PULP PROCESSING - Chetwynd BCTMP Pulp Mill

Auction starts: September 13, 2022 at 02:00 AM EDT , Closing begins: October 31, 2022 at 02:00 AM EDT
Chetwynd, BC

Items

Hymac twin wire dewatering press mn PT-13-5, 12 ft wide, (3) tension rolls, (3) pinch rolls, drive roll set with dual 150 HP drives, Hymac 345SR 5.636:1/ 139 HP rated gear reducers, Nielsen end stageshredding roll and control cabinet (3RD FLOOR)
Hymac twin wire dewatering press mn PT-13-5, 12 ft wide, (3) tension rolls, (3) pinch rolls, drive roll set with dual 150 HP drives, Hymac 345SR 5.636:1/ 139 HP rated gear reducers, Nielsen end stageshredding roll and control cabinet (3RD FLOOR)
Lot of asst twin wire press parts, contents of (3) pallet racks and asst rolls (LOCATED 3RD FLOOR)
Lot of asst (NEW) wire press wires including (6) Albany Filtra Tech 22A rolls 145.67 in.�x 68.34 ft., (1) Albany Dura Tech 312B roll 145.67 in. x 27.67 in., and (4) asst Asten Johnson rolls (2) 145 in. x 68 ft.4 in., 145 in. x 72.6 in., 144 in. x 27.8 ft. (3RD FLOOR)
Lot of (2) Hymac twin wire dewatering presses (PARTS ONLY) (3RD FLOOR)
Impregnation Line consisting of Lots 84-90 (LOCATED ON 2ND AND 3RD FLOORS) - subject to piecemeal bids lots 84-90
Hymac double vertical impregnator screw, sn 6981, with twin chip drainers with drives (LOCATED ON 3RD FLOOR) - subject to entirety bid lot 83
Hymac CS-2420 stainless steel screw conveyor, 24 ft long X 20 in screw, sn 621-124 (discharge conveyor) (LOCATED ON 3RD FLOOR) - subject to entirety bid lot 83
A and F Industries screw conveyor approx 24 ft X 24 inch screw, info plate not on item (bypass conveyor) (LOCATED ON 3RD FLOOR) - subject to entirety bid lot 83
Impregnator hydraulic pump set with 125 HP motor, 1800 RPM with push button control( LOCATED ON 2ND FLOOR) - subject to entirety bid lot 83
Hymac hydraulic plug screw feeder (LOCATED 2ND FLOOR) - subject to entirety bid lot 83
Celleco 316 stainless steel disc filter / thickener, total of (36) 12 ft diameter segmented discs with stainless steel mesh, 1,200 TPD capacity PLC controls and asst metering gages as pictured (LOCATED ON 3RD FLOOR)
Nilsen 36 inch fluffer mixer, sn 8910 with 200 HP motor (LOCATED 2ND FLOOR MEZZ)
Nilsen 36 inch fluffer mixer, (NO PLATE) with 200 HP motor (LOCATED 2ND FLOOR MEZZ)
Hymac PSF-16 stainless steel plug screw feeder, sn 6858, 16 inch diameter screw, Hymac PSF-160 hydraulic back press discharge shute mn PSF-1619, and Siemens 300 HP motor 1150/1700 RPM, 500 volts, 3 phase (LOCATED 1ST FLOOR)
Hymac PSF-16 stainless steel plug screw feeder, sn 6859, 16 inch diameter screw, Hymac PSF-1619 hydraulic back press discharge shute, and Siemens 300 HP motor 1150/1700 RPM, 500 volts, 3 phase (LOCATED 1ST FLOOR)
Hymac stainless steel tapered plug screw feeder, 18-12 inch diameter tapered screw, Hymac PPSF-27 back press discharge shute, and 150 HP motor 500 volts, 3 phase (MISSING GEAR BOX) (LOCATED 1ST FLOOR)
Hymac stainless steel tapered plug screw feeder, 18-12 inch diameter tapered screw, Hymac PPSF-27 back press discharge shute, and 150 HP motor 500 volts, 3 phase (MISSING GEAR BOX) (LOCATED 1ST FLOOR)
Hymac stainless steel tapered plug screw feeder, 18-12 inch diameter tapered screw, Hymac back press discharge shute, and 100 HP motor 500 volts, 3 phase (LOCATED 1ST FLOOR)
Hymac stainless steel tapered plug screw feeder, 18-12 inch diameter tapered screw, Hymac back press discharge shute, and 100 HP motor 500 volts, 3 phase (LOCATED 1ST FLOOR)
Hymac stainless steel tapered plug screw feeder, 18-12 inch diameter tapered screw, 100 HP motor 500 volts, 3 phase (LOCATED 1ST FLOOR)
Hymac HSD-64 TMP 64 inch Refiner, sn 631-120-6865 including Siemens 1DL 7641-8FF-82-Z water cooled drive motor 14,000 HP, 13,800 volts, 1800 rpm, with Siemens Exciter panel, hydraulic and auto lube units below, agitated cyclone feeder, and control console (LOCATED GROUND FLOOR MEZZ AND BELOW)
Hymac HSD-64 TMP 64 inch Refiner, sn 631-140-6866 including Siemens 1DL 7641-8FF-82-Z water cooled drive motor 14,000 HP, 13,800 volts, 1800 rpm, with Siemens Exciter panel, hydraulic and auto lube units below, agitated cyclone feeder, and control console (LOCATED GROUND FLOOR MEZZ AND BELOW)
Hymac HSD-64 TMP 64 inch Refiner, sn 631-220-6867 including Siemens 1DL 7641-8FF-82-Z water cooled drive motor 14,000 HP, 13,800 volts, 1800 rpm, with Siemens Exciter panel, hydraulic and auto lube units below, agitated cyclone feeder, and control console (LOCATED GROUND FLOOR MEZZ AND BELOW)
Hymac HSD-64 TMP 64 inch Refiner, sn 631-240-6868 including Siemens 1DL 7641-8FF-82-Z water cooled drive motor 14,000 HP, 13,800 volts, 1800 rpm, with Siemens Exciter panel, hydraulic and auto lube units below, agitated cyclone feeder, and control console (LOCATED GROUND FLOOR MEZZ AND BELOW)
Hymac HSD-64 TMP 64 inch Refiner, sn 631-320-6869 including Siemens 1DL 7641-8FF-82-Z water cooled drive motor 14,000 HP, 13,800 volts, 1800 rpm, (motor inoperable, requires repair) with Siemens Exciter panel, hydraulic and auto lube units below, agitated cyclone feeder, and control console (LOCATED GROUND FLOOR MEZZ AND BELOW)
TWIN WIRE PRESS drive shaft (WAREHOUSE)
Lot of (5) crates of twin wire press parts (WAREHOUSE)

Copyright © Proxibid Inc. t/a Wavebid 2024