AERT

LOT: Shredder & Conveyor Line with Parts consisting of Lots #3, #4, #5, #6

Lindner Single Rotor Shredder Model Meteor 2200, S/N 1424 (2007), (36) Cutters, 116.6 x 116.6 x 37 Cutter Form, 7 ft. Wide Rotor, Top Feed with Bolt on Hopper, Bottom Discharge with Hydraulically Operated Rotor Access Door, with Power Pack, Dual-Driven by (2) 132kw Motors, Operator Panel & Control Panel with Drives (#EC-774-02-035)

LOT: Spare Screens (in Shed B)

Meri/Voith Metal Slat Belt Infeed Conveyor Model PLB, S/N 02105 (2009), 2000mm Wide x 21,875mm Long Belt, Driven by 15kw Gear Motor (#EC-774-02-008)

Meri/Voith Metal Slat Belt Infeed Conveyor Model PLB, S/N 02104 (2009), 2000mm Wide x 29,625mm Long Belt, Driven by 15kw Gear Motor (#EC-774-02-009)

LOT: Clarifier Line consisting of Lots #8 through #22 (platform included in this bulk lot)

Meri/Voith Delta Purge NG Clarifier, S/N 02151 (2009), Stainless Steel Bolt-Together Vessel, 362 in. Dia. x 43-1/2 in. Deep., Rated 1141 Gallons Per Minute (#EC-774-02-029)

Control Panel with PLC

Meri/Voith WSR Elephant Strainer Model ET7.16, S/N 02118 (2009), 1000 Gallons per Minute Max. Throughput, Stainless Steel Bolt-on Top Cover with Hinged Access Doors, Driven by Approx. 5 HP, 460 Volt, 1765 RPM Gear Motor, (14) 64 in. Dia. Filter Screens, Spray Bar Assembly (#EC-774-02-031)

T&S Mobile Gantry Crane Model AHS-4-15-14, S/N 5263937 (2005), 4000 lb. Capacity, 14 ft. Wide, with Adjustable Height Cross Beam and Chain Fall

National Oilwell Pump, S/N M96645 (2009), Carbon Steel, Size 5x4x14, Driven by 75 HP, 230/460 Volt, 1775 RPM Motor

Soft Start Panel

Pioneer Trash Pump, Carbon Steel, Driven by 75 HP, 230/460 Volt, 1770 RPM Motor

Soft Start Panel

National Oilwell Pump, S/N M98104 (2009), Carbon Steel, Size 8x6x14, Driven by 125 HP, 460 Volt, 1785 RPM Explosion Proof Motor (#EC-774-02-046)

Mepco Progressing Cavity Pump, Carbon Steel, Driven by 3.7kw, 208-230/460 Volt, 1745 RPM Motor

LOT: A&B Process Tank, S/N 1002740304A (2009), 6100 Gallons, 118 in. Dia. x 10 ft. Straight Side, Open Top - No Cover, Flat Bottom, 8 in. Side Bottom Outlet (#EC-774-02-076), A&B Process Tank, S/N 1002740304B (2009), 6100 Gallons, 118 in. Dia. x 10 ft. Straight Side, Open Top - No Cover, Flat Bottom, 8 in. Side Bottom Outlet (#EC-774-02-075), with Catwalk

A&B Process Tank, S/N 1002740303 (2009), 530 Gallons, 54 in. Dia. x 53 in. Straight Side. 3 in. Side Bottom Outlet, Open Top, Flat Bottom, (4) Stainless Steel Side Legs Mounted on Carbon Steel Frame

Vincent Screw Press Model VP-22-P, S/N 06299, Top Feed, End Discharge, Approx. 22 in. Dia. x 84 in. Long Screw, 60 in. Long Screen Section with Bottom Drip Pan, Driven by 75 HP, 230/460 Volt, 1190 RPM Motor, with 43:1 Reducer (#EC-774-02-056)

Vincent Screw Press Model VP-22-P, S/N 78020-B, Top Feed, End Discharge, Approx. 22 in. Dia. x 84 in. Long Screw, 60 in. Long Screen Section with Bottom Drip Pan. Driven by 75 HP, 230/460 Volt, 1770 RPM Motor, with Falk Reducer - No Ratio, with Pump & Heat Exchanger (#EC-774-02-055)

LOT: Pleated Belt Conveyor, 22 in. Wide, 13 ft. Long Bottom Horizontal Section, 15 ft. Long Incline Section, Driven by 5 HP, 208-230/460 Volt, 1750 RPM Motor with Torque Arm Reducer (#EC-774-02-018), Floor Mounted Super Sack Load Out Stand, 42 in. Wide x 66 in. Long x 77 in. High, Approx. 40 in. Long Bag Hold Section

LOT: Pulper Line consisting of Lots #24, #25, #26

Meri/Voith Pulper Model ST7(c), S/N 02108 (2009), Approx. 14 ft. Dia. x 106 in. Straight Side, Open Top, Dished Bottom, Bolt-Together Vessel, Bottom Driven by 400 HP, 460 Volt, 1190 RPM Motor, Off-Center Bottom Outlet connecting to Junk-O-Mat Tank, Soft Start Panel (#EC-774-02-051, #EC774-02-081)

Meri/Voith Contaminex Pump Model CM20EP.16, S/N 02111 (2009), Carbon Steel, Driven by 125 HP, 230/460 Volt, 888 RPM Motor (#EC-774-02-040)

Prime S Trash Pump Model S-8, S/N 708079, Carbon Steel, Driven by 40 HP, 230/460 Volt, 1765 RPM Motor (#EC-774-02-039)

Spare 400 HP Motor for Pulper, 460 Volt, 1190 RPM (#EC-774-10-019) (located at Lowell plant)

Spare Rotor for Pulper, Stainless Steel (located in Barn A)

Meri/Voith Screenex Inclined Dewatering Conveyor Model TSX-60-3-25, S/N 02110 (2009), Stainless Steel Housing, Approx. 22 in. Dia. x 270 in. Long Carbon Steel Auger, Top Feed, End Bottom Liquid Outlet, Driven by 5.5kw Motor

Voith Centri Sorter Model ST200BR, S/N STB-1497 (2009), Bump Type Rotor, Driven by 100 HP, 230/460 Volt, 1785 RPM Explosion Proof Motor, Base Mounted (#EC-774-02-053)

LOT: Drum Screen Line with Conveyors consisting of Lots #32, #33, #34, #35

Meri/Voith Trommel Drum Screen Model STR-9R, S/N 02112 (2009), Stainless Steel, Perforated Drum with Flights, Approx. 98 in. Dia. x 16 ft. Long, Bottom Drip Pan, End Discharge Chute, Driven by 20 HP, 230/460 Volt, 1760 RPM Motor, with Reducer (#EC-774-02-052)

Meri/Voith Vibratory Conveyor Model MVC1000, S/N 02153 (2009), Stainless Steel Construction, 60 in. Wide x 82 in. Long x 10 in. Deep Pan, Mounted on Carbon Steel I-Beam Frame (#EC-774-02-060)

Meri Auger Conveyor Model MSC60, S/N 02114 (2009), Stainless Steel Trough, Approx. 21 in. Dia. x 125 in. Long Carbon Steel Auger, Driven by 5.4 HP Motor (#EC-774-02-004)

Meri Auger Conveyor Model MSC60, S/N 02157 (2009), Stainless Steel Trough, Approx. 21 in. Dia. x 125 in. Long Carbon Steel Auger, Driven by 5.4 HP Motor (#EC-774-02-003)

Poly Tank, 1000 Gallon Capacity, S/N 290817785, Approx. 60 in. Dia. x 68 in. Straight Side, Dished Top, Flat Bottom (#EC-774-02-067)

FAN Press Screw Separator Model PSS, Carbon Steel, Driven by 10 HP, 230/460 Volt, 3490 RPM Motor

Meri/Voith Low Density Cleaner Model 12 in. LDC, S/N 02116 (2009), 1200 Gallons per Minute, with Junk Trap

Trumag/Meri Compax Screw Press Model CFX60R, S/N 11142 (2009), Driven by 30kw Motor (#EC-774-02-025, 028)

Trumag/Meri Compax Screw Press Model CFX60R, S/N 11141 (2009), Driven by 30kw Motor (#EC-774-02-024, 027)

Trumag/Meri Compax Screw Press Model CFX60R, S/N 11140 (2009), Driven by 30kw Motor (#EC-774-02-023, 026)

Meri Sedimator Model SMF28.1, S/N 02117 (2009), Stainless Steel, with Feed Hopper & Carbon Steel Discharging Hopper, Approx. 12 in. Dia. x 16 ft. Long Carbon Steel Screw, Driven by Approx. 5 HP Motor (#EC-774-02-006)

Rubber Belt Conveyor, Approx. 27 ft. Long x 32 in. Wide Belt, Carbon Steel Frame (#EC-774-02-013)

LOT: Shredder Line with Infeed & Outfeed Conveyors consisting of Lots #45, #46, #47, #48

Lindner Single Rotor Shredder Model Komet 1800, S/N 1379 (2007), (50) Cutters, 172 x 57 x 28 Cutter Form, Hydraulic Rotor Access with Power Pack, Bolt-on Feed Hopper, Bottom Discharge, Control Panel, Operator Panel with Siemens Simatic OP7 Controller, with Heat Exchanger, 37,000 lbs. (#EC-774-02-036)

Rubber Belt Incline Feed Conveyor, Carbon Steel, 60 in. Wide x 22 ft. Long Belt, Driven by Motor with Reducer (#EC-774-02-016)

Rubber Belt Inclined Discharge Conveyor, Stainless Steel, 49 in. Wide x 16 ft. Long Belt, Driven by 5 HP Gear Motor (#EC-774-02-017)

LOT: Spare Screens (in Shed B)

A&B Process Tank, S/N 1002740305-B, Stainless Steel, 11,475 Gallon Capacity, Approx. 12 ft. 6 in. Dia. x 150 in. Straight Side, Open Top, Flat Bottom, with Stainless Steel Welded Agitator Bridge, 3-Blade Turbine (#EC-774-02-069)

A&B Process Tank, S/N 1002740305-A, Stainless Steel, 11,475 Gallon Capacity, Approx. 12 ft. 6 in. Dia. x 150 in. Straight Side, Open Top, Flat Bottom, with Stainless Steel Welded Agitator Bridge, 3-Blade Turbine (#EC-774-02-068)

Jenkins 16 in. Gate Valve

All Prime Centrifugal Trash Pump Model S-8, S/N 408010, Carbon Steel, Driven by 75 HP, 230/460 Volt, 1775 RPM Motor, Mounted on Carbon Steel Frame (#EC-774-02-044)

All Prime Centrifugal Trash Pump Model S-8, Carbon Steel, Driven by 40 HP, 230/460 Volt, 1765 RPM Motor, Mounted on Carbon Steel Frame

Densifier, Stainless Steel, Approx. 48 in. Dia. x 70 in. Straight Side Vessel, 45-5/8 in. Tip-to-Tip Length x 5/8 in. High Single-Tier Bottom Blade, Top Feed, Side Bottom Discharge with Air Operated Door, Driven by 400 HP, 1780 RPM Motor (#EC-774-01-001)

Densifier, Stainless Steel, Approx. 48 in. Dia. x 70 in. Straight Side Vessel, 45-5/8 in. Tip-to-Tip Length x 5/8 in. High Single-Tier Bottom Blade, Top Feed, Side Bottom Discharge with Air Operated Door, Driven by Approx. 400 HP, 1780 RPM Motor (#EC-774-01-002) (motor will be swapped out for serviceable spare motor)

Densifier, Stainless Steel, Approx. 48 in. Dia. x 70 in. Straight Side Vessel, 45-5/8 in. Tip-to-Tip Length x 5/8 in. High Single-Tier Bottom Blade, Top Feed, Side Bottom Discharge with Air Operated Door, Driven by Approx. 400 HP, 1780 RPM Motor (#EC-774-01-003)

Densifier, Stainless Steel, Approx. 48 in. Dia. x 70 in. Straight Side Vessel, 45-5/8 in. Tip-to-Tip Length x 5/8 in. High Single-Tier Bottom Blade, Top Feed, Side Bottom Discharge with Air Operated Door, Driven by Approx. 400 HP, 1780 RPM Motor (#EC-774-01-004)

Bunting Magnetics Rubber Belt Conveyor, Carbon Steel, 33 in. Wide x 66 ft. Long Belt, Driven by 3 HP, 208-230/460 Volt, 1760 RPM Gear Motor with Reducer, Mounted on Carbon Steel Legs (#EC-774-01-029)

Carbon Steel Bin, 42 in. Wide x 84 in. Long x Approx. 44 in. Deep, Open Top, Coned Bottom, Bidirectional Discharge with (2) Carbon Steel Screw Conveyors with Approx. 16 in. Dia. x 11 ft. Long Screws, Mounted on Carbon Steel Frame

Carbon Steel Bin, 42 in. Wide x 84 in. Long x Approx. 44 in. Deep, Open Top, Coned Bottom, Bidirectional Discharge with (2) Carbon Steel Screw Conveyors with Approx. 16 in. Dia. x 11 ft. Long Screws, Mounted on Carbon Steel Frame

Carbon Steel Bin, Approx. 48 in. Wide x 84 in. Long x 44 in. Deep, Open Top, Coned Bottom, Bidirectional Discharge with (2) Carbon Steel Screw Conveyors with Approx. 16 in. Dia. x 11 ft. Long Screws, Mounted on Carbon Steel Frame

Inclined Rubber Belt Feed Conveyor, Carbon Steel, 66 in. Wide x 24 ft. Long Belt, with Motor, Mounted on Carbon Steel Frame

Inclined Rubber Belt Feed Conveyor, Carbon Steel, 66 in. Wide x 24 ft. Long Belt, with Motor, Mounted on Carbon Steel Frame

Inclined Rubber Belt Feed Conveyor, Carbon Steel, 66 in. Wide x 24 ft. Long Belt, with Motor, Mounted on Carbon Steel Frame

Cyclone, Carbon Steel, Approx. 8 ft. Dia. x 94 in. Straight Side, 16 ft. Coned Bottom (damaged side wall), Mounted on Carbon Steel Frame, includes Kimbell Gin Machinery (KGM) Rotary Valve Model KGM with 24x26 Vacuum, S/N 30393, Driven by 5 HP Gear Motor with Reducer, includes Carbon Steel Screw Conveyor with Approx. 6 in. Dia. x 9 ft. Long Screw, Driven by 3 HP Gear Motor with 24.71:1 Ratio Reducer (#EC-774-01-044, 036, 018)

Cyclone, Carbon Steel, Approx. 8 ft. Dia. x 94 in. Straight Side, 16 ft. Coned Bottom, Mounted on Carbon Steel Frame, with Rotary Valve Driven by 5 HP Gear Motor with Reducer (#EC-774-01-045)

Kimbell Gin Machinery (KGM) Blower Model KGMD30, Carbon Steel, Driven by 15 HP, 230/460 Volt, 1765 RPM Motor (#EC-774-01-037)

LOT: Equipment Line with Platform consisting of Lots #69 through #78

Kimbell Gin Machinery (KGM) Cyclone, Carbon Steel, Approx. 5 ft. Dia. x 54 in. Straight Side, 72 in. Coned Bottom, includes Rotary Valve Model KB 20x20 Vacuum, S/N 30444, Driven by 5 HP Gear Motor, Mounted on Carbon Steel Frame (#EC-774-01-013)

Rotary Screener/Scalper, Carbon Steel, 36 in. Dia. x 10 ft. Long Drum, with Approx. 5/16 in. Screen Holes, Coned Bottom Discharge, Driven by 5 HP, 208-230/460 Volt, 1725 RPM Motor (#EC-774-01-034)

Screw Conveyor, Carbon Steel, Approx. 12 in. Dia. x 78 in. Long Screw, Driven by 2 HP, 208-230/460 Volt, 1750 RPM Motor, Mounted on Carbon Steel Frame

Screw Conveyor, Carbon Steel, 8-1/2 in. Dia. x 16 ft. Long Screw, Driven by 3-1/2 HP Motor with Reducer

Screw Conveyor, Carbon Steel, 12 in. Dia. x 98 in. Long Screw, Driven by 5 HP Motor, Reducer with 23.46:1 Ratio (#EC-774-01-023)

MAC Rotary Valve Model MB75, S/N 142131-001-1, Driven by 2 HP Gear Motor, 40:1 Ratio (#EC-774-01-014)

Rapid Granulator Model 2442-11, S/N SQ644 (1991), Carbon Steel, Air Operated Forward Tilt Pelican Feed Hopper, Set Up for Bottom Blower Discharge, Driven by 100 HP, 230/460 Volt, 1775 RPM Motor, includes Start/Stop Panel & Soft Start (#EC-774-01-033), Rapid Granulator Spare Parts, consisting of Various Size Screens & Blades, Kimbell Gin Machinery (KGM) Blower Model KGMB 30, S/N 30433, Carbon Steel, Driven by 25 HP, 230/460 Volt, 1770 RPM Motor (#EC-774-01-031), Cyclone, Carbon Steel, includes Kimbell Gin Machinery (KGM) Rotary Valve Model KB 12X12, S/N 40003, Driven by 1 HP Gear Motor (#EC-774-01-016), Rapid Granulator Spare Parts, consisting of Various Size Screens & Blades, Kimbell Gin Machinery (KGM) Blower Model KGMB 30, S/N 30433, Carbon Steel, Driven by 25 HP, 230/460 Volt, 1770 RPM Motor (#EC-774-01-031), Cyclone, Carbon Steel, includes Kimbell Gin Machinery (KGM) Rotary Valve Model KB 12X12, S/N 40003, Driven by 1 HP Gear Motor (#EC-774-01-016)

LOT: Dual-Station Floor Mounted Super Sack Loader consisting of (1) KGM Cyclone with (1) Carolina Conveyor Rotary Valve, (1) Diverter Valve Mounted on 49 in. Deep x 137 in. Wide x 12 ft. High Carbon Steel Frame, includes (2) Floor Mounted Air Operated Bag Holders, 50 in. Long Bag Holding Posts, with Control Panel (#EC-774-03-001)

LOT: Prodex 6 in. Torquemaster Single-Screw Extruder Model TMH 600-30, 30:1 L/D Ratio, Electric Heated, Water Cooled with Closed Loop System and Pump Tank Heat Exchanger, 6-Zone Side Vented Barrel with Vacuum Pump, Approx. 42 in. Centerline Height, Water Cooled Feed Throat with Crammer Feeder Driven by 25 HP Motor with Reducer, Extruder Driven by 300 HP, 460 Volt, 1794 RPM Motor through Gear Box with 17.70:1 Ratio, includes Hydraulic 10 ft. Dia. Screen Changer with Power Pack and Cart, Gala Under Water Pelletizing Cutting Head Model 7, S/N 962239, with Water Chamber, Driven by 15 HP, 230/460 Volt, 3520 RPM Motor, Control Panel with Allen Bradley Power Flex 700H Drive, with (2) Spare Screws & (1) Spare Barrel (#EC-774-05-001, 012, 016, 002, 020), (1) Gala Centrifugal Pellet Dryer Model 12.3ECLN, 7.5 HP, (1) Fines Removal Screen Model FRS-160, (1) Tempered Water System Model TWS-120, (1) New York Blower, with Control Panel (#EC-774-05-023, 024, 022, 013), Sterlco Hot Oil Unit Model G9016-J1, S/N 95E5468, Driven by 36kw, 460 Volt Motor (#EC-774-05-021), Carbon Steel Shelving, (4) Tiers, with Spare Screens for Extruder/Screen Changer, Rotex Screener Model 11PS ASSS, S/N R198078A, Approx. 20 in. Wide x 48 in. Long Single Deck, Aluminum Clamp-on Cover, with Motor, Mounted on 4-Point Suspension in Carbon Steel Frame (#EC-774-05-020)

Baltimore Aircoil Chiller (BAC) Model VT0107, S/N U064440001 (#EC-774-05-025)

Carbon Steel Wash Basin, 71 in. Wide x 48 in. Straight Side x 42 in. Long Coned Bottom Tank, End Inlet, (6) Bottom Discharges, (5) Top Paddles, All Mounted on Carbon Steel Frame (#EC-774-09-002)

Carbon Steel Wash Basin, 71 in. Wide x 48 in. Straight Side x 36 in. Long Manifold Coned Bottom Tank, Welded Carbon Steel Top Mounted Feed Cyclone, (12) Bottom Discharges, All Mounted on Carbon Steel Frame (#EC-774-09-001, 013)

Floor Mounted Super Sack Loading Frame, Carbon Steel, 116 in. Long x 60 in. Wide x 89 in. High, 48 in. Long Bag Holding Rails, (2) 48 in. x 48 in. Floor Scales (no controllers)

Poly Storage Tank, 6000 L Capacity, Dished Top, Flat Bottom, Approx. 106 in. Dia. x 126 in. Straight Side (#EC-774-02-066)

Poly Storage Tank, 9000 L Capacity, Dished top, Flat Bottom. 144 in. Dia. x 138 in. Straight Side (#EC-774-02-065) (hole in top side)

Peerless Pump Model 8196LTP, S/N 9927129186-10A (2017), Carbon Steel, Size 2-3/10, Driven by 3 HP, 230/460 Volt, 1765 RPM Motor, Mounted on Carbon Steel Frame (#EC-774-10-001)

Carbon Steel Bin, Approx. 10 ft. Dia. x 200 in. Straight Side, Coned Bottom, (4) Carbon Steel Legs (#EC-744-04-018)

Peerless Pump Model 8196M, S/N 2696581, Carbon Steel, Size 2/3-10, Driven by 10 HP, 230/460 Volt, 1770 RPM Motor, Mounted on Carbon Steel Base (#EC-774-02-062)

LOT: Trommel Screen, Carbon Steel, Approx. 10 ft. Drum, Driven by 5 HP Gear Motor, End Feed, End & Bottom Discharge, includes Carbon Steel Bottom Fines Conveyor - 24 in. Wide x 27 ft. Long Belt with Motor, Carbon Steel Overs Discharge Conveyor - 25 in. Wide x 250 in. Long Belt with No Motor (#EC-774-02-058, 057, 073)

All Prime Trash Pump Model S-6, S/N 905021, Carbon Steel, Driven by 20 HP, 230/460 Volt, 1770 RPM Motor, Mounted on Carbon Steel Frame (#EC-774-09-007)

Recirculation Bin, Carbon Steel, 60 in. Wide x 120 in. Long x 60 in. Deep (#EC-774-09-004)

Recirculation Bin, Carbon Steel, 60 in. Wide x 120 in. Long x 60 in. Deep (#EC-774-09-005)

Gorman Rupp Trash Pump Model T6A60-B, S/N 972415, Carbon Steel, Driven by 40 HP, 208-230/460 Volt, 1770 RPM Motor, Mounted on Carbon Steel Frame (#EC-774-09-008)

Gorman Rupp Trash Pump Model T6A60-B, S/N 972413, Carbon Steel, Driven by 40 HP, 460 Volt, 1760 RPM Motor, Mounted on Carbon Steel Frame (#EC-774-09-009)

WAM/SPECO Dewatering Incline Conveyor, Stainless Steel, Approx. 12 in. Dia. x 13 ft. Long Carbon Steel Screw, with Gear Motor (#EC-774-09-017) (located outside behind Sheds A&B)

WAM/SPECO Dewatering Incline Conveyor, Stainless Steel, Approx. 12 in. Dia. x 18 ft. Long Carbon Steel Screw, with Bottom Hopper & Gear Motor (# EC-774-09-023) (located outside behind Sheds A&B)

WAM/SPECO Dewatering Incline Conveyor, Stainless Steel, Approx. 12 in. Dia. x 18 ft. Long Carbon Steel Screw, with Bottom Hopper & Gear Motor (#EC-774-09-024) (located outside behind Sheds A&B)

WAM/SPECO Dewatering Incline Conveyor, Stainless Steel, Approx. 12 in. Dia. x 13 ft. Long Carbon Steel Screw, with Carbon Steel Bottom Holding Tank & Gear Motor (#EC-774-09-018, 006) (located outside behind Sheds A&B)

PHI Approx. 20 Ton Manual Bench Hydraulic Compression Press Model PW220H, S/N 05-04-008 (2005), Electronic Heated Platens, 12-1/2 in. L/R, 12-1/2 in. F/B, (2) Temperature Controllers (#EC-774-06-022)

Hydraulic Pump with Reservoir Tank, Approx. 10 HP Motor, Mounted on Carbon Steel Frame with Casters

GSI Grain Dryer Model 1216, Electronic Monitoring Control Center, Gas Heated, Air Stream (#EC-774-12-003) (located outside - remove from frame for shipping)

Hutchinson/Mayrath Portable Enclosed Tube Incline Conveyor, S/N 926756, Carbon Steel, Approx. 10 in. Dia. x 34 ft. Long Screw (#EC-774-12-006) (located outside)

Rotex Screener Model 81-C-50, S/N C110376, Carbon Steel, with Stainless Steel Clamp-on Cover, Approx. 48 in. Wide x 12 ft. Long (#EC-774-09-069) (located outside - no screens)

Process Equipment Dewatering Waterfall Screen Model D5540 12MK4, S/N B93670-40239, Carbon Steel, 72 in. Wide x 52 in. Long Screen (#EC-774-09-068) (located outside)

South Silo #8: Imperial Industries Silo, S/N I-25940-2, Carbon Steel, Approx. 12 ft. x 34 ft., 2983 cu. ft. (#EC-774-03-041) (subject to sale of building)

South Silo #14: Imperial Industries Silo, S/N I-46495-2, Carbon Steel, Approx. 12 ft. x 38 ft., 3126 cu. ft. (#EC-774-03-043) (subject to sale of building)

South Silo #13: Imperial Industries Silo, S/N I-46495-1, Carbon Steel, Approx. 12 ft. x 38 ft., 3126 cu. ft. (#EC-774-03-042) (subject to sale of building)

South Silo#2: Peabody TecTank Bolt Together Silo, Carbon Steel. Approx. 12 ft. x 48 ft., 4690 cu. ft. (#EC-774-03-037) (subject to sale of building)

South Silo #6: Imperial Industries Silo, S/N I-25940-1, Carbon Steel, Approx. 12 ft. x 34 ft., 2983 cu. ft. (#EC-774-03-040) (subject to sale of building)

South Silo #3: Peabody TecTank Bolt Together Silo, Carbon Steel. Approx. 12 ft. x 48 ft., 4690 cu ft. (#EC-774-03-038) (subject to sale of building)

South Silo #4: Peabody TecTank Bolt Together Silo, S/N 6-81976, Carbon Steel, Approx. 12 ft. x 48 ft., 4690 cu. ft. (#EC-774-03-039) (subject to sale of building)

North Silo #2: Imperial Industries Silo, Carbon Steel. Approx. 12� x 33�, 2800 cu. ft., with Top Mounted Bin Vent Dust Collector, Bottom Carbon Steel Screw Conveyor, and MAC Rotary Valve (#EC-774-03-036) (subject to sale of building)

North Silo #1: Imperial Industries Silo, Carbon Steel, Approx. 12 ft. x 33 ft., 2800 cu. ft., with Top Mounted Bin Vent Dust Collector, Bottom Carbon Steel Screw Conveyor, and MAC Rotary Valve (#EC-774-03-035) (subject to sale of building)

North Quarantine Silo #2: Peabody TecTank Silo, S/N 65119, Carbon Steel, Approx. 12 ft. x 36 ft., 2860 cu. ft., with Top Mounted Bin Vent Dust Collector & MAC Rotary Valve (#EC-774-03-034) (subject to sale of building)

North Quarantine Silo #1: Peabody TecTank Silo, S/N 65113, Carbon Steel, Approx. 12 ft. x 36 ft., 2860 cu. ft., with Top Mounted Bin Vent Dust Collector & MAC Rotary Valve (#EC-774-03-033) (subject to sale of building)

North Blending Silo: Columbian TecTank Silo, S/N 94082, Carbon Steel, Approx. 10 ft. x 51 ft., 2910 cu. ft., with Top Mounted Bin Vent Dust Collector & MAC Rotary Valve (#EC-774-03-032) (subject to sale of building)

North Silo #3: Peabody TecTank Bolt Together Silo, Carbon Steel, Approx. 12 ft. x 59 ft., 5690 cu. ft., with MAC Rotary Valve (#EC-774-03-031) (subject to sale of building)

North Silo #2: Peabody TecTank Silo, S/N 40810, Carbon Steel, Approx. 12 ft. x 59 ft., 5690 cu. ft., with MAC Rotary Valve (EC-774-03-030) (subject to sale of building)

North Silo #1: Peabody TecTank Silo, S/N 40809, Carbon Steel, Approx. 12 ft. x 59 ft., 5690 cu. ft., with MAC Rotary Valve (#EC-774-03-029) (subject to sale of building)

Southland Solutions Blower consisting of (1) Roots Rotary Lobe Blower Model 418 RAM-J, P/N 819750TR, S/N 1510924090, with Silencer & 60 HP Motor (#EC-774-03-018) (subject to sale of building)

Southland Solutions Blower consisting of (1) Roots Rotary Lobe Blower Model 418 RAM-J, P/N 819750RB, S/N 0606929032, with Silencer & 60 HP Motor (#EC-774-03-017) (subject to sale of building)

Southland Solutions Blower consisting of (1) Roots Rotary Lobe Blower Model 616 RAM-J, P/N 851450RB, S/N 0401971242, with Silencer & 75 HP Motor (#EC-774-03-016) (subject to sale of building)

MAC Dust Collector Model 54AV516-Style3 Filter, S/N 142162-004-1, Carbon Steel, with Top Mounted Blower (#EC-774-03-067) (subject to sale of building)

MAC Dust Collector (#EC-774-03-026) (subject to sale of building)

Elevated Truck Loading System (subject to sale of building)

Sullair 125 HP Skid Mounted Rotary Air Compressor Model LS-200S, S/N 200604230001, 67,000 run hours, 41,000 load hours (subject to sale of building)

Sullair 40 HP Horizontal Tank Mounted Rotary Air Compressor Model LS-10, S/N 003-107773, 48,361 hours (subject to sale of building)

Sullair 40 HP Horizontal Tank Mounted Rotary Air Compressor Model LS-10, S/N 003-100256, 64,290 hours (subject to sale of building)

VanAir Systems Refrigerated Air Dryer Model EMD 330A, S/N 08H-007552 (subject to sale of building)

Ingersoll Rand Refrigerated Air Dryer Model DXR 750A, S/N 953DXR2871 (subject to sale of building)

12 ft. High x 4 ft. Dia. (est.) Air Receiver Tank (subject to sale of building)

Floor Mounted Platform Scale, 5000 lb. Capacity, 48 in. Wide x 48 in. Long, with Weigh-Tronics Readout Model WI-125, S/N 075027

Process Equipment Dewatering Waterfall Screen Model D5540 12MK4, S/N B93670-40239, Carbon Steel, 72 in. Wide x 52 in. Long Screen (#EC-774-09-067) (located outside)

LOT: Key Dollar Roll Press & Micro Screen Separator (located outside behind Sheds A&B)

LOT: Carter Day Pellet Spin Dryer & (2) Screen Baskets (located outside behind Sheds A&B)

LOT: (2) WAM Twin Dewatering Screws (located outside behind Sheds A&B)

LOT: (6) Assorted Key Dollar Micro WW Screens with (2) Separators, Stainless Steel Tank & Knife Gate Valve (located outside behind Sheds A&B)

WAM/SPECO Dewatering Incline Conveyor, Stainless Steel, Approx. 12 in. Dia. x 18 ft. Long Carbon Steel Screw (#EC-774-09-021) (located outside behind Sheds A&B)

Inclined Auger Conveyor (located outside behind Sheds A&B)

All Prime Pump Model S-8

Pioneer Pump Model S-8

Skid Mounted 40 HP Motor

ABB 15 kw Motor

Mission Magnum Pump

Bauer Fan Separator Gear Box

Goulds Multi-Stage Pump & Motor

Moyno Sludge Pump

7.5 HP Hydraulic Power Unit

Hope Industrial Systems Densifier Control Panel

Hope Industrial Systems Densifier Control Panel

Hope Industrial Systems Control Panel

12 ft. x 12 ft. x 104 in. High Modular Office Structure

1969 Fruehauf 40 ft. Tandem-Axle Dry Van Trailer, VIN MAJ-168523 (no title - delay removal one week)

LOT: Contents of Trailer including Large Quantity of Wire

LOT: (2) Gaylord Platforms & Custom Forklift Bucket

Carbon Steel Fuel Tank, 48 in. Dia. x 60 in. Straight Side on Carbon Steel Frame, with Spill Containment & Canopy (#EC-774-12-005, 004)

LOT: (3) Racks with Assorted Pipe

LOT: 40 ft. Storage Container with Contents including Assorted Hose, Wire, Filters, etc.

LOT: 40 ft. Storage Container with Contents including (1) Spool of Heavy Wire

Boy Injection Molder Model 22A, S/N 39206 (2003), with Procan C Operator Panel (located at Lowell plant)

2005 Walinga Ultra-Vac Trailer Mounted Diesel Powered Vacuum Unit Model 5614D, VIN 2W9MT151969001029, John Deere 4-Cylinder, 4.5 L Turbo Diesel (low use - located at Lowell plant)

Lull 10,000 lb. Telescopic Forklift Model MLULL 10K, S/N CP1144-5-350, John Deere 6-Cylinder Diesel Turbo, 25 ft. Reach, 30 ft. Lift, Fork Positioners, 456 hours indicated (needs brake work - located at Lowell plant)

1993 Freightliner Day Cab, VIN 1FUY3LYBBPP445369, Cummins L10-330E, 330 HP Turbo Diesel, Manual Transmission, with Merritt Headache Rack, 187,820 miles indicated (located at Lowell plant)

2006 Ford Crew Cab Short Bed Pick-up Truck Model F-150 XLT, Triton 5.4 L Gasoline Motor, Automatic Transmission, 2-Wheel Drive, 284,931 miles indicated (located at Lowell plant)

Lindner Shredder Model MS1500, S/N 928, no motor (for repair or parts - located at Lowell plant)

200 HP Hydraulic Power Unit

M.A. Industries Inc. 100 HP Granulator Model 1128A200, S/N P737-1008, with Hood (located at Lowell plant)

LOT: (3) Hydraulic Power Units - (2) 150 HP, (1) 15 HP (located at Lowell plant)

LOT: (2) Vincent 16 in. Dewatering Presses with Stainless Doors (located at Lowell plant)

Nelmor 31-1/2 in. x 57-1/2 in. Granulator (located at Lowell plant)

Composite Wood Board Steamer, includes TAK AGI Water Heater Model T-K-JR, S/N 24006231, Approx. 12 in. Wide x 244 in. Long x 9 in. Deep Chamber, Mounted on Legs with Casters, Hinged Cover (located at Lowell plant)

150 HP Electric Motor (located at Lowell plant)

100 HP Electric Motor (located at Lowell plant)

100 HP Electric Motor (located at Lowell plant)

LOT: (6) Baldor Electric Motors - (1) 7.5 HP, (2) 5 HP, (2) 3 HP, (1) 1 HP (all new in box - located at Lowell plant)

LOT: (8) Baldor Electric Motors - (2) 5 HP, (3) 3 HP, (2) 2 HP, (1) 1 HP (all new in box - located at Lowell plant)

LOT: (6) Baldor Electric Motors - (1) 10 HP, (3) 3 HP, (2) 1/2 HP (all new in box - located at Lowell plant)

LOT: Assorted Dodge Gear Reduction Motors (seven new in box) on (1) Pallet (located at Lowell plant)

Eagle 110 Gallon Vertical Drum Flammable Liquid Storage Cabinet

Liftable Steel Storage Cabinet

Justrite 60 Gallon Flammable Liquid Storage Cabinet

48 in. x 48 in. Steel Fabrication Table with 6 in. Vise

53 in. x 53 in. Steel Fabrication Table

96 in. x 40 in. Steel Fabrication Table

LOT: Assorted Steel Horses & Work Stands

LOT: (1) Section Pallet Rack with Assorted Contents

LOT: Large Assortment of Machinery Belts

Central Hydraulics 20 Ton H-Frame Press (no jack)

LOT: (2) Hardware Bins with Hardware

Eagle 120 Gallon Flammable Liquid Storage Cabinet

42 in. Drum Fan

42 in. Drum Fan

42 in. Drum Fan

42 in. Drum Fan

42 in. Drum Fan

42 in. Drum Fan

LOT: Sacks & Moisture Shield

LOT: Azbil Electromagnetic Flow Meter Model W3000, Bray Controls

Forklift Boom

Forklift Man Cage

Skid Steer Fork Attachment

LOT: Torch Cart, Floor Striper, Hand Dolly

LOT: (2) Drum Containment Tubs

LOT: Ice Melter on (1) Pallet

Manitowoc Ice Maker Model 5420

Cascade Forklift Bale Clamp & Rotator (located in Barn A)

LOT: Stainless Steel Flanges, Elbows & Tees (located in Barn A)

Dual Scale Platform, No DRO (located in Barn A)

LOT: (3) Electrical Panel Boxes (located in Barn A)

LOT: (17) Eagle Column Protectors (located in Barn A)

Lockable Steel Cage (located in Barn A)

LOT: (3) Altivar 71 Drives (located in Barn A)

LOT: Assorted Stainless Steel Pipe (located in Barn A)

Mack Sludge Truck Model R (no title - as is)

Ford 6-Cylinder Diesel Tractor (as is)

LOT: Assorted Contents of (8) Aisles including Electrical & Plumbing Supplies, Fittings & Boxes (located in Barn B)

LOT: 6 ft. High Steel Rack with Contents of Rollers & Hardware (located in Barn C)

LOT: 6 ft. High Steel Rack with Contents of Electric Motors, etc. (located in Barn C)

LOT: 6 ft. High Steel Rack with Contents of Gear Reduction Motors (located in Barn C)

LOT: 6 ft. High Steel Rack with Assorted Contents (located in Barn C)

Conveyor Drive Motor (located in Barn C)

LOT: Assorted Conveyor Belt on (6) Pallets (located in Barn C)

LOT: Assorted Conveyor Belt & Machinery Belts on (5) Pallets (located in Barn C)

RF Valve Pneumatic Gate Valve (located in Barn C)

Notus Pneumatic Butterfly Value (located in Barn C)

LOT: Assorted Valves on (3) Pallets (located in Barn C)

LOT: Sludge Pump, 15 HP Electric Motor, Assorted Valves (located in Barn C)

Fork Attachment (located in Barn C)

LOT: 60 HP Electric Motor & Gear Reduction Unit (located in Barn C)

LOT: Hanging Utility Track (located in Barn C)

LOT: Assorted Scrap Hoppers, Platforms & Cyclones (located outside)

LOT: (8) Grain Silos (located outside)

LOT: (7) Assorted Blowers & Conveyors (located outside)

Forkliftable Man Basket (located outside)

Pneumatic Dump Gate (located outside)

LOT: (4) Assorted Blowers (located outside)

16 in. Gate Valve (located outside)

LOT: Assorted Pumps & Valves

LOT: Steel Tank & Self Dumping Scrap Hopper

LOT: Assorted Bell & Gossett - ITT Industries Double Suction Split Case Centrifugal Pump, with 20 ft. Single-Axle Trailer (no title)

Trailer Mounted Sprayer (no title)

LOT: Assorted Steel I-Beams & Plate

LOT: Large Quantity of Assorted Duct

LOT: Large Quantity of Assorted Duct

LOT: A&B Process Stainless Steel Mixing Tank, Assorted Pumps, Duct & Pipe Fittings (located in far north yard)

16 ft. x 10 ft. Carpet

LOT: (2) Steel Horses

Non refundable deposit

Place holder