Chicago Heights, IL
Auction Type: Online
Items
Milwaukee Magnetic Drill
|
Jancy Magnetic Slugger Model USA5000
|
LOT: Assorted Slugger Drill Bits
|
Dewalt Combination Drill, Impact, Charger & Battery
|
LOT: (3) Assorted Drills
|
Ryobi 1600 PSI Electric Pressure Washer
|
LOT: (2) Dynabrade Pneumatic Sanders, (2) Pneumatic Grinders
|
LOT: (2) Torque Wrenches
|
LOT: (1) 1/2 in. Impact, (1) Right Angle Die Grinder, (1) Chisel, (6) Pneumatic Drills
|
LOT: (1) 1 in. Pneumatic Wrench, (1) 1/2 in. Pneumatic Wrench
|
LOT: (1) Monti Bristle Blaster (new in case), (1) Makita 7-1/4 in. Saw
|
LOT: (3) Milwaukee 4-1/2 in. Right Angle Grinders (one new), (1) Milwaukee 7 in. Right Angle Grinder
|
LOT: (1) Drill Doctor, (1) Darpa Vibratory Scraper
|
LOT: (1) Pneumatic Sander, (1) Dremel Kit, (1) Dewalt Palm Sander
|
LOT: (2) Milwaukee 3/4 in. Drills (one needs repair)
|
Bosch SDS 11232EVS Hammer Drill
|
Milwaukee 1/2 in. Hammer Drill
|
Dewalt 1/2 in. Right Angle Drill
|
LOT: (1) Dewalt Sawzall, (1) Black & Decker Jig Saw, (1) Weller Soldering Gun
|
LOT: (2) Snap-On Tap & Die Sets, (1) Tap & Die Set
|
LOT: (2) Gas Chain Saws
|
LOT: New Nylon Lifting Straps, Assorted Safety/Fall Equipment
|
LOT: Assorted Gloves in (2) Cartons & (1) Plastic Bin, (1) Husky LED Work Light
|
Bosch 11-304 Electric Demolition Hammer
|
Dyna-Glo Pro 180,000 BTU Kerosene Heater
|
Rockwell Hardness Tester
|
52 in. Bench Center
|
36 in. x 60 in. x 10 in. Granite Surface Plate, S/N 15495024-781
|
Scherr-Tumico 42 in. - 48 in. Micrometer
|
Scherr-Tumico 36 in. - 42 in. Micrometer
|
Starrett 30 in. - 36 in. Micrometer
|
Starrett 24 in. - 30 in. Micrometer
|
Starrett 20 in. - 24 in. Micrometer
|
Starrett 16 in. - 20 in. Micrometer
|
Starrett 16 in. - 20 in. Micrometer
|
Brown & Sharpe 16 in. - 20 in. Micrometer
|
LOT: (2) 12 in. - 16 in. Micrometers
|
LOT: (3) 12 in. - 16 in. Micrometers
|
LOT: 11-Piece Micrometer Set
|
LOT: 9-Piece Micrometer Set
|
LOT: (3) 6 in. - 12 in. Micrometer Sets
|
LOT: (2) 6 in. - 9 in. Micrometer Sets
|
LOT: 4-Micrometer Set including 0 - 1 in., 1 in. - 2 in., 2 in. - 3 in., 3 in. - 4 in.
|
LOT: (4) Assorted Inside Micrometers
|
LOT: (2) Depth Gauges
|
LOT: (2) Coating Thickness Gauges
|
LOT: Assorted Inspection Equipment
|
LOT: Assorted Inspection Equipment
|
LOT: (3) Dial Gauge Bores, (2) Dial Gauge Setters
|
LOT: Assorted Blocks
|
LOT: Assorted Large Calipers
|
4-Wheel Cart
|
LOT: (5) Assorted Height Gages
|
LOT: Wax Sealer, Cabinet, Wax
|
LOT: (2) 1 Ton Chain Hoists, (1) 2 Ton Chain Hoist
|
LOT: (3) 1 Ton Chain Hoists
|
LOT: (3) 1/2 Ton Chain Hoists
|
LOT: (3) Skates
|
Double End Tool Grinder
|
Supfina Pneumatic Polisher
|
LOT: Assorted Tools (on cart)
|
LOT: (2) 4-Wheel Carts
|
LOT: (1) 8 ft. Fiberglass Ladder, (2) 4 ft. Fiberglass Ladders
|
Toolmex/TUR 630A 24 in. x 130 in. Double Chuck Geared Head Engine Lathe, S/N 48761, 1400 RPM, 16 in. 3-Jaw & 4-Jaw Chucks, Carriage with Cross Slide, Taper, Threading, Tailstock, Steady Rests, Coolant, Pan Bed, Newall DRO
|
LOT: Assorted Lathe Tooling & Cabinet
|
Work Table with 5 in. Vise
|
LeBlond Regal 16 in. x 60 in. Geared Head Engine Lathe, S/N 80-4764, 1800 RPM, 10 in. 4-Jaw Chuck, Carriage with Cross Slide, Taper, Threading, Tailstock, Steady Rests, Coolant
|
LOT: Assorted Lathe Tooling & Cabinet
|
Bridgeport 2 HP Variable Speed Vertical Mill, S/N HJ321571, 9 in. x 49 in. Power Feed Work Table, Acu-Rite DRO
|
Kurt 6 in. Machinist Vise
|
7 in. Machinist Vise
|
Bridgeport 1 HP Vertical Mill, S/N 50133, 9 in. x 42 in. Power Feed Work Table, DRO
|
LOT: (2) Boring Heads, (1) Set of V-Blocks
|
LOT: R8 Tooling
|
Cincinnati Horizontal Mill No. 2MI, S/N 2J2P6E-23, 500 RPM, 10 in. x 54 in. Work Table, Power Overarm with Vertical 1500 RPM Head, Coolant
|
LOT: Cincinnati Mill Tooling, Holders, Hold Downs, Cabinet, Work Table
|
Johnson Amada 20 in. Variable Speed Vertical Band Saw Model VAC-500, S/N 530441, 22 in. Round Vacuum Indexable Work Table, Butt Welder
|
Vertex Horizontal/Vertical Indexer with Tailstock
|
8 in. Swivel Machinist Vise
|
Spanco 2 Ton Adjustable Aluminum Portable Gantry, with Electric Chain Hoist
|
LOT: (2) Pedestal Fans
|
Brown & Sharpe 8 in. x 24 in. Hydraulic Surface Grinder, S/N N/A, Permanent Magnetic Chuck, Coolant
|
Atlas Floor Type Compound Mandrel Press
|
Famco No. 3 Floor Type Compound Mandrel Press
|
LOT: Baldor 10 in. Double End Pedestal Grinder
|
LOT: Lista 9-Door Cabinet with Tooling, Boring Bars, Inserts, Holders, 5C Collet Chuck & Collets, etc.
|
LOT: Work Table with Contents, (3) Machinist Vises, Wilton 4 in. Torpedo Vise, Assorted Tooling
|
Cataract Bench Lathe, with Carriage
|
LOT: Work Table with Contents, Assorted Tooling
|
Delta 20 in. Drill Press, with Crank Adjustable T-Slot Work Table
|
Craftsman 16 in. Drill Press
|
Morrison 1-1/4 in. Keyseater Model K, S/N K904740, with Accessories
|
LOT: 4-Drawer Cabinet with New Morrison Keyseater Cutters (metric & standard) & Assorted Inserts
|
LOT: Contents of (2) Cabinets including Carbide Inserts, Mills, Drills, Taps (cabinets not included)
|
12 in. Vertical/Horizontal Rotary Table
|
LOT: Assorted Mills
|
LOT: Assorted Reamers & Fasteners
|
LOT: Assorted Fasteners with Cabinet
|
LOT: Assorted Sunnen Accessories with Cabinet
|
LOT: Contents of Shelf including Assorted Morse Taper Drill Bits
|
LOT: Contents of Shelf including Assorted Horizontal Milling Cutters
|
LOT: Contents of Shelf including Assorted Taps
|
LOT: Assorted Fasteners with Shelving (as marked)
|
LOT: (2) Cabinets with Contents, Grinding Wheels (on wall)
|
LOT: Cabinet with Contents including Broaches & Broach Sets
|
LOT: (6) Shelves with Contents
|
LOT: Rack, Tool Steel, Brass, Stainless Steel & Steel in Assorted Shapes & Lengths, Threaded Rod, Cold Rolled Rounds
|
LOT: Abrasive Flap Wheels, Tool Steel, Bronze, Plastic, Strapping, Hose
|
LOT: Assorted Spade Drills
|
LOT: 9 in. Precision Shear, (3) Counterbore Sets, Triple-Beam Drug Scale
|
LOT: (4) Sets Tapping Heads with Disconnect Tool Holder
|
LOT: (2) Tapping Heads, Magnetic Plate, Fixture
|
LOT: Counter with Cubby Hole Cabinets including Lathe Tooling, Drill Bits, End Mills, Expanding Mandrel
|
LOT: Assorted Taps (new)
|
LOT: Assorted Taps in 30-Drawer Cabinet
|
LOT: Assorted Diamond Blade Cutters, Eye Bolts (new), Facom Snap Ring Pliers
|
LOT: Assorted Thread Dies, Taps, Acme Taps
|
LOT: Assorted Carbide End Mills in (2) Boxes
|
LOT: Assorted End Mills & Drills in (2) Boxes
|
LOT: Assorted Inserts & Diamond Cup Wheels
|
LOT: Assorted Reamers in (2) Wood Boxes & (3) Plastic Trays
|
LOT: 2-Door Cabinet with Assorted Tooling & Supplies
|
LOT: Assorted Tap Extractors, Taps, Grinding Tips, Multi-Drawer Cabinet
|
LOT: Assorted Thread Gauges in 2-Door Cabinet
|
LOT: (1) Portable Drill Press with Articulating Arm on 4-Wheel Cart
|
Faro Arm Portable Measuring Machine (2004), with Granite Top Storage Cart, Software, Computer & Case
|
Pruftechnik-Rotalign Ultra IS Portable Laser Shaft Alignment Machine Type ALI 4.202, S/N 43216681
|
Pruftechnik-Rotalign Ultra IS Portable Laser Shaft Alignment Machine, S/N 43213770
|
Pruftechnik-Rotalign Ultra Portable Laser Shaft Alignment Machine, S/N 43210987
|
SKF CMVA-60 Microlog, S/N 602283, with Accessories
|
Seagate 2 TB Expansion Desktop Drive, Hard Case
|
Emerson CSI2140 Machinery Health Analyzer, S/N B2140131195 01/14, with Accessories
|
Emerson CSI2140 Machinery Health Analyzer, S/N 2140131194 01/14, with Accessories
|
LOT: Emerson Process Management Accessories
|
Micronic Portaflow PF330 Ultrasonic Liquid Flowmeter, S/N 8724
|
Rockmate Portable Hardness Tester Model MRDR, S/N 3732
|
Mitutoyo SJ-201P Surface Roughness Tester
|
SKF Strobe Light Model CMSS6165
|
Dewalt DCT411 Inspection Camera
|
IRD 246 Mechanalysis Balancing Instrument
|
Belt Hog Pulley Alignment Tool
|
LOT: (1) 2-Door Steel Cabinet with Assorted Shims (in office)
|
LOT: (4) Assorted ToxiPro Gas Detectors with IQ Express Docking Station
|
Extech CFM/CMM Hot Wire Anemometer Model 407119
|
LOT: Assorted Inspection Equipment
|
Toshiba 40 in. Television
|
Mazak Smooth Technology 33 in. x 83 in. CNC Turning Center Model Quick Turn 450MY, S/N 296661 (2019), 2000 RPM, 21 in. 3-Jaw Chuck, Tool Eye, 12-Position Live Tool Turret, Steady Rest, Hydraulic Tailstock, Coolant, Chip Conveyor, including (3) Live Tools (671 hours indicated)
|
Mazak Quick Turn 32 in. x 118 in. CNC Turning Center Model Nexus 350-2MY, S/N 197908 (2007), 16 in. 3-Jaw Chuck, 12-Position Live Tooling Turret, Tailstock, Chip Conveyor, Coolant, Mazak Voice Advisor CNC Control, including (1) Live Tool (29,120 hours indicated)
|
(1) Live Tool for Lathe
|
(1) Live Tool for Lathe
|
(1) Live Tool for Lathe
|
(1) Live Tool for Lathe
|
(1) Live Tool for Lathe
|
LOT: (2) Tool Holders for Lathe
|
LOT: (6) Tool Holders for Lathe, (1) Repairable Live Tool
|
LOT: Lista 9-Drawer Cabinet with Contents including Tooling, Lathe Parts, etc.
|
LOT: Lista 9-Drawer Cabinet with Contents including Tooling, Lathe Parts, etc.
|
LOT: Lista 10-Drawer Cabinet with Contents including Boring Bars, Carbide Inserts
|
LOT: Steel Work Table, Pie Chucks, Foremans Desk
|
LOT: Lista 8-Drawer Cabinet with Contents including Sleeve Adaptors, Jaw Chucks
|
LOT: Lista 9-Drawer Cabinet with Contents including Boring Bars, Tool Holders
|
LOT: (3) Large Aluminum Pie Chucks (one new), (1) Taki #JB18 Jaw Boring Ring
|
Mazak 4-Axis CNC Vertical Machining Center Model Nexus 700E-II/50, S/N 228782 (2011), 6000 RPM, 27.5 in. x 80 in. Work Table, 24-Position ATC, 80 in. X-Axis, 27.6 in. Y-Axis, 28.3 in. Z-Axis, 12 in. Horizontal 4th Axis, Coolant, Mazatrol Matrix Nexus Voice Advisor Control (15,828 hours indicated)
|
Nikken 5th Axis Horizontal Indexer, 12 in. 6-Jaw Chuck, Tailstock
|
LOT: (4) Assorted 12 in. x 32 in. Drilled & Tapped Sub-Tables
|
8 in. Machine Vise, Swivel Plate
|
8 in. Machine Vise, Swivel Plate
|
LOT: Lista 10-Drawer Cabinet with Contents including End Mills, Boring Bars, Inserts, Drill Bits, Carbide Drill Bits
|
LOT: (12) CAT 50 Tool Holders, with Cart
|
LOT: (4) CAT 50 ER Collet Holders, Collets
|
LOT: CAT 50 Quick Change Holders
|
LOT: (11) Assorted CAT 50 Tool Holders
|
LOT: (24) Assorted CAT 50 Tool Holders, Cart
|
LOT: Assorted Angle Plates, 3-Jaw Chuck, Assorted Tooling, Multi-Drawer Cabinet on Steel Work Table
|
Toolmex FAT 25 in. x 118 in. Manual Plus CNC Lathe Model TUR 630SC X 3000, S/N 150531 (2015), 1800 RPM, 20 in. 4-Jaw Chuck, Carriage with T-Slot Cross Slide, Tool Post, Threading, Tailstock, (4) Steady Rests, Coolant, Siemens Sinumerik 828D Basic T CNC & Manual Controls (4,160 hours indicated)
|
Toolmex FAT 28 in. x 124 in. Geared Head Engine Lathe Model TUR 710 X 3000, S/N 120011 (2012), 1400 RPM, 20 in. 4-Jaw Chuck, Carriage with Cross Slide, Taper, Threading, Tailstock, (3) Steady Rests, Coolant, Pan Bed, Newall DRO
|
Axelson 28 in. x 80 in. Geared Head Engine Lathe Model A25, S/N 2477, 555 RPM, 24 in. 4-Jaw Chuck, Carriage with Cross Slide, Taper, Threading, Tailstock, (2) Steady Rests, (2) Centers, (3) Boring Bars, Coolant, Pan Bed
|
TMX 16 in. 6-Jaw Chuck Model T865-16in. (new)
|
19 in. 3-Jaw Chuck
|
Lathe Tool Holder, S/N 150531, H=184.97
|
LOT: Quick Change Tool Post with Holders, Table
|
LOT: Quick Change Tool Post with Holders, Table
|
LOT: Quick Change Tool Post with Holders, Table
|
LOT: Durham Portable Cabinet with Boring Bars, Inserts, Tooling, Carbide Tooling
|
LOT: (28) CAT 30 Tool Holders, Morse Taper Drill Bits, Steel Work Table
|
LOT: Wilton 4-1/2 in. Torpedo Vise, Steel Table, Rolling Cabinet with Contents including Hold Downs, Assorted Tooling
|
Tos Varnsdorf 3 in. Horizontal Boring Mill, 1400 RPM, 39.5 in. x 44 in. Manual Rotary Table, Enco Boring Head, Coolant, Trak 3-Axis DRO, Pendant Control
|
LOT: Mill Tooling, Hold Downs, V-Blocks on Steel Table
|
Fosdick 45 in. Arm x 12 in. (est.) Column Sensitive Radial Drill, S/N N/A, 24 in. x 48 in. Work Table, Power Table Elevation, T-Slot Base
|
8-1/2 in. Machinist Vise
|
8-1/2 in. Machinist Vise
|
6 in. Swivel & Bevel Machinist Vise
|
LeBlond Regal 24 in. x 240 in. Geared Head Engine Lathe, S/N 2H847, 5 in. Spindle Bore, 900 RPM, 24 in. 4-Jaw Chuck, Carriage with Cross Slide, Taper, Threading, Tailstock, Steady Rests, Pan Bed, Coolant
|
LOT: (1) Tool Post with Assorted Quick Change Tool Holders & Assorted Tooling, with (2) Tables
|
Tarnow 22 in. x 124 in. Geared Head Engine Lathe Model TUJ50M/120, S/N 3086 (1996), 16 in. 4-Jaw Chuck, Carriage with Cross Slide, Taper, Threading, Coolant, Newall DRO
|
LOT: (1) Tool Post with Assorted Quick Change Tool Holders & Assorted Tooling
|
LeBlond 60 in. x 96 in. Geared Head Engine Lathe, S/N N/A, 60 in. 4-Jaw Chuck, Carriage with Cross Slide, Tailstock, Steady Rest
|
Dufom 36 in. Vertical Turret Lathe, S/N 6873 (1979), 36 in. 4-Jaw Chuck, 40 in. Under Rail, Pendant Control
|
Ayer 20 ft. (est.) Sliding Head Hydraulic Shaft Straightening Press, with Remote Hydraulics
|
Giddings & Lewis 5 in. Horizontal Boring Mill Model 70-65-T3X, S/N 410-4-66 (1963), 60 in. x 122 in. Work Table, 48 in. x 60 in. Air Lift Rotary Table, 60 in. (est.) Vertical, 3-Axis DRO, with Non-Functioning Tape Reader, Manual Controls, Outboard Support, Right Angle Head
|
Union 5 in. Horizontal Boring Mill, S/N 8647, 70-5/8 in. x 78-1/2 in. Rotary Table, 108 in. Vertical, Facing Head, 3-Axis DRO, Outboard Support, Pendant Controls
|
Right Angle Head for Boring Mill
|
(1) Boring Head Set
|
(1) Boring Head
|
LOT: (3) Assorted Insert Style Milling Cutters - (2) 12-1/2 in., (1) 8-1/2 in.
|
40 in. x 36 in. x 60 in. T-Slot Angle Plate
|
LOT: (2) 12 in. x 48 in. x 48 in. Drilled & Tapped Angle Plates
|
LOT: (2) 10 in. x 20 in. x 30 in. Drilled & Tapped Angle Plates
|
30 in. x 16 in. x 30 in. T-Slot Angle Plate
|
LOT: (4) Sets V-Blocks (one on Union machine), with (3) Portable Carts
|
(1) 24 in. T-Slot Rotary Table on Mounting Plate
|
LOT: Lista 9-Drawer Tool Cabinet, with Contents
|
LOT: Assorted 50 Taper Tool Holders on 4-Wheel Cart
|
LOT: (1) Work Bench with Wilton 5 in. Vise, (1) Work Bench with Assorted Insert Style Milling Cutters,(1) Multi-Bin Steel Cabinet with Assorted Set-up Equipment
|
LOT: Assorted 50 Taper Tool Holders on 4-Wheel Cart & Rack with Assorted Tooling & Set-up Equipment
|
LOT: (1) Work Bench with 4 in. Vise & Assorted Tooling, 3-Drawer Tool Cart
|
LOT: (1) 30 in. x 120 in. Steel Work Bench with Assorted Tooling, 2-Drawer Table
|
7 in. Machine Vise on Mounting Plate
|
LOT: Assorted Set-up Blocks, Bars, etc. in Wood Cabinet, 4-Wheel Cart
|
HEM Horizontal Band Saw Model Cyclone, S/N 1144212, Power Clamp, Coolant, Pendant Control
|
Heavy Duty Double End Snag Grinder
|
Double End Edge & Wire Brush Grinder
|
Ex-Cell-O Double End Face & Edge Grinder
|
Worcester Double End Drill Pointer
|
Abrasive Cut-off Saw
|
Double End Tilting Table Tool Grinder
|
Wilton 6 in. x 12 in. Belt/Disc Sander with Dual Tilt Table
|
H-Frame Adjustable Ram & Bed Air/Hydraulic Shop Press
|
Tafa Portable Metalizing Gun Model 30-8B35, with Dual Feed Gun
|
Metco Plasma Spray Gun Model M3, Power Supply with Auto Control Module & Gas System
|
Betts & Bridgeford 48 in. x 240 in. Metalizing Lathe, S/N 4989, with Solid State Waterfall Dust Collector
|
Custom Portable Line Burning Table, with 15 ft. (est.) Track & Bug-O Line Burner
|
Vacu-Blast Corporation 100 lb. Portable Sand Blast Pot, with Hose & Vacuum
|
Empire Portable Blast Tank
|
LOT: Assorted Blast Media on (2) Skids
|
Pangborn 2-Hole Reach-in Sand Blast Cabinet
|
48 in. x 30 in. x 30 in. Deep Metalizing Spray Booth, with Power Shaft Rotator
|
Donaldson Torit Dust Collector
|
Justrite 12 Gallon Flammable Storage Cabinet
|
Climax Portable Machining System Model BB500, with Case & Accessories
|
Electro Arc Portable Tap Disintegrator Model 2S, S/N 14503, with 2-Way Adjustable Support Arm & Cart
|
Miller 300 Amp Portable Arc Welder Model Goldstar 300SS, with Cables & Clamps
|
(1) 2-Wheel Torch Cart with Hose, Torch, Regulator & Gauge
|
LOT: Assorted Welding Supplies on (2) Skids & (1) Box
|
LOT: Assorted Metalizing Wire on (1) Skid
|
LOT: Assorted Metco Parts, Supplies & Powder in (2) 2-Door Cabinets, (1) 2-Door Refrigerator, (1) Fairbanks Scale
|
LOT: (5) Assorted Steel Cabinets (in room with assorted supplies)
|
LOT: (2) Multi-Drawer Cabinets with Assorted Screws, etc., (2) Multi-Bin Cabinets with Assorted Fittings
|
Quincy Rotary Air Compressor Model QS-I245AOA21B, S/N 99451 (66,817 hours)
|
LOT: Assorted Strong Back Clamps & C-Clamps on Custom Rack
|
Valley Equipment Co. 6-Barrel Fluid Distribution Station, with Rack & Pump
|
LOT: Assorted Bar Stock & Cut-offs of Various Sizes consisting of 300 & 400 Stainless Steel & Carbon Steel, with Welded Cantilever Rack
|
Cecor Chip Hopper Model TP-048-6P
|
Cecor Chip Hopper Model TP-048-6P
|
Cecor Chip Hopper Model TP-048-6P
|
Cecor Chip Hopper Model TP-048-6P
|
Cecor Chip Hopper Model TP-048-6P
|
Crane Hook Pallet Lifting Attachment
|
LOT: (1) Lifting Magnet, Assorted Chains & Eye Bolts
|
8 ft. x 12 ft. (est.) Forkliftable Portable Office
|
LOT: (1) Johnson Bar & Assorted Lifting Straps
|
Toledo 2000 lb. Floor Scale
|
LOT: (1) Banding Cart with Tools & Extra Banding
|
LOT: (3) 3/8 in. Adjustable 2-Leg Chain Slings
|
LOT: (4) 1/4 in. 2-Leg Chain Slings
|
LOT: (1) Foremans Desk, (1) Steel Work Bench
|
Hydraulic Pallet Jack
|
LOT: (2) Hydraulic Pallet Jacks
|
Yale 1/2 Ton Chain Hoist (by Lot #186)
|
LOT: (3) Assorted Fans (in middle room)
|
LOT: (1) 7-Drawer Tool Cabinet (by Lot #168)
|
Climax Key Mill, with Accessories
|
Climax Key Mill, with Accessories
|
Dumore Tool Post Grinder
|
LOT: 30 in. x 60 in. Inspection Plate on Heavy Duty Wood Table
|
LOT: 33 in. x 91 in. T-Slot Machine Table on (2) Steel Horses
|
LOT: 30 in. x 77 in. x 4 in. T-Slot Steel Plate on 4-Wheel Cart
|
LOT: (1) Work Bench with 3 in. Vise & Tooling, (2) Assorted Steel Cabinets
|
LOT: (2) Assorted Wood Top Shop Carts
|
LOT: (2) Assorted Wood Top Shop Carts
|
4-Wheel Wood Top Shop Cart
|
LOT: (3) 2-Wheel Hand Trucks
|
LOT: (2) 34 in. Steel Horses
|
LOT: (3) Air Hose Reels
|
Dayton 1 Ton Chain Hoist, Pendant Control (by Lot #68)
|
Yale 10,000 lb. LP Forklift Model GP-100-SBS-115, S/N P-239469, 421 hours indicated (tank not included - delay removal)
|
Toyota 5000 lb. LP Forklift Model 42-5FG25, S/N 405FG25-40354, 2-Stage Mast, 6944 hours indicated (tank not included - delay removal)
|
Allis Chalmers 9000 lb. LP Forklift Model F80-24PS, S/N 28309000 120 in. Lift Double Mast 54 in. lg. Forks, Solid Tires (No Tank)
|
Yale 3000 lb LP Forklift Model GLC030VAS083P, S/N P-315208, 180 in. Lift Triple Mast 42 in. lg. Forks, Solid Tires (No Tank)
|
MEC 700 lb. Electric Manlift Model 3247ES, S/N 10001834, Non-Marking Tires, 435 hours indicated (machine runs - needs charger)
|
2012 White Land Rover Range Rover HSE 4X4, 84,049 Indicted Miles, VIN SALMF1D4XCA379227
|
1997 Stoughton Van Trailer, VIN 1DW14821WS130522
|
2017 Ford F-350 Stake Bed Truck, VIN 1FDRF3G61HED28331, 107,530 miles indicated (#2)
|
2019 Ford F-250 Lariat Super Duty 4x4 Crew Cab Pick-up Truck, VIN 1FT7W2B62KEG68124, with (3) Tool Boxes, 23,444 miles indicated (#18)
|
2020 Ford F-250 XL 4x4 Extended Cab Pick-up Truck, VIN 1FT7X2B66LEC98858, with (3) Tool Boxes, 2,022 miles indicated (#15)
|
2019 Ford F-150 XL Extended Cab Pick-up Truck, VIN 1FTEX1CB9KKC08566, 50,372 miles indicated (#03)
|
2018 Ford F-150 XL Extended Cab Pick-up Truck, VIN 1FTEX1CP9JKF88535, 32,512 miles indicated (#17)
|
2016 Ford F-250 Lariat Super Duty 4x4 Extended Cab Pick-up Truck, VIN 1FT7X2B64GEB49208, with (3) Tool Boxes, 137,232 miles indicated (#16)
|
2015 Ford F-350 Super Duty Extended Cab Pick-up Truck, VIN 1FT8X3A68FEA38381, with (3) Tool Boxes, 84,588 miles indicated (#14)
|
Spreader Beam 5 in x 10 in I Beam, 144 in. LG (Building 1)
|
Dake 75 Ton Adjustable Bed & Ram H-Frame Hydraulic Shop Press
|
Pro Finish 2-Hole Reach-in Blast Cabinet Model PF2636, S/N 2028, with Dust Collector
|
Clausing 20 in. Variable Speed Drill Press, with Crank Adjustable Work Table
|
Cincinnati 2 HP Double End Grinder/Wire Brush
|
3 in. Belt Sander
|
Dewalt 14 in. Abrasive Chop Saw
|
Dewalt Compound Miter Saw with Bench
|
Bridgeport 1 HP Vertical Mill, S/N BR-38557, 9 in. x 42 in. Power Feed Work Table (no vise)
|
8 in. Machine Vise with Swivel Plate
|
20 in. - 24 in. O.D. Micrometer Set
|
16 in. - 20 in. O.D. Micrometer Set
|
12 in. - 16 in. O.D. Micrometer Set
|
11-Piece O.D. Micrometer Set
|
LOT: (9) Assorted O.D. Micrometers
|
LOT: (5) Assorted I.D. Micrometer Sets
|
Supco Chart Recorder
|
LOT: (2) Depth Micrometer Sets, (1) 12 in. Dial Height Gauge, (1) Digital Protractor, (1) 6 in. Digital Caliper
|
LOT: (2) Assorted Calipers, (1) Microscope, (1) Scale, (1) Simpson Multimeter
|
Dillon 1000 lb. Crane Scale
|
8 in. Double End Pedestal Grinder
|
LOT: (3) Pedestal Fans (in this building)
|
LOT: (6) Hose Reels (in this building)
|
LOT: (1) 2-Door Steel Cabinet, with Contents
|
LOT: (1) 28 in. x 112 in. T-Slot Machine Table on (2) Steel Horses, with 6 in. Machine Vise
|
LOT: (1) 20.5 in. x 72 in. T-Slot Machine Table on (2) Steel Horses
|
LOT: 36 in. x 96 in. Steel Work Bench with 5 in. Vise, (2) Wooden Cabinets
|
4-Wheel Steel Shop Cart
|
LOT: (8) Assorted Steel Horses
|
LOT: (2) Steel Racks with Assorted Balancing Shafts
|
LOT: (1) Reco Model BC Bearing Induction Heater, with Cart
|
Reco Model SC Bearing Induction Heater (no cart)
|
LOT: Assorted Pipe Wrenches, with Table
|
LOT: (1) Work Bench with 5 in. Bench Vise & Assorted Eye Bolts, (1) Table with Assorted Bar Clamps
|
LOT: (1) Wood Top Shop Cart with Bearing Pullers & Tubing Benders
|
LOT: Assorted Sledge Hammers with 4-Wheel Cart
|
(1) Torch Cart with Hose, Torches, Regulators, Gauges & Heating Torches
|
(1) Torch Cart with Hose, Torches, Regulators, Gauges & Heating Torches
|
LOT: (1) SKF Bearing Fitting Tool, (1) Bearing Heater
|
LOT: (3) Assorted Torque Wrenches
|
LOT: (2) 9 in. Heavy Duty Electric Grinders
|
LOT: (2) 4-1/2 in. Angle Grinders, (1) Die Grinder with Extra Abrasives
|
LOT: (4) Assorted Pneumatic Impact Guns - (1) 3/4 in., (3) 1/2 in.
|
LOT: (2) Pneumatic Drills, (5) Assorted Pneumatic Scaling Tools
|
LOT: (1) Contour Probe, (1) Ultraviolet Light Set, Assorted Spot Check Spray
|
LOT: (1) Steel Work Bench with 4 in. Bench Vise, (1) 2-Drawer Cabinet
|
LOT: (1) Laramy Products Welding Torch & Tools for Plastic
|
Thermal Dynamics Thermal Arc 190S DC Inverter Arc Welder
|
Ridgid Electric Threader Model 700-12
|
LOT: (1) Hand Threading Set, (2) Pipe Cutters, Assorted Threading Handles
|
LOT: (2) 3/4 in. Ingersoll Rand Pneumatic Impact Guns
|
Ingersoll Rand 1 in. Pneumatic Impact Gun
|
LOT: (1) Snap-On 1000 lb. Torque Wrench, Assorted Socket Wrenches
|
LOT: Approx. (8) Assorted Pneumatic Tools
|
LOT: (2) Assorted Jig Saws, (1) 7 in. Worm Drive Saw, (1) Right Angle Drill, (1) Heat Gun
|
LOT: Assorted Dewalt Cordless Tools
|
LOT: Assorted Enerpac Pumps & Pistons
|
LOT: (1) Enerpac Power Unit Model PER2032, with Cart & Tools
|
Ridgid Tri-Stand
|
CM 1-1/2 Ton Come-Along
|
LOT: (1) 2-Door Cabinet with Assorted Bearings & Seals, (1) Shelf with Lock Nuts, Washers, Blind Flanges, Assorted Snap Rings, 2-Drawer Cabinet with Assorted O-Rings
|
Ayer 100 Ton Horizontal Wheel Press
|
Lincoln 400 Amp Welder
|
Hot Caustic Cleaning Tank, with Exhaust
|
Safety Kleen Solvent Agitating Parts Washer Model 81
|
LOT: Assorted Wood, 12 ft. Long
|
LOT: All Pax Gasket Cutter Model SM4, with Assorted Gasket Material (on cart & shelf)
|
LOT: 2-Door Steel Cabinet with Assorted Abrasives
|
LOT: Metro Rack with Assorted Plastic Plugs
|
LOT: (4) Rows Multi-Bin Parts Cabinets with Assorted Nuts, Bolts, Washers, Pipe Fittings, etc., (1) Row Small Parts Drawers
|
LOT: (2) 30 Gallon Flammable Storage Cabinets, (1) 2-Door Steel Cabinet with Assorted Packing Material, (1) Wooden Work Bench
|
LOT: (2) 4 ft. Step Ladders, (1) Multi-Function Ladder
|
3/8 in. x 15 ft. Adjustable 2-Leg Chain
|
LOT: Work Bench with 5 in. Bench Vise, Assorted Chain, Eye Bolts, etc.
|
3/4 cu. yd. Self Dumping Hopper
|
Quincy 25 HP Dual 2-Stage Skid Mounted Reciprocating Air Compressor, with Receiver Tank
|
LOT: (2) Large Chain Wrenches, Assorted Pipe Wrenches on Stand
|
1/2 in. x 12 ft. 2-Leg Chain
|
LOT: (4) Assorted Chains, (2) Wire Ropes
|
LOT: (1) Cantilever Rack with Large Quantity of Lifting Straps (no shafts)
|
LOT: (1) Work Bench with Wilton 4-1/2 in. Vise, Assorted Taps & Drills, etc.
|
LOT: (2) Steel Shelves, (1) Wood Shelf with Contents
|
LOT: (1) Steel Work Bench with 4 in. Vise, Assorted Snap-On Tap & Snap Ring Sets
|
LOT: Assorted Open End / Box End Wrenches, Hammer Wrenches, Sockets
|
LOT: Assorted Sunnen Accessories on (1) Steel Shelf
|
LOT: (1) Rack with Assorted Impact & Standard Sockets
|
LOT: (1) Wood Shelf with Assorted Taper Drills & Hold Down Sets
|
Banding Cart with Tools
|
OCE Print/Copy/Scan System Model TDS320
|
LOT: (1) 6-Section Steel Shelf Unit with Rotating Equipment Spare Parts
|
MVE Lab 20 Liquid Nitrogen Tank, 20 Liter Capacity (in Building 1)
|
20 ft. Fiberglass Extension Ladder (in Building 1 by Lot #142)
|
34 in. High Brass Top Pounding Post (in Building 1 by Lot #169)
|
Yale 1 Ton Chain Hoist (in Building 1 by Lot #234)
|
LOT: (3) Adjustable Roller Stands (in Building 1 by Lot #243)
|
Kennedy 8-Drawer Tool Cabinet (in Building 1 by Lot #26)
|
LOT: (1) 36 in. x 96 in. Steel Table (no contents), (3) Sections Adjustable Steel Shelving (no contents) (in Building 1 by Lot #28)
|
LOT: (1) 2-Wheel Barrel Cart, (1) 2-Wheel Hand Truck (in Building 1 by Lot #244)
|
Flowserv Pump Model 8LR-195-17.5, 8 x 12 (approx.)
|
Flowserv Pump Model 8LR-195-17.5, 8 x 12 (approx.)
|
Misc Scrap
|