Legacy 12 Volt Electric Grease Gun w/Charger & (2) Batteries, Grease Gun, (2) Caulk Guns, (2) Filter Wrenches
|
Ramset Powder Fastening Systems Red Head Model D60 Low Velocity Powder Actuated Tool
|
Signode Paslode Pnuematic 1-1/4" Staple Gun w/Box of Paslode 1-1/4" 16" Gage Galvanized Staples
|
LOT: Threading Die Set, Extra Threading Dies
|
LOT: (4) Assorted Pipe Wrenches, (3) Assorted Pipe Cutters, Puller, etc.
|
LOT: SK Tools 1/2" Socket Set, All-Trade 3/4" Socket Set
|
LOT: Assorted 3/4" Sockets
|
LOT: Greenlee 735BB Knock Out Punch Set, 1/4" Socket Set, 1/8" Socket Set, Assorted Sockets in (2) Tubs
|
LOT: (4) Assorted Large Adjustable Wrenches
|
LOT: Assorted Pry Bars, Crow Bars, Breaker Bar, Wrenches, Nail Puller, etc.
|
LOT: Assorted Wrenches in Tub
|
LOT: Assorted Allen Wrenches, Screw Drivers, Vise Grips, Files, Cutters, Wrenches, Tape Measures, etc.
|
LOT: (3) Plastic Tubs w/Assorted Rubber Mallets, Hammers, Sledgehammer, Cutters, etc.
|
LOT: Assorted Carbide & HSS Endmills
|
LOT: Assorted HSS Endmills
|
LOT: Assorted Straight & Taper Shank Drill Bits in 8-Tier Organizer
|
LOT: Assorted Used & Unused Drill Bits
|
LOT: Assorted Drill Bits, Taps, Reamers, etc.
|
LOT: Assorted Taps
|
LOT: Assorted Drill Bits, End Mills, Cutters, etc.
|
LOT: Rolling Shop Cart w/Assorted Reamers, Chuck Reamers, Taps, etc.
|
8" Machine Vise w/Handle
|
Enco 6" Machine Vise on Swivel Base
|
Kurt 6" Machine Vise w/Handle
|
6" Machine Vise w/Handle
|
6" Machine Vise w/Handle
|
Bridgeport 6" Vise on Swivel Base
|
6" Machine Vise on Swivel Base
|
LOT: (2) Swivel Bases
|
8" 3-Jaw Chuck
|
T-Slotted Rotary Table, 8" x 6"
|
15" Dia. Turntable
|
12" x 6" Magna-Lock R-612C Magnetic Chuck
|
Gorton Vertical Mill Model 1-22 Trac Master, 12" x 36" Table, S/N: 48480, 5 HP Motor, Power Table, Low RPM 6.5-46 RPM, High RPM 65-4600 RPM
|
Maxport Vertical Mill, Model JS-2S, S/N: 84050, 12"x42" Table, Mitutoyo XY Digital Readout, 2 HP Motor, 60-4200 RPM, Kurt Vice, Manual Machine
|
Bridgeport Vertical Mill, 1-1/2 HP, 9"x 42" Table, S/N 12-103562, Trak A.G.E. XYZ Readout, Vise
|
Bridgeport Vertical Mill, S/N 79676, 36" x 9" T-Slot Table, 1 HP, 16-1/2" Throat
|
LOT: (25) Assorted Tooling & Tool Holders for Mills
|
Clausing 12" x 24" Engine Lathe, Model 5904, S/N: 507903, Range 52-2000 RPM, 811 3-Jaw Chuck, Tailstock, Inch Threading, Variable Speed, 12" Swing 24" Between Centers
|
Ikeda Radial Arm Drill, S/N; 77058, 1500 RPM, 3'x 7' 3" (1977) (Asset Pl)
|
Standard-Modern 28" Radial Drill, 13" Throat, 18" x 18" T-Slot Table, S/N 349
|
Cleereman Single Spindle Upright Drill Press, 23" Table, Estimated 12" Spindle Travel, Estimated Vertical Adjustment of Sliding Head 17", 40-800 RPM
|
Powermatic Model 1200 Single Spindle Drill Press, S/N: 9320V113, Drill Diameter 1/16" - 1", 100-2000 RPM, 1-1/2 HP
|
Acer AGS-1020ADH Surface Grinder, S/N: 98050571, Table 9"x 20", Grinding Width Max. 10", Grinding Length Max. 20", Height Spindle Center to Table Max. 19-1/2", Table Longitudinal 20-1/2", Table Cross Travel 11", Grinding Wheel Diameter 8", Grinding Spindle Speed 3,580 RPM, Electro-Magneti Chuck, Incremental Power Down Feed, Coolant Tank & Pump (1998)
|
Harig 618 Challenger Handfeed Surface Grinder,S/N C-2430, Walker Magnetic Chuck
|
Powermatic Model 30 6" Belt/12" Round Sander, S/N 230221
|
Dayton 8" Bench Grinder, 3/4 HP
|
LOT: Assorted Grinding Wheels on Left Pegboard
|
LOT: Assorted Grinding Wheels on Right Pegboard
|
Dust Collector System for Grinding Room
|
Dayton Model 3Z866 6" Belt/12" Disc Sander
|
2-Spindle Drill Press, 36" x 24" Table, 13" Throat
|
Econoline RA36-1 Sand Blast Cabinet w/(2) Buckets of Sand Blast, S/N E78-650
|
LOT: (1) Baldor 1/2 HP, (1) Delta 1/2 HP Double Edge Grinder/Buffer on Metal Stand
|
Safety-Kleen Parts Washer
|
DoAII Vertical Band Saw, Model 2013V, S/N: 457- 901620, 165" Saw Band Length, 20" Throat, Blade Welder, 230 Volt, 3 Ph, 60 Hz
|
Do-All Metal Master Vertical Band Saw, 24" x 24" Table, 16" Throat
|
Roll-in All Purpose Vertical Band Saw, 30"x 18.5" Table
|
WF Wells Horizontal Band Saw with Roller Table Approx. 120"x 1.5" Blade, S/N: 803358
|
Kalamazoo 12" Cut Saw
|
Baldor 2 HP 2-1/2" Belt Sander
|
Cummins 3/4 HP Double Edge Bench Grinder 6"
|
4' Manual Roller
|
Fadal VMC6030HT Vertical Machining Center, S/N: 012002124915, 10,000 RPM, 60"x 30" Table, 20 Position Auto Tool Changer, X-Axis 60", Y-Axis 30", Z-Axis 30", Max. Table Weight: 4,120 lbs, Cat #40 Spindle, Hennig Chip Conveyor, Coolant, CNC Controls, (20) Pieces of Assorted CAT 40 Tooling (2003)
|
Fadal VMC15RT Vertical Machining Center, Model 914-15, S/N: 9707364, 7,500 RPM, 29"x 16" Table, 20 Position Auto Tool Changer, X-Axis 20", Y-Axis 16", Z-Axis 20", Table Capacity 750 Lbs, Rapid Traverse Rate: 400 IPM, Coolant System, CAT #40 Spindle Taper, CNC Controls, (18) Pieces of Assorted CAT 40 Tooling (Vise not included) (1997)
|
LOT: (36) Pieces of Assorted CAT 40 Tooling, Tool Holders on Rolling Tool Cart
|
Kurt 6" Machine Vise (In CNC Lot 69)
|
Sodick Type VL600T Linear Motor Drive Precision Wire-Cut EDM, S/N: T0102, X-Axis 600mm, Y-Axis 400mm, Z-Axis 270mm, U-Axis travel 90mm, V-Axis travel 90mm, Work Tank Dimensions 1,040mm x 780mm, Max. Workpiece Weight 850kg, Wire Diameter 0.1 - 0.3mm, Wire Feed Speed 420mm/sec, Automatic Wire Threader, Machining Method Flushing/Submerged, Dielectric Capacity 420kg, Chiller, Model LN2W Controller 4,168 Cutting Hours Indicated (2016)
|
Sodick Type A320D Wire EDM, S/N: 1232, Year: 1995 Fine EX21 Controller, LN Service Water Chiller, (CURRENTLY NOT OPERATIONAL)
|
400-Ton Niagara Straight Side Press, Model BP2-400-120-60, S/N: 48658, 16" Stroke, 33" Shut Height, 14" Adjustment, 120" x 60" Bed, 12-25 SPM, 27" Windows, Floor Standing, T-Slotted Slide, 7.5" T-Slotted Bolster, Rockford Press Controls, Air Clutch & Brake, Air Counterbalances (1974) (Asset P14)
|
30" Wide x .070" Jaybird Cabinet Style Air Feeder with Pull Thru Straightener, On Press P14, Model J15-3030, S/N: J004005, (5) Roll Straightener Pilot Release, Manual Cabinet Pass-Line Adjustment (Asset F1)
|
275-Ton Niagara Straight Side Press, Model PN- 250-84-42, S/N: P53564, 8" Stroke, 23" Shut Height, 6" Ram Adjustment, 84"x 42" Bed, 15- 30 SPM, 22" Windows, Hydraulic Overloads, 5" T - Slotted Bolster, T-Slotted Slide, Split Crank Design, Solid Frame Construction, Black Max Link Lite Curtains, Palm Buttons, Press Cam 8 Automation Controller, Air Clutch & Brake, Air Counterbalances (1991) (Asset P5)
|
18" Wide Jaybird Air Feeder, Model J20-1818, S/N: R-2547, On Press P5, (5) Roll Pull Thru Straightener, Cabinet Base, Manual Pass-Line Adjustment, Pilot Release (Asset F2)
|
250-Ton Niagara Model BP2-250-96-48 Straight Side Press, S/N: 47304, 12" Stroke, 27" Shut Height, 11" Adjustment, 96"x 48" Bed, 15-30 SPM, 28" Windows, T-Slotted Bolster, SSC-1500 Parts Revolution Control, Triad Light Curtains Floor Standing (1973) (Asset P17)
|
24" Coe Model CPR-S424 Servo Feeder with Pull Thru Straightener, On Press P17, Common Base, S/N: 37564-1, Feeder Capacity .187"x 24" / .210"x 12", Red Lion Touchscreen (2004) (Asset FS/F0)
|
250-Ton Warco Straight Side Press, Model 250-2-60C, S/N: 53114, 60"x 40" Bed, 10" Stroke, 22" Shut Height, 8" Slide Adjustment, 30 SPM, T-Slotted Slide & Bolster Plate, Palm Buttons, Microguard Light Curtains, 22.5" Windows, Air Clutch & Brake, Air Counterbalances, Tie Rod Construction (Asset P10)
|
Coe CPRF-SM312 Air Feeder on Adjustable Manual Base, S/N 24627-1
|
243-Ton Toledo Double Crank Gap Frame Press, Model 207D, 92"x 23" Bed, 62"x 19" Ram, Estimated Specifications: 5" Stroke, 18.5" Shut Height, 4" T - Slotted Bolster, 14" Column Risers, Open Gear Design, Air Counterbalances, Tie Rods, Palm Buttons, PressCam 8 Press Controller (Asset P7)
|
200-Ton Bliss Straight Side Press, 84"x 48" Bed, Estimated Specifications: 14" Stroke, 28" Shut Height, 20 SPM, 6" T-Slotted Bolster, T-Slotted Ram, Note: Numerous Welds in Both Press Columns, Tie Rod Construction (Asset P6) (CHS PARTS SHAKERS HAVE BEEN REMOVED)
|
150-Ton Federal Straight Side Press, Model S2- 150-72-42, S/N: S2-278, 8" Stroke, 24" Shut Height, 8" Ram Adjustment, 72"x 42" Bed Area, 30-60 SPM, 27" Windows, 5.5" T-Slotted Bolster Plate, Palm Buttons, Press Room Electronics Brake Monitor, Microguard Light Curtains, Air Clutch & Brake, Air Counterbalances, Tie Rod Construction (1987) (Asset P18)
|
150-Ton Federal Straight Side Press, Model S2- 150-72-42, S/N: S2 179, 8" Stroke, 21" Die Space, 8" Ram Adjustment, 72"x 42" Bed Area, 30-60 SPM, Air Clutch & Brake, Air Counterbalances, Palm Buttons, 5" T-Slotted Bolster, 21" Window, Pneumatic Cushions, Banner Light Curtains, Press Room Electronics Brake Monitor, Tie Rod Construction (1973) (Asset P15) (CHS PARTS SHAKERS HAVE BEEN REMOVED)
|
24" Wide Dallas Cabinet Style Air Feeder, On Press P15, 24" Pull Through Straightener, Model D325-27-30RH PTS-360, S/N: 19530, Capacity: .140" x 24" Wide x 30" Stroke, .023" x 1" Wide x 30" Stroke, Manual Base Adjustment, Pilot Release (Asset F3)
|
150-Ton Thunder Bay Straight Side Press, Model 48-150-60, 60"x 48" Bed Area, 60"x 36" Ram, 10" Stroke, 31" Shut Height, 5" T-Slotted Bolster, Wintriss Die 1500 Die Protection, Brake Monitor, Palm Buttons, Banner Light Curtains, Air Clutch and Brake, 35" Windows (Asset P12)
|
30" Coe Press Press Mounted Servo Feeder with Pull Thru Straightener, On Press P12, Model 14050676-S3, S/N: 72243-4, Feeder Capacity Approx. .125"x 30", Mounted on Rolling Base, Control Retrofit Package In Approx. Year: 2017 (Asset F4)
|
150-Ton Verson Gap Frame Press, Model 150-72 G.P.M, S/N: 21571, 6" Stroke, 18" Shut Height, 5" Slide Adjustment, 84"x 36" Bed, 69"x 35" Ram, 30 SPM, 2.5" Thick Bolster, Microguard Light Curtains, Verson Press Controls, Split Crank Design, Air Clutch & Brake (1968) (Asset P4)
|
135-Ton Scottish OBI Press, Type OBl135/54, S/N: 9271, 6" Stroke, 16" Shut Height, 5" Adjustment 54"x 34" Bed, 34"x 28" Ram, 4.5" Bolster, Air Clutch & Brake, Manual Incline Mechanism, Link-Logic Brake Monitor, Tie Bars, Palm Buttons (Asset P11)
|
Bliss Straight Side Press, Model #6-48, 135 Ton, 48"x 36" Bed, Estimated Specifications: 7" Stroke, 12.5" Shut Height, Palm Buttons, T-Slotted Bolster, (Asset P2)
|
100-Ton Niagara Model SC2-100-72-36 Straight Side Press, S/N: 34118, 10" Stroke, 33" Shut Height, 7" Adjustment, 40 SPM, Solid Frame Construction, Microguard Light Curtains, T-Slotted Ram & Bolster (Asset P8)
|
45-Ton Perkins Model 550-B OBI Press, S/N: 27713, 2.5" Stroke, 2.5" Adjustment, 15.5" Shut Height, 18"x 28" Bed, 60 SPM, Air Clutch & Brake, Palm Buttons, Auto Rotator Fixture (Asset P19)
|
12" W Air Feeder, 12" Stroke, (5) Roll Pull Through Straightener
|
Toledo Gap Frame Press, 45-Ton, 51"x 14" Bed, 44" x 12" Ram, Estimated Specification: 10" Stroke 11-3/8" Shut Height, Air Actuated Clutch (Asset P3)
|
35-Ton Marshalltown OBI Press, 6" Stroke, 20"x 28" Bed, Foot Pedal Operated, No Cushion (Asset P13)
|
125-Ton Warco Straight Side Press Under Tarp Outside
|
20,000 Lbs x 24" Wide Air Feeds Inc. Coil Cradle and Straightener, Model: C2000, S/N: 840160, On Press P5, Motorized, Overhead Loop Shoot (1984) (Asset C3)
|
6,000 Lbs x 12" Wide Jaybird Coil Cradle, Mode JA 1260, S/N: R951, On Press P6, Motorized (Asset C2)
|
Estimated 4,000 lb. x 30" Wide Feed Lease Motorized Coil Cradle, On Press P15 (Asset C6)
|
4,000 lb. x 18" Feed Lease Coil Cradle, Model FLCC-4-18, S/N:4702 (Asset C5)
|
4,000 lb. x 18" Wide Feed Lease Coil Cradle, On Press P12, Model FL22-4, S/N: 2906, Motorized (Asset C4)
|
Approximately 4,000 lb. x 18" Wide Coil Cradle (Asset C1)
|
3,000 lb. x 15" Rowe Coil Cradle, Model 3015-J, S/N: 15172, 48" OD, Powered
|
6,000 lb. x 30" Coe Motorized Coil Reel, On Press P17, Model CPR-6030, S/N: 27414-2, Loop Control Arm, Jog Fwd/Rev, Auto Mode, (6) Coil Keepers, Manual Adjustment, 60" OD (2001) (Asset R2)
|
6,000 lb. x 24" Wide Dallas Motorized Coil Reel, Model DPR-6,000x24RH 06145E, S/N: 19529, 16"-21" ID, 60" OD, Manual Expansion, 6 Coil Keepers, Loop Control Arm (Asset R1)
|
PA Uncoiler
|
Reel & Straightener Combination, Specification Unknown (Asset 06)
|
Cooper-Weymouth Uncoiler, 1/2 HP
|
Coe Servo Feeder Control Cabinets (Asset F1)
|
Coe Servo Feeder Control Cabinets (Asset F4)
|
Coe Servo Feeder, 6" Wide, 18" Wide Pull Thru Straightener on Cart
|
LSP PresSpray II Airless Spray Die Lubricating system
|
LSP PresSpray II Airless Spray Die Lubricating system
|
LSP PresSpray II Airless Spray Die Lubricating system
|
LSP PresSpray II Airless Spray Die Lubricating system
|
LOT: (8) Vibro Dynamic Micro Level Isolator Pads in Metal Crate
|
Advance Production Tools ISO9001:2015 Hopper Lifting Table
|
Advance Production Tools ISO9001:2015 Hopper Lifting Table
|
Miller 252 Millermatic Welder Mig Welder, S/N: MB110161N, Stock 907321, Volts 200/230, Amps 48/42, KW 7.5, Phase 1, Hertz 60, w/Miller Radiator - 1 Cooling System
|
Miller Millermatic 252 Portable Welder, S/N MB110161N
|
Miller Millermatic 35 Constant Potential DC Welding Power Source, S/N: HJ191854
|
Miller Spectrum 300 Cutmate Plasma Cutting System on Rolling Stand, S/N LA098801
|
LOT: 2-Tank Cart w/(1) Tank, (3) Regulators, Hosing
|
LOT: (2) Steel Tables w/Welding Accessories, (3) Masks, Clamps, Goggles, Addifix 090 Powder Spray System
|
LOT: Rolling Cabinet w/Assorted Welding Wires, Tools, etc.
|
Miller Thunderbolt AC Shielded Metal-Arc Welding Power Source
|
Master Contractor Gas Generator
|
Sullair 3000 S-Energy Rotary Screw Air Compressor, Work Order 3425762, S/N:201208150018, Model 3009V AC, 40 HP, 125 PSI, 167 CFM, 8.6 Bar, 1775 RPM, 480 Volt, 60 Hz, 3PH Variable Speed Drive 29,324 Hours Indicated (2012)
|
Sullair RN175 Dryer Model RN-175-230-1-60-A, S/N 1012SA00732
|
25 HP air Compressor (Asset C3)
|
20 HP Air Compressor (Asset C2)
|
7' Air Receiver Tank
|
2001 Ford F-650 XL Superduty Box Truck, VIN 3FDNF65881MA55201, 18' Box, 26,000 Lb. GVWR, 144,653 Miles Indicated
|
12,000 lb. Allis Chalmer, Model FL120-24, S/N: 48663000, 12,000 lb @ 24", 78" Lift, LP Gas, Solid Tires, 5' Forks, 418 Hours Indicated
|
6,000 lb. Hyster Model H60FT, S/N: L177B21772F, 6,000 lb.@ 24" Load Center, Max Height 187.8", Power Forks, Side Shift, Solid Tires, 6' Forks, 8,611 Hours Indicated
|
3,000 lb. TCM Forklift, Model FCG15N6, Max. Fork Height 130", S/N: 32000420, 4' Forks, Solid Tires, LP Gas, 8,041 Hours Indicated
|
3,000 lb. Toyota Fork Lift, Solid Tires, LP Gas, 4' Forks, 8,792 Hours Indicated
|
Condor Manlift Model 2532, 19'6" Platform Height Electric,
|
Forkliftable Lifting Hook
|
Forkliftable Lifting Hook
|
Forkliftable Self Dumping Hopper (OUTSIDE)
|
Propane Tank Cage (NO TANKS)
|
Forkliftable Self Dumping Hopper
|
Forkliftable Self Dumping Hopper
|
Wesco Pallet Jack, Approx. 5,000 Lb. Cap.
|
Pallet Jack, Approx. 4,000 Lb. Cap
|
Cargo Carrier
|
Carolina 4000 Engine Hoist, 3-Ton Cap.
|
4000 Lb. Cap. Rolling Gantry, Coffin 2-Ton Chain Hoist
|
1000 Lb. Cap Rolling Gantry w/CM 2-Ton Chain Hoist
|
Dillon Dynamometer 20,000 Lb. Cap. Lifting Scale
|
LOT: (4) Assorted Lifting Chains on Pallet
|
LOT: Assorted Lifting Chains & Equipment
|
LOT: Assorted Eyebolts in (2) Tubs
|
Enerpac Hydraulic Porta Power P-392
|
Kwik-Stak 1056 1,000 Lb. Cap. Manual Stacker
|
75" x 30" Hydraulic Die Cart/Table
|
18" x 18" Wesco Hydraulic Die Cart
|
LOT: Mitutoyo BRM507 Bright-M CMM, S/N 97110005 W/Renishaw MIP Probe, Side Table w/Accessories
|
Keyence Handheld Probe CMM XM Series (BARELY USED)
|
36" x 24" x 4" Granite Surface Plate on Metal Stand
|
Master-Grind MGSCVSI Collet Indexer
|
Last Word Radius Dresser
|
LOT: 5C Collet Indexer, V-Block Grinding Fixture
|
Mitutoyo .001-24" Dial Height Indicator
|
Mitutoyo .001-18" Dial Height Indicator
|
LOT: (4) Magnetic Bases, Tooling Block
|
LOT: (5) Micrometers, Torque Wrench
|
Fowler Centering Microscope
|
LOT: (9) Assorted Micrometers
|
LOT: (3) Gage Block Sets
|
LOT: Assorted Gage Blocks, Collet Brick Set
|
CEJ
|
LOT: (3) Assorted Calipers
|
LOT: (2) Pin Gage Sets
|
LOT: (1) Starrett .0005" - 12" Precision Level, (1) Precision Level
|
LOT: (4) Assorted Cylinder Gages
|
60" x 35-1/2" x 8" Granite Surface Plate on Metal Stand
|
Herman 30" x 20" x 5" Granite Surface Plate on Metal Stand
|
66" x 30" x 20" Metal Die Table w/4-1/2" Wilton Torpedo Vise
|
LOT: Contents of Table: Parts Bin Organizers, Drill Bit Organizer, 2-Drawer Organizer w/Drill Bits, Taps, etc.
|
66" x 51" x 36" Metal Die Table (NO CONTENTS)
|
9' x 6' x 36" Metal Die Table w/Tool Changer (NO CONTENTS)
|
LOT: Contents of Table: Assorted Stamps, Punches, Tie Downs, Collets, etc.
|
LOT: (2) Cabinets w/Contents of: Magnetic Bases, Assorted Tooling , etc.
|
30" x 30" Steel Table w/4" Vise
|
LOT: Magnetic Vises, Assorted Blocks
|
Starrett Surface Plate, 18" x 18" x 4" on Metal Table, 48" x 26" x 39"
|
LOT: Cabinet w/Contents of IMF Magnetizer, (15) 5-C Collets, etc.
|
LOT: Cart w/Angle Blocks, Blocks, etc.
|
22" x 18" Metal Surface Plate on Steel Table
|
Oliver Instrument Co. Bench Top Saw/Filer
|
Oliver Instrument Co. Bench Top Spot Welder
|
Height Gage
|
LOT: Contents of Cabinet: Assorted Cutters, Endmills, etc.
|
LOT: Contents of Cabinet: R8 Collets, Collets, etc.
|
LOT: Contents of Racks: Large Assortment of Springs, Die Pistons, Punches, Misc. Die Components, Parts Bins w/assorted Endmills, etc.
|
LOT: 2-Sided Rolling Cart w/Contents of: Tie-Downs, Files, etc.
|
LOT: 72-Compartment Parts Bin Shelf w/Contents
|
LOT: 72-Compartment Parts Bin Shelf w/Contents
|
36" x 12" x 36" Granite Surface Block on Metal Stand
|
LOT: Foremans Desk, (2) Cabinets, HP Laser Jet P2055DN Printer, Work Stool
|
LOT: (2) Cabinets w/Contents
|
LOT: (1) 5' x 3' x 3' Work Bench w/Contents, (1) 60" x 28" x 30" Wood Table (NO CONTENTS)
|
LOT: (3) 6' x 28" Metal Work Benches (NO CONTENTS)
|
44' x 28" x 39" Rolling Cabinet (NO CONTENTS)
|
LOT: (4) Drill Chucks, Tool Holders, etc.
|
LOT: Assorted Dies, Parallels, etc.
|
78" x 36" x 34" Rolling Table
|
12' x 27" x 37' Heavy Duty Steel Table (NO CONTENTS)
|
LOT: US General Rolling 5-Drawer, Top Opening Tool Box w/Contents
|
LOT: (2) Rolling Carts w/Contents, Files, Lathe Accessories, V-Blocks, etc.
|
LOT: Chain Holder, (2) Steel Horses
|
LOT: 60" x 28" x 36" Steel Work Bench w/18" x 18" x 4" Starrett Granite Surface Plate
|
LOT: (8) Medart Lockers
|
LOT: (5) Work Stools, 15-Gallon Waste Can
|
LOT: Contents of top of table: Assorted Taper Shank Drill Bits, Drill Chucks, Tool Holders, etc.
|
LOT: Assorted Taper Shank Drill Bits in (3) Wood Boxes
|
LOT: 50" x 32" Steel Work Bench, (1) 72" x 36" Steel Work Bench (NO CONTENTS)
|
LOT: (2) 78" x 36" Rolling Tables (NO CONTENTS)
|
Julius Bing Safe Co. Rolling Combination Safe (EMPTY)
|
60" x 12" Electric Conveyor
|
LOT: (2) Banding Carts w/Steel Strapping, Banding Tools
|
LOT: Steel Shim Flat Sheets Stock, (2) Cutters
|
Ross Serpar Double Valve, S/N 3573B5638 (UNUSED)
|
LOT: (2) 18" x 12" Steel, (1) Starrett 12' x 8' x 2-1/2" Granite Surface Plate
|
LOT: Soldering Wire, Copper/Brass in Tub
|
5" Vise on Swivel Base
|
LOT: (3) Vises
|
LOT: Assorted Right Angle Blocks, V-Blocks, etc.
|
LOT: (2) 78" x 36" Rolling Tables (NO CONTENTS)
|
LOT: Heavy Duty Rolling Steel Cart w/Contents of: Tie Downs, Hardware, etc.
|
LOT: Heavy Duty Rolling Steel Cart w/Contents of: Tie Downs, Hardware, etc.
|
LOT: (1) 8' x 2-1/2' x31" Steel Die Table, (1) 6' x 3' x 3' Work Table
|
BEA Manual Box Stapler w/Staples
|
78" x 36" Rolling Table w/Contents of Hosing, Copper Wire
|
LOT: (4) Jack Stands
|
48" x 48" Floor Scale w/Pennsylvania 7500 Digital Readout
|
7' x 8" Electric Conveyor
|
LOT: (5) CHS Press Mounted Parts Shakers
|
LOT: (3) Heavy Duty Dollies
|
Bin Holder
|
LOT: (2) Material Racks
|
LOT: (2) 78" x 36" Rolling Tables w/Plastic Tubs
|
14' x 30" x 77" Heavy Duty Steel Die Rack
|
LOT: (2) Wooden Work Benches, (1)Wooden Bench
|
LOT: (2) 78" x 36" Rolling Tables, (1) 60" x 32" Work Bench, (1) 72" x 36" Work Bench (NO CONTENTS)
|
LOT: 6" Reed Mfg. Vise, (2) 8' x 30" Tables (NO CONTENTS)
|
LOT: (2) Workbenches, Shelf, Rolling Cabinet
|
LOT: 6-Tier Shelf w/Contents
|
Roper Whitney Model 118 Bench Punch, S/N 2951-11-72
|
LOT: 2-Section Cage w/Chain Binders, Plate Lifter, Large Bolt Cutters, Railroad Jack, Bottle Jacks, Portable Air Tank, Jack Stands, Yard Equipment
|
Strapping Clips & Cutters
|
LOT: (14) Assorted C-Clamps
|
LOT: (9) Brute C-Clamps, C-Clamps
|
LOT: 70" x 27" x 27" Table, 1" Thick w/Contents of: Kant-Twist Clamps, C-Clamps, Welding Pliers
|
Dake NO. 001 Arbor Press
|
72" x 36" Hamilton Port Elevator Die Table (NO CONTENTS)
|
48" x 32" Die Cart (NO CONTENTS)
|
LOT: Rolling Table w/Contents
|
LOT: 72" x 33" Work Table, 24" x 18" x 4" Starrett Granite Surface Plate, Metal Material Dispenser
|
LOT: (2) Work Tables (NO CONTENTS)
|
LOT: Cabinet & Contents of Fuses, Electrical Components, etc.
|
LOT: (3) Cabinets & Shelf w/Contents of Hardware, Paints, Hold Down Clamps, Springs, etc.
|
LOT: (1) Rolling Cart, (1) Lift Table
|
LOT: Assorted Hoses on Wall
|
LOT: 20' x 8'-1/2" Double Sided Cantilever Rack w/Assorted Metal Stock
|
LOT: 6' x 8' 1-Sided Cantilever Rack w/Assorted Metal Stock
|
LOT: Assorted Metal Stock on Heavy Duty Rack
|
LOT: 10' x 32" Roller Conveyor w/Saw Blades
|
LOT: Material Rack w/Contents,Heavy Duty Rack, Pedestal Fan
|
LOT: (4) Metal Stands, 68" x 48" Platform, Table etc.
|
LOT: (2) Sections Steel King SK3000, 9' x 10' x 36" Heavy Duty Die Racks (NO CONTENTS)
|
LOT: (2) Sections 7-1/2 x 7-1/2 x 36" Heavy Duty Die Racks (NO CONTENTS)
|
LOT: (2) Sections 8' x 6' x 30" Heavy Duty Die Racks (NO CONTENTS)
|
Self Dumping Hopper
|
LOT: (2) Sections 69" x 92" x 36" Die Racks, (1) Section 6' x 4-1/2 x 21 Die Rack
|
LOT: (8) Metal Totes
|
LOT: (12) Stackable Metal Totes
|
6' x 3' Material Cart
|
LOT: (2) 44" Dia. Drum Fans, (1) 36" Dia. Drum Fan
|
LOT: (6) Pedestal Fans
|
LOT: PlasmaCAM DHC 6' x 6' Plasma Table, Hypertherm Powermax 900 Plasma Cutting System, S/N 900-014137
|
Tarpon Automation Parts Feeder, S/N 8317-1
|
Air Compressor, 10 HP
|
LOT: (7) Assorted Air Tanks
|
Tepco Dust Collector
|
LOT: (1) 20 HP Motor, (1) Electric Motor
|
LOT: (6) Assorted Platforms, (3) Metal Tubs w/Wheels, (2) Foreman Desks, etc.
|
Badland Winches, 12,000 Lb. Cap. Winch
|
LOT: Heavy Duty Rack, Rolling Cabinet w/Contents
|
Pipe Threading Stand w/Pipe Vise
|
LOT: (4) HD Steel Stands
|
LOT: (3) Material Cart Handles
|
LOT: Assorted Metal & Plastic Totes Outside
|
LOT: Contents of Shipping Office: Zebra ZT410 Thermal Printer, Brother SX-4000 Typewriter, Desks, Cabinets (NO COMPUTER)
|
LOT: Contents of Loft above Sanding/Grinding Room: Contents of Spare Machine Parts
|
LOT: Contents of Loft above Office: Electrical Components, Plumbing, Hardware, etc.
|
LOT: (9) Assorted Lifting Bars, Weights
|
Club/Weider Weight Bench w/Leg Workout
|
Weider Multiple Work Out Station
|
Weight Bench w/Leg Workout, Weight Bar Rack
|
Weider Pro 9640 Multiple Work Out Station
|
Weight Rack w/Assorted Weights, Belts, etc.
|
LOT: Olympic Free Weight Plates and Bar, (6) 45 lb., (12) 10 lb., (5) 5 lb.
|
LOT: Olympic Free Weight Plates and Bar, (2) 45 lb., (4) 35 lb., (10) 25 lb., (4) 10 lb., (8) 5 lb.
|
Weider 565 Multiple Workout Station
|
Parabody EX300 Multiple Work Out Station
|
Marcy Work Out Station
|
Sit Up/Crunch Station
|
Work Out Dummy
|
Wave Master Training Bag
|
Everlast Punching Bag
|
(3) Lifting Bars
|
Work Out Accessories
|
I-Fit Digital Treadmill
|
Life Styler Treadmill
|
Aero Star GS Exercise Stationary Bike
|
Elite Massage Table
|
Hex Tanning Booth, 7226 Hours Indicated
|
Vemco Mark XII V-Track Drafting Table, 7' x 46"
|
LOT: (3) Filing Cabinets, Cabinet w/Contents of Office Supplies
|
LOT: (Approx. 25) Assorted Stackable Chairs
|
LOT: (6) Die Blocks: (4) 22" x 10" x 9", (2) 35" x 12" x 9"
|