HPL Stampings, Inc.
Auction starts: September 28, 2023 at
10:00 AM CDT
,
Closing begins: October 17, 2023 at
10:00 AM CDT
Lake Zurich, IL
Items
Milwaukee Heavy Duty Sawzall in Case
|
Milwaukee Heavy Duty Falcon 3/4" Rotary Hammer in Case
|
Milwaukee Heavy Duty Falcon 3/4" Rotary Hammer in Case
|
LOT: (1) Milwaukee Heavy Duty Angle Grinder, (1) Milwaukee Jig Saw
|
LOT: (2) Milwaukee 3/8" Drills, (1) Milwaukee 1/2" Drill
|
LOT: (1) 7-1/4" Skil Saw, (3) Angle Grinders, Dremel
|
LOT: Cart w/Contents of Assorted Wire Brush Attachments, Cutting Blades, Sanding Disc Pads, etc.
|
LOT: Assorted Pneumatic Hand Tools, Grease Gun, Impact Wrenches, Air Hammers, Sanders
|
LOT: Cart w/Contents of 36" Aluminum Pipe Wrench, 10 lb. Sledge Hammer, Aluminum Hammers, Assorted Hammers, Files, Wrenches, etc.
|
LOT: Cart w/Contents of Assorted Pipe Threaders, Dies, 18" Pipe Wrench, Steel Fish Tape, etc.
|
LOT: Cart w/Contents of Large Assortment of Allen Wrenches
|
LOT: Cart w/Contents of 3/4" & 5/8" Allen Wrenches
|
Socket Wrench Set, 3/4" Drive & 7/8" - 2"
|
LOT: Assorted Sockets, Breaker Bar, Socket Extensions, etc.
|
LOT: (3) Webster Hardness Gauges
|
LOT: (8) Hertel HSS Spiral Point Tap 3/4 - 10 H5 3FL Plug, (10) Hertel HSS Spiral Point Tap 3/4 - 10 H3 3 FL Plug, (6) Hertel HSS Spiral Point Tap 5/8 - 11 H3 3 FL Plug (ALL UNUSED)
|
LOT: Large Assortment of End Mills on Cart
|
LOT: Large Assortment of Used & Unused Taps on Cart
|
LOT: Large Assortment of Reemers on Rolling Cart
|
LOT: Assorted Countersinks, Deburring Tooling, Radius Cutters, Endmills, Counterbores on Rolling Cart
|
LOT: Assorted Drill Bits, Reemers, Counterbores, Counter Sinks, Endmills, etc.
|
LOT: Assorted Collets, Cutters, Drills, Taps, etc. on Rolling Cart
|
LOT: Large Assortment of New & Used Drill Bits on Rolling Cart
|
LOT: (3) Huot Drill Index Case w/Large Assortment of New & Used Drill Bits
|
LOT: (6) Assorted Drill Index Cases w/Assorted Drill Bits
|
LOT: (6) Assorted Index Cases w/Assorted Drill Bits, Reemers, Taps, etc.
|
LOT: Bridgeport Model BP13826 Vertical Mill, S/N 13826, 32" x 9" Work Table, 12" Throat w/Bridgeport Vise, Drill Chuck, (9) Assorted R8 Collets
|
LOT: Bridgeport Model 99883 Vertical Mill, S/N BR99883, 42" x 9" T-Slot Table, 11.5" Throat w/Bridgeport Vise, Assorted R8 Collets & Tooling
|
LOT: Bridgeport Vertical Mill, S/N BR118436, 1-1/2 HP, 36" x 9" T-Slot Table w/Bridgeport Vise, 10.5" Throat
|
LOT: Bridgeport Model 28818 Vertical Mill, S/N BR28818, 1 HP, Power Feed, 42" x 9" T-Slot Table, 14" Throat w/Bridgeport Vise w/Super Power Workhorse Max Torque 650 in - lb.
|
LOT: Bridgeport Model 86374 Vertical Mill, S/N BR86374, 1 HP, 32" x 9" T-Slot Table, 15" Throat
|
LOT: Bridgeport Vertical Mill, S/N 21989, 1 HP, 42" x 9" T-Slot Table, 14-1/2" Throat
|
LOT: Ex-Cell-O Vertical Mill w/Mini Wizard 2-Axis Digital Readout, Assorted R8 Collets & Tooling, 36" x 11" Work Table, 14" Throat (VISE NOT INCLUDED)
|
LOT: Assorted Mill Tooling on Side Table, Large Facemill, Boring Bars, Chuck, etc.
|
LOT: (33) Assorted R8 Collets, Mill Tooling
|
Bridgeport Tormax 13-5 Engine Lathe, S/N 002-085106-301, 8" 3-Jaw Chuck, Tail Stock, 1.5" Pipe Diameter (2001)
|
Cincinnati Engine Lathe, 10" 4-Jaw Chuck, Tailstock, 1-3/4" Pipe Diameter
|
11" 4-Jaw Chuck
|
10" 4-Jaw Chuck
|
8" 3-Jaw Chuck
|
LOT: (2) Collet Nose Chucks
|
LOT: (3) Chucks, (5) Live Centers, Lathe Tooling
|
LOT: Rolling Cabinet w/Assorted Lathe Tooling
|
Hardinge DV59 Precision Lathe, 2 HP w/Assorted 5C Collets
|
Universal Hydraulic Machinery 1063 Hydraulic Press, 26" x 25"
|
Hydraulic Press, 12" x 12"
|
LOT: Press Accessories on Shelf
|
Blanchard No. 18 Blanchard Surface Grinder, S/N 9503
|
GarCo Hydrabrasive 1218 Surface Grinder w/18" x 12" Magnetic Chuck
|
Reid 618P Surface Grinder, S/N 13754, 18" x 6", Brown & Sharpe Permanent Magnetic Chuck
|
Surface Grinder w/Brown & Sharpe Permanent Magnetic Chuck, 10" x 5"
|
Surface Grinder w/Walker Cermax Permanent Magnetic Chuck, 12" x 6"
|
Challenger 28960 Surface Grinder w/Walker Cermax Permanent Magnetic Chuck, 12" x 6" Electro-Matic Demagnetizer
|
GarCo Collection System
|
Torit Model 75 Collection Unit, 1 HP
|
LOT: Large Assortment of Surface Grinding Wheels on Wall
|
LOT: Barkling OOS Gas Oven, S/N 3976, Johnson Gas Appl. Co. No. 108 Hot Plate, Quench Station
|
Do-All Model 3012-U Vertical Band Saw, S/N 147-681092 w/Do-All Model 12A Welder w/Solder/Etcher/Demagnetizer, 24" x 24" Work Table, 31" Throat
|
LOT: Grob NS18 Vertical Band Saw, S/N 7638 w/Grob RW-B Single Phase A.C. Welder, w/Dayton 4TJ96 Blade Welder, 24" x 24" Work Table, 18" Throat
|
Spartan SW1118M Horizontal Band Saw, S/N SW1118M10021, 19" Work Space
|
Jet Com-12 Chop Saw, 2 HP (MOUNTED TO TABLE & HARDWIRED)
|
Moore Precision Tools 1/2 HP Boring Jig, 16" x 10" Work Table, 9" Throat
|
Rockwell Delta 1 HP Drill Press, S/N 1422344 w/Procunier 12006 Series Tapping Head, 18" x 15.5" Work Table, 10" Throat
|
Rockwell Delta 17-600 Drill Press, S/N 1365917, 3/4 HP w/Procunier 12006 Series Tapping Head, 17" x 12.5" Work Table, 8.5" Throat
|
Powermatic Model 1150 Drill Press, S/N 5-5682-1, 1-1/2 HP, 30" x 20" Work Table, 7.5" Throat
|
Delta Rockwell Model 15-017 Drill Press, S/N 1479459, 1/2 HP, 18" x 12" Work Table, 7.5" Throat
|
Delta Rockwell Drill Press, S/N 11D00075, 1-1/2 HP, 18" x 15" Work Table, 10" Throat
|
Delta Rockwell Drill Press w/Tapping Head, S/N 102-9688, 3/4 HP, 17" x 12" Work Table, 8" Throat
|
Delta Rockwell Drill Press, S/N 116-1957, 1-1/2 HP, 17" x 12.5" Work Table, 8.5" Throat
|
Delta Rockwell Drill, Model 15-017, S/N 1479461, 1/2 HP, 18" x 12" Work Table, 7.5" Throat
|
Delta Rockwell Drill Press, 16" x 11" Work Table, 7" Throat
|
Delta Rockwell 15-017 Drill Press, S/N 1479460, 1/2 HP, 18" x 12" Work Table, 8" Throat
|
Delta Rockwell Drill Press 17" x 12.5" Work Table, 8.5" Throat
|
Delta Rockwell 15-650 Drill Press, S/N 1391428, 3/4 HP
|
Snow Model 1-UTB Tapping Machine, S/N 33922, 18" x 10.5" Work Table , 8" Throat
|
Tapping Machine 15" x 12" Work Table, 7-1/2" Throat
|
Tapping Machine (Condition Unknown)
|
Procunier Series 29080 Model 3 Tapping Machine, S/N B7915, Tapping Machine w/Procunier Series 38005 Model MO Multiple Tapping Attachment, S/N 2866 (REBUILT IN THE LAST YEAR)
|
Procunier Series 29080 Model 3 Tapping Machine, S/N B7916 Tapping Machine w/Procunier Series 38005 Model MO Multiple Tapping Attachment, S/N 2865 (REBUILT IN THE LAST YEAR)
|
Procunier Series 29080 Model 3 Tapping Machine, S/N B8419 Tapping Machine w/Procunier Series 38005 Model MO Multiple Tapping Attachment, S/N 3467 (REBUILT IN THE LAST YEAR)
|
LOT: Cart w/Procunier Tapping Machine Accessories, Collets, Spindles, etc.
|
LSMW ACCU-Tapper, 1/3 HP
|
Cincinnati Double Edge Grinder Model 105, 1/2 HP
|
Baldor 3/4 HP Double Edge Grinder
|
Double Ended Grinder Pedestal Mounted
|
Delta Rockwell 82-910 Disc Sander, 3/4 HP
|
HC Haskins Tool Post Grinder, 1/2 HP
|
LOT: (1) Dumore 1/2 HP Tool Post Grinder, (1) Dumore 3/4 HP Tool Post Grinder
|
LOT: (2) Dumore 1/4 HP Tool Post Grinders, (1) Dumore 1/5 HP Tool Post Grinder
|
LOT: (1) Suburban Tool Magnetic Chuck, (1) Magnetic Vise
|
Magnetic Chuck
|
LOT: (2) V-Block Grinding Fixtures
|
LOT: (1) Radius and Angle Dresser, (2) Radius Dressers
|
LOT: (2) 5C Collet Indexers
|
5-1/2" Machine Vise on Swivel Base
|
LOT: (1) 6" Machine Vise, (1) 5-1/4" Machine Vise
|
LOT: (2) Swivel Bases
|
LOT: (3) Assorted Vises
|
LOT: (3) Assorted Vises
|
LOT: (2) 3-1/2" Columbian Vises
|
LOT: (1) 4" Simplex Vise, (1) 3-1/2" Columbian Vise (BOLTED TO TABLE)
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise (NO CONTENTS)
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise (NO CONTENTS)
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise (NO CONTENTS)
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise
|
60" X 30" Work Table w/3-1/2" Wilton Torpedo Vise (NO CONTENTS)
|
LOT: (1) 60" x 30" Work Table w/3-1/2" Wilton Torpedo Vise, (1) 60" x 30" Work Table (NO CONTENTS)
|
LOT: (1) 60" x 30" Work Table w/3-1/2" Columbian Vise, (1) 60" x 30" w/Assorted Punches & Stamps
|
Tru-Point TGD195 Precision Drill Grinder/Sharpener
|
Fadal VMC4020 Vertical Machining Center, Model 906-1, S/N 9508481, (1995)
|
Fadal VMC4020 Vertical Machining Center, Model 906-1, S/N 9501897, (1995)
|
Speedaire 4B233E Vertical Air Compressor, S/N L712812004-00042, HP: SPL
|
LOT: (40) Assorted Cat 40 Collet Tool Holders on Cart, Extra Cart
|
LOT: (24) Assorted Cat 40 Tooling & Tool Holders, Assorted Collets on TruPrecision CNC Organizer
|
LOT: (11) Assorted Cat 40 Tooling & Tool Holders, Assorted Collets
|
Charmilles Technologies Robofil 510P Wire EDM, S/N 560040, (1998) w/Advantage MG-2APT-CH Chiller, S/N 189905, (11/16/2022)
|
Charmilles Technologies Robofil 290 Wire EDM, S/N 335420 (1998), w/Advantage MG-2APT-CH Chiller, S/N 189906 (11/16/2022)
|
Trumpf TruBend 5085 CNC Brake Press, S/N B0502A0644, (2012)
|
LOT: Assorted Press Brake Tooling for Trumpf CNC Press Brake
|
EV-W6 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W50 Trumpf Laser du Press Brake Die 500mm
|
EV-W24 Trumpf Laser du Press Brake Dies (2) 500mm
|
EV-W50 Trumpf Laser du Press Brake Dies 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 100mm
|
EV-W50 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV003-W10 Trumpf Laser du Press Brake Dies (2)25mm, 30mm,35mm,40mm,45mm,50mm,(3) 100mm
|
EV-W50 Trumpf Laser du Press Brake Die 500mm
|
EV004-W12 Trumpf Laser du Press Brake Die 500mm
|
EV003-W10 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W30 Trumpf Laser du Press Brake Dies 25mm, 30mm, 40mm, 45mm, 50mm, (3) 100mm
|
EV-W10 Trumpf Laser du Press Brake Die 500mm
|
EV-W30 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W30 Trumpf Laser du Press Brake Die 500mm
|
EV-W24 Trumpf Laser du Press Brake Dies 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, (3) 100mm
|
Die 500mm
|
EV003-W10 Trumpf Laser du Press Brake Die 500mm
|
EV002-W8 Trumpf Laser du Press Brake Dies 200mm,300mm
|
EV002-W8 Trumpf Laser du Press Brake Dies (2)25mm, 35mm, 40mm, 45mm, 50mm, (3)100mm
|
EV001-W6 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV001-W6 Trumpf Laser du Press Brake Dies (2) 25mm, (2)30mm, 35mm, 40mm,45mm,50mm,100mm
|
EV001-W6 Trumpf Laser du Press Brake Die 500mm
|
EV001-W6 Trumpf Laser du Press Brake Die 500mm
|
EV004-W12 Trumpf Laser du Press Brake Dies (2) 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, (3) 100mm
|
EV002-W8 Trumpf Laser du Press Brake Die 500mm
|
EV002-W8 Trumpf Laser du Press Brake Die 500mm
|
EV003-W10 Trumpf Laser du Press Brake Die 500mm
|
EV005-W16 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W6 Trumpf Laser du Press Brake Dies (2) 25mm, 30mm, 35mm, 40mm,45mm,50mm, (3) 100mm
|
EV-W16 Trumpf Laser du Press Brake Die 500mm
|
EV005-W16 Trumpf Laser du Press Brake Dies 25mm, 30mm, 40mm, 45mm, 50mm, (3) 100mm
|
EV00-W16 Trumpf Laser du Press Brake Die 500mm
|
OW 202/K Trumpf Laser du Press Brake Dies 200mm, 300mm
|
OW 202/K Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV004-W12 Trumpf Laser du Press Brake Die 500mm
|
EV004-W12 Trumpf Laser du Press Brake Die 500mm
|
OW 202/K Trumpf Laser du Press Brake Die 500mm
|
OW 202/K Trumpf Laser du Press Brake Dies (2) 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 100mm, 100Rmm, 100Lmm
|
OW 201/K Trumpf Laser du Press Brake Dies (2) 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 100mm, 100Rmm, 100Lmm
|
OW 201/K Trumpf Laser du Press Brake Die 500mm
|
EV-W6 Trumpf Laser du Press Brake Die 500mm
|
EV-W6 Trumpf Laser du Press Brake Die 500mm
|
EV-W8 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W8 Trumpf Laser du Press Brake Die 500mm
|
EV-W8 Trumpf Laser du Press Brake Dies (2) 25mm, 30mm, 35mm, 40mm, 50mm, (3) 100mm
|
EV-W12 Trumpf Laser du Press Brake Die 500mm
|
EV-W12 Trumpf Laser du Press Brake Die 500mm
|
EV-W12 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W12 Trumpf Laser du Press Brake Dies (2)25mm, 30mm, 35mm, 40mm, 45mm, 50mm, (3) 100mm
|
EV-W16 Trumpf Laser du Press Brake Dies (2)25mm, 30mm, 35mm, 40mm, 45mm, 50mm, (3) 100mm
|
EV-W16 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV-W16 Trumpf Laser du Press Brake Die 500mm
|
EV-W16 Trumpf Laser du Press Brake Die 500mm
|
OW 202/K Trumpf Laser du Press Brake Die 500mm
|
EV-W10 Trumpf Laser du Press Brake Die 500mm
|
EV-W24 Trumpf Laser du Press Brake Die 500mm
|
EV-W24 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV007-W24 Trumpf Laser du Press Brake Die 200mm
|
EV007-W24 Trumpf Laser du Press Brake Die 500mm
|
EV007-W24 Trumpf Laser du Press Brake Die 500mm
|
EV-W10 Trumpf Laser du Press Brake Dies 200mm, 300mm
|
EV007-W24 Trumpf Laser du Press Brake Dies (2)25mm, 30mm, 35mm, 45mm, 50mm, (3)100mm
|
EV-W10 Trumpf Laser du Press Brake Die 500mm
|
Dreis & Krump Mfg. Co. Model 265 Brake Press, 25-Tons, S/N L13074, 6' Length
|
Di-Acro Hydra-Power Press Brake No. 16-36 w/Stroke Adjustment, S/N JA1109, 3' Length
|
Di-Acro Hydra-Power Press Brake No. 16-36 w/Stroke Adjustment, S/N JA1006, 3' Length
|
LOT: (1) Section 8' x 8' x 33" Tear Drop Pallet Racking w/Large Assortment of Press Brake Tooling, Punches, Dies
|
Trumpf Tru Laser 1030 Laser Cutting Machine w/Trumpf Laser Tru Disk 2001 Power Source
|
Lodge & Shipley Hydro Hold Sof-Loc Model 0412-SL 12' Metal Shear, S/N 48927
|
Verson 215-Ton Straight Press No. 7B36-SP, S/N 10575, 36" x 36" Bolster Plate, (A2)
|
Verson 15-Ton OBI Press w/Cushion Model 150-0BG, S/N 27114 w/Triad TR-18-2F-20 Light Curtain, 50" x 30" Bolster Plate, (A15)
|
Bliss 110-Ton OBI Press w/Cushion, S/N H69302 w/Triad TR-18-2F-20 Light Curtain, 42" x 30" Bolster Plate, (A16)
|
The Cleveland Punch & Die Co. 110-Ton OBI Press w/Cushion, S/N 10518, 38" x 26" Bolster Plate (New Rebuilt Clutch Within 6 Months, Approx. 25k Repair), (A3)
|
The Minster Machine Co. 75-Ton Press w/Cushion, 27" x 26" Bolster Plate, (A14)
|
Johnson Machine & Press Corp. 75-Ton Press (no Cushion), 38" x 35" Bolster Plate, (B1)
|
Bliss 60-Ton OBI Press w/Cushion Model C-60, 36" x 32" Bolster Plate, (A4)
|
Bliss 60-Ton OBI Press w/Cushion Model C-60, 36" x 32" Bolster Plate, (A5)
|
Bliss C-60, 60-Ton OBI Press w/Cushion, S/N H65546, 36" x 32" Bolster Plate, (A13)
|
Bliss C-60, 60-Ton OBI Press w/Cushion, S/N H69009, w/Triad TR-F8-2F-20 Light Curtain, 36" x 32" Bolster Plate, (A12)
|
Bliss C-60, 60-Ton OBI Press w/Cushion, S/N H69008, 36" x 32" Bolster, (B2)
|
Bliss C-60, 60-Ton OBI Press w/Cushion, S/N H66699, 36" x 32" Bolster Plate, (B3)
|
L & J 60-Ton Press w/Cushion, 35" x 30" Bolster Plate, (B4)
|
L & J Variable Speed Model No. 5, 49-Ton OBI Press w/Cushion, S/N 51849, 35" x 30" Bolster Plate, (A11)
|
L & J 49-Ton OBI Press w/Cushion, 35" x 30" Bolster Plate, (A10)
|
L & J 49-Ton OBI Press Model No. 50, S/N 52028A, w/Cushion, 27" x 16" Bolster Plate, (A6)
|
L & J 50-Ton OBI Press Model No. 5, S/N 51921, w/Cushion, 32" x 20" Bolster Plate
|
L & J 49-Ton OBI Press Model No. 50, S/N 52029A, w/Cushion, 35" x 30" Bolster Plate, (B10)
|
L & J 49-Ton OBI Press No. 5, S/N 51878, w/Cushion, 35" x 30" Bolster Plate, (C2)
|
Bliss 35-Ton OBI Press w/Cushion, S/N H51498, 32" x 26" Bolster Plate, (A9)
|
Bliss C-35, 35-Ton OBI Press w/Cushion, (A8)
|
Federal Press Co. 27-Ton OBI Press w/Cushion, 32" x 26" Bolster Plate, (B9)
|
L & J Press No. 27, 27-Ton OBI Press w/Cushion, S/N 35531, 24" x 22" Bolster Plate, (B9A)
|
L & J Press No. 27, 27-Ton OBI Press Model No. 3-1/2, S/N 35180, 22" x 14" Bolster Plate (NO CUSHION), (B8)
|
L & J Press No. 3-1/2, 27-Ton OBI Press w/Cushion, S/N 35371, 24" x 22" Bolster Plate (CONDITION UNKNOWN)
|
L & J Press No. 27, 27-Ton OBI Press w/Cushion, S/N 35470, 24" x 22" Bolster Plate, (B6)
|
L & J Press No. 3-1/2, 27-Ton OBI Press, S/N 35175, 24" x 22" Bolster Plate (NO CUSHION), (C4A)
|
L & J Press No. 3-1/2, 27-Ton OBI Press, 24" x 22" Bolster Plate, (C5)
|
L & J Press No. 27, 27-Ton OBI Press w/Cushion, S/N 35530, 24" x 22" Bolster Plate, (C3)
|
L & J Press No. 27, 27-Ton OBI Press w/Cushion, S/N 35418, 24" x 22" Bolster Plate, (CA)
|
L & J Press No. 2, 18-Ton OBI Press, S/N 22749, 24" x 22" Bolster Plate, (NO CUSHION), (C13)
|
L & J Press No. 18, 18-Ton OBI Press, S/N 00622, 24" x 22" Bolster Plate (NO CUSHION), (C11)
|
L & J Press No. 18, 18-Ton OBI Press, S/N 22924, 24" x 22" Bolster Plate (NO CUSHION), (C10)
|
L & J Press No. 18, 18-Ton OBI Press, S/N 22923, 24" x 22" Bolster Plate (NO CUSHION), (C9)
|
L & J Press No. 18, 18-Ton OBI Press, S/N 22921, 24" x 22" (NO BOLSTER PLATE OR CUSHION), (C8)
|
Bliss 18-Ton OBI Press, (no cushion), 24" x 22" Bolster Plate, (C6)
|
L & J Press No. 2, 18-Ton OBI Press, (no cushion), 24" x 22" Bolster Plate, (C15)
|
L & J Press No. 18, 18-Ton OBI Press, (no cushion), S/N 22839, 24" x 22" Bolster Plate, (D2)
|
L & J Press No. 2, 18-Ton OBI Press, (no cushion), 24" X 22" Bolster Plate, (D5)
|
L & J Press No. 2, 18-Ton OBI Press, (no cushion)24" X 22" Bolster Plate, (D6)
|
L & J Press No. 18, 18-Ton OBI Press, (no cushion), S/N 22826, 24" x 22" Bolster Plate, (D7)
|
L & J Press No. 18, 18-Ton OBI Press, (no cushion), S/N 22862, 24" x 22" Bolster Plate, (D8)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22897, 24" x 22" Bolster Plate, (F5)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22902, 24" x 22" Bolster Plate, (F4)
|
L & J No. 18, 18-Ton OBI Press w/Cushion, S/N 22929, 24" x 22" Bolster Plate, (F3)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, 24" x 22" Bolster Plate, (F2)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, S/N 22633, 24" x 22" Bolster Plate, (F1)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22925, 24" x 22" Bolster Plate, (G1)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22861, 24" x 22" Bolster Plate, (G1)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22926, 24" x 22" Bolster Plate, (G3)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, S/N 22634, 24" x 22" Bolster Plate, (G4)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, 24" x 22" Bolster Plate (CONDITION UNKNOWN, MISSING COVER)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, 24" x 22" Bolster Plate, (G6)
|
L & J Press No. 18, 18-Ton OBI Press (no cushion), S/N 22928, 24" x 22" Bolster Plate, (G7)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22896, 24" x 22" Bolster Plate, (G8)
|
L & J Press No. 2, 18-Ton OBI Press w/Cushion, S/N 22615, 24" x 22" Bolster Plate, (G9)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22825, 24" x 22" Bolster Plate, (G10)
|
L & J Press No. 18, 18-Ton OBI Press w/Cushion, S/N 22927, 24" x 22" Bolster Plate, (G11)
|
L & J Press 18-Ton OBI Press (no cushion), 21" x 18" Bolster Plate, (H1)
|
L & J Press No. 3, 18-Ton OBI Press (no cushion), 24" x 22" Bolster Plate, (H2)
|
L & J Press No. 3, 22-Ton OBI Press w/Cushion, S/N 33326, 24" x 22" Bolster Plate, (H3)
|
L & J Press No. 18, 18-Ton OBI Press (no cushion), S/N 122863, 24" x 22" Bolster Plate, (H7)
|
Federal No. 3, 32-Ton OBI Press (no cushion), S/N 3-2156, 24" x 22" Bolster Plate, (H8)
|
L & J Press No. 3, 32-Ton(est.) OBI Press w/Cushion, 24" x 22" Bolster Plate, (H9)
|
LOT: (12) Pallets Consisting of Spare Press Parts, Assorted Feeders, Tooling Units, etc.
|
LOT: (2) Carts w/Assorted T-Bolts, Nuts, Washers, Tie-Downs, etc.
|
LOT: (2) Carts w/Assorted T-Bolts, Nuts, Washers, Tie-Downs, etc.
|
LOT: (3) Carts w/Assorted T-Bolts, Nuts, Washers, Tie-Downs, etc.
|
LOT: (1) Cart, (1) Pallet of Large Assortment T-Bolts, Nuts, Washers, Tie-Downs, Misc. Cushion Blocks, Knockout Bars, etc.
|
LOT: 6-Tier Rack w/Assorted Various Forming Rails for Punch Press
|
LOT: 6-Tier Rack w/Various Units & Holders for Forming Rails
|
LOT: 6-Tier Rack w/Assorted V Punches & V Forming Dies, Punch Brake & Punch Presses
|
LOT: 6-Tier Rack w/Assorted V Punches & V Forming Dies
|
LOT: 6-Tier Rack w/Stencil Holders & Misc. Tool Holders
|
LOT: 6-Tier Rack w/Punch Press Tool Holders
|
LOT: 6-Tier Rack w/Punch Press Tool Holders
|
LOT: 6-Tier Rack w/Special Job Tool Holders for Punch Press & Spacer Plates
|
LOT: 6-Tier Rack w/Tool Holders & Spacer Plates
|
LOT: Large Assortment of Punch Brake Wrenches
|
LOT: Large Assortment of Punch Brake Wrenches
|
Cooper Weymouth Small Part Straightener, S/N V817493, (C12)
|
Cooper Weymouth Small Part Straightener, S/N V6171009, (C13)
|
Green Part Straighteners
|
Yellow Part Straighteners
|
Brown & Sharpe Micro-Nite 600 Height Gage
|
Brown & Sharpe Micro-Nite Height Gage
|
Brown & Sharpe Micro-Nite Height Gage (In Machine Shop)
|
Wilson Rockwell Hardness Tester on Table
|
Imada LV-220-C Tension and Compression Force Gage, w/Accessories, S/N 167323
|
LOT: (2) Height Gages
|
LOT: (2) Wiegel Tool Works Height Gages
|
LOT: (3) Assorted Mitutoyo Dial Height Gages
|
LOT: (2) Starrett Height Gages, (2) Brown & Sharpe Height Gages
|
LOT: (5) Brown & Sharpe Height Gages
|
LOT: Assorted Magnetic Bases, V-Blocks
|
35" Vernier Caliper in Case
|
Starrett 26" Vernier Caliper in Case
|
LOT: (1) Center Mike, 13", (1) Andrew Engineering Co. 26" Center Hold Micrometers
|
LOT: (1) Brown & Sharpe Digital Caliper, (3) Brown & Sharpe Dial Indicators Calipers
|
LOT: (1) Starrett Precision Level, (1) Helios Level
|
LOT: (4) Assorted Height Gage Calibration Blocks
|
LOT: (1) Ekonogage Model 13 Pin Gage Library, (1) Ekonogage Model A Pin Gage Library
|
Ekonogage Model A Pin Gage Library
|
LOT: (2) Pin Gage Sets
|
LOT: (2) Pin Gage Sets
|
LOT: (4) Assorted Pin Gage Sets
|
LOT: (4) Pin Gage Libraries on (2) Side Tables (Located in Machine Shop)
|
Starrett Outside Micrometer Set
|
LOT: (5) Assorted Micrometers, Starrett Indicator
|
LOT: Center-Mike Hole Location Gage, (2) Starrett, (1) Lufkin Inside Micrometer
|
LOT: Assorted Outside Micrometers, Inside Micrometer, Threaded No-Go Gages
|
LOT: (6) Assorted Gage Block Sets
|
Tensitron Trigger Tension Meter Model TR-4000
|
LOT: (3) Barcor Countersink Gages
|
LOT: (3) Chamfer Gages, (2) Mitutoyo Dial Indicators
|
LOT: (7) Assorted Bases
|
LOT: (5) Assorted Angle Blocks
|
LOT: Assorted Angle Blocks (Located in Machine Shop)
|
Veeco Dermitron D-3000 Coating Thickness Gage
|
LOT: Assorted PM Gages, Deburring Brushes
|
Top Opening, 3-Drawer Wooden Machinist Box
|
36" x 24" x 6" Granite Surface Plate on Stand
|
36" x 24" x 6" Granite Surface Plate on Stand
|
36" x 24" x 4" Granite Surface Block
|
LOT: Granite Surface Blocks on Stand: (1) 36" x 24" x 4-1/2", (1) 24" x 18" x 4", (1) 12" x 12" x 3-1/2", (1) 12" x 8" x 2" (LOCATED IN MACHINE SHOP)
|
Miller Dialarc HF Constant Current AC/DC ARC Welding Power Source, S/N JF955437
|
Airco Model CV-450 Aircomatic Welding Machine w/Mig Welding Wire
|
Alphil Spot Welder, S/N 3201
|
Lincoln Welder
|
Torch Cart w/(2) Cutting Torches, (2) Regulators, Hose
|
57" x 37" Steel Fabrication Table, 1" Thick Steel Top
|
LOT: (1) Palmgren Vise, (1) Famco Arbor Press (NO HANDLE)
|
LOT: (2) Metal Tables w/Welding Accessories, Welding Clamps, Welding Masks, Face Shield, Assorted Welding Wire & Electrodes, LC-40 Cable Connector, etc.
|
Long 4-Prong Power Cord, 30A, 600V
|
LOT: 3-Tier Rubbermaid Shop Cart w/Large Quantity of Assorted Kant Twist Clamps
|
LOT: Metal Shop Cart w/Assorted Heavy Duty F-Clamps
|
LOT: Metal Shop Cart w/Assorted Bar Clamps
|
LOT: Metal Shop Cart w/Assorted C-Clamps, Extended Reach C-Clamps, Brute Force C-Clamps, etc.
|
LOT: Metal Shop Cart w/Assorted Clamps, Pony Clamps, Deep Reach C-Clamps, C-Clamps, etc.
|
Timesaver Model 137-1HDMW Belt Sander, S/N 19237Y, 38" Belt Capability
|
LOT: Assorted Sanding Belts for 38" Sander
|
Timesavers Model 960-1MW 9" Belt Sander, S/N 20622S
|
Timesavers Mini-Belt 948 9" Belt Sander, S/N 6203-5
|
Timesavers Mini-Belt 948 9" Belt Sander, S/N 5991-23
|
LOT: (9) Unused Rolls of Assorted 9 x 48, 60 Grit Coated Abrasive Sanding Belts, (1) 9 x 60, 60 Grit Coated Abrasive Sanding Belts, (2) 9 x 60, 120 Grit Coated Abrasive Sanding Belts
|
LOT: Contents of Cabinet: Assorted 60 & 120 Grit Sanding Belts, Abrasive Mops, etc.
|
The United States Electrical Tool Co. Model 501 Double Edge Grinder, 1 HP
|
3" Belt Sander
|
2-1/4" Belt Sander w/Baldor 1.5 HP Motor
|
6" Belt & Disc Sander, 3/4 HP
|
60" Dia. Vibratory Bowl w/2-Step Platform
|
42" Dia. Vibratory Bowl
|
32" Dia. Vibratory Bowl
|
Vibradyn Vibratory Bowl w/Vibradyn C-1000-4 Control
|
Unopened Barrel of Vibra-Flo Cleaning Compound
|
LOT: (2) Pallets w/Unused Boxes of Assorted Vibratory Ceramic Stones, (1) Pallet w/Ceramic Stones, (1) Pallet Corn Cob Particles
|
Ultra-Vibe 10 Thumler's Tumbler on Stand w/Tub of Ceramic Pallets
|
Oarlike Concrete Mixer Model PCM420
|
LOT: Concrete Mixer, Sifter Screens, Buckets
|
2005 Kenworth T300 Box Truck, VIN 2NHKMHD7H25M079810, Caterpillar C7 Engine, Eaton 6-Speed Manual Transmission, 2,000 Lb. Cap. Lift Gate, GVWR: 29,000 lbs., 6956 Indicated Miles
|
2014 53' Hyundai Insulated Containers with Carrier X7300 Refrigeration Units and 130-Gallon Diesel Tanks, 13,892 Hours indicated on the Carrier, VIN PAY91380404 TXU560213. Unit will get pre-trip inspection by Depot in Chicago before release.Â
Hyundai Insulated Container Drawings |
2014 53' Hyundai Insulated Containers with Carrier X7300 Refrigeration Units and 130 Gallon Diesel Tanks, 14,530 Hours Indicated on the Carrier, VIN PAY91380400 TXU560202. Unit will get pre-trip inspection by Depot in Chicago before release.
Hyundai Insulated Container Drawings |
2018 Ford Transit Van, VIN 1FTYR1CM3JKA68019, 145,325 Indicated Miles
|
Lennox LF24-250A-5 Ceiling Hung Gas Furnace, 250,000 BTU (NEVER USED - TESTED FOR 10 HOURS)
|
Lennox LF24-250A-5 Ceiling Hung Gas Furnace, 250,000 BTU (NEVER USED - TESTED FOR 10 HOURS)
|
Yale 5,000 Lb. Cap. Forklift Model ERC050RGN36TE082, S/N E108V13647X, Barrel Lifting Attachment, 48" Forks, 3 Mast, Quantum Electric Battery Charger, 11,434 Indicated Hours
|
Yale 5,000 Lb. Cap. Forklift Model ERC050RFN36SE084, S/N K603207, 48" Forks, 3 Mast, Quantum Q4-24/36-150-208 Electric Battery Charger, 20,521 Indicated Hours
|
Crusader 12RR-240-1 Electric Battery Charger, S/N H4-3082
|
Tennant T3 Echo H20 Walk Behind Floor Scrubber, 1575 Indicated Hours
|
Nobles Speed Scrub Walk Behind Floor Scrubber, 997 Indicated Hours
|
Crown Electric Stacker Model 30WTL-S, 3,000 lb. Cap, 130" Lifting Height
|
Grand Touring Snowmobile Ski-Doo Bombardier, 4698 Indicated Miles
|
Grand Touring Snowmobile Ski-Doo Bombardier, 4415 Indicated Miles
|
2001 Matrix Sno-Pro Snow Mobile Trailer Model 8 x 10 GD, VIN 4PVGD10172E013017, 2,200 lb. Cap.
|
Wesco Jib Rig Extending Forklift Boom, 2-Ton Cap.
|
Rolling/Forkliftable Safety Work Platform
|
Forklift Barrel Attachment
|
Forklift Broom Attachment
|
Roura Hopper Rolling Self Dumping Hopper
|
Self Dumping Hopper
|
Self Dumping Hopper
|
Self Dumping Hopper (Off Track)
|
Self Dumping Hopper
|
Self Dumping Hopper
|
Self Dumping Hopper
|
Mansaver G0-307 Sheet Lifter, 6,000 lb. Cap.
|
Rowe Coil Cradle
|
Rowe Easy Load Coil Cradle
|
LOT: (2) Uncoilers, (1) Straightener
|
Economy Hi-Jacker 300 Lb. Cap. Manual Hand Crank Telescoping Work Platform, 15' Max Height, 19' w/Foot Extension
|
Manual Hand Crank Platform Stacker
|
Regal MV60 750 Lb. Manual Crank Platform Stacker
|
Manual Hand Crank Platform Stacker
|
Economy 2000 Lb. Cap. Adjustable Die Cart
|
LOT: (2) Adjustable Die Carts
|
LOT: (5) Assorted Hand Truck Dollies
|
Steel Banding Cart w/Banding Tools
|
LOT: 1000 Lb. Cap. Barrel Cradle, Barrel Dolly
|
74" x 30" Material Cart
|
74" x 30" Material Cart
|
LOT: (1) 8-Step Rolling Safety Stairs, (1) 3-Step Rolling Safety Stairs
|
LOT: Vintage Material Dolly, (2) Wheel Barrows
|
LOT: Pallet Jack w/Assorted Lifting Straps, Slings, etc.
|
LOT: (2) Pallet Jacks
|
LOT: (3) Pallet Jacks
|
LOT: (11) Material Carts
|
LOT: (22) Assorted Material Carts w/Handle
|
LOT: (23) Assorted Material Carts w/Handle
|
LOT: (13) Assorted Material Carts w/Handle
|
LOT: (15) Assorted Material Carts w/Handle
|
LOT: (4) Sections of 15' x 9' Single Sided Heavy Duty Cantilever Racking, 48" Arms, (MC81-89, MC71-79, MC61-69, MC51-59) (NO CONTENTS) (DELAYED REMOVAL, CONTACT SITE MANAGER)
|
LOT: (5) 15' x 7" Single Sided Heavy Duty Cantilever Rack, 48" Arms, (MC41-49, MC31-39, MC21-29, MC11-19, MC1-9) (NO CONTENTS) (DELAYED REMOVAL, CONTACT SITE MANAGER)
|
LOT: (3) Wire Crates
|
LOT: (4) Stackable Wire Crates, (3) Metal Stackable Crates
|
LOT: Yard Machine 5 HP Snowblower, Craftsman 5 HP Snowblower
|
Rolling Toledo Scale
|
LOT: (6) Sections of Pallet Racking w/Contents
|
LOT: (4) Sections 14' x 10' x 36" Tear Drop Pallet Racking
|
LOT: (4) Sections 14' x 10' x 36" Tear Drop Pallet Racking
|
LOT: (3) Sections 14' x 10' x 36" Tear Drop Pallet Racking
|
LOT: (2) Sections 7' x 13" x 48" Tear Drop Pallet Racking, (3) Sections 10' x 10' x 30" Pallet Racking, (4) Sections 8' x 8' x 30" Tear Drop Pallet Racking
|
LOT: (1) Section 14' x 10' x 30" Pallet Racking, (3) Sections 8' x 10' x 30" Pallet Racking, (3) Sections 8' x 8' x 30" Tear Drop Pallet Racking (NO CONTENTS)
|
LOT: (3) Sections 14' x 10' x 30" Pallet Racking, (1) Section 14' x 11' x 42" Pallet Racking
|
LOT: (3) Sections 10' x 10' x 30" Pallet Racking
|
LOT: (3) Sections 10' x 10' x 30" Pallet Racking
|
LOT: (1) Section 10' x 10' x 30" Pallet Racking, (3) Sections 8' x 10' x 30" Pallet Racking
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
LOT: (50) Sections of 8' Vertical Racking & Hardware, Shelves may be connected horizonally for any length desired (BROKEN DOWN, SHRINKWRAPPED & PALLATIZED)
|
Mezzanine (NO CONTENTS) (DELAYED REMOVAL, CONTACT SITE MANAGER)
|
LOT: Contents of Upper Mezzanine (MUST TAKE EVERYTHING)
|
LOT: Contents of Maint/Repair Shop: Assorted Cabinets w/Contents, Work Tables, Filing Cabinets, (1) Pallet Rack w/Contents (MUST TAKE EVERYTHING)
|
LOT: Lista 9-Drawer Cabinet, (1) 20-Drawer Hardware Cabinet w/Assorted Bolts, Dowel Pins, Springs, Hardware, etc.
|
LOT: 14-Drawer Tooling Cabinet w/Large Assortment of Punches, etc.
|
LOT: 14-Drawer Tooling Cabinet w/Large Assortment of Punches, etc.
|
LOT: 13-Drawer Tool Cabinet w/Assorted Punches
|
LOT: 10-Drawer Tool Cabinet w/Assorted Punches
|
LOT: (6) Assorted Shelves of Cold Rolled Material Stock
|
LOT: Stackable Material Racks w/Assorted, Material Stock
|
LOT: (4) Shelves w/Assorted Cold Rolled Material Stock
|
New Die Set
|
LOT: 60" x 30" Table w/3-1/2" Columbia Vise, Pedestal Fan, (3) Jack Stands (LOCATED IN MACHINE SHOP)
|
LOT: (2) 60" x 30" Tables, Shelf w/Tie Down Accessories & Toolchanger (NO VISE)
|
LOT: (2) 60" x 30" Maple Work Benches
|
Watson 11-Drawer Tool Cabinet
|
LOT: (37) Assorted Shelves of Material Stock, etc.
|
LOT: (3) Machine Side Tables
|
LOT: 72" x 30" Maple Top Work Bench, 60" x 30" Work Bench w/3-1/2" Columbia Vise, Craftsman Rolling Toolbox (LOCATED IN WIRE EDM ROOM)
|
LOT: Econoline Mini Sand Blast Cabinet w/Accessories (LOCATED IN EDM ROOM)
|
LOT: Demagnetizer, Electro Arc Model F5
|
LOT: (1) Anvil, (1) 3-1/2" Wilton Torpedo Vise
|
LOT: (18) 36" x 26" Tables w/3-1/2" Columbia Vise, Parts Cabinets, Parts Carousel, In-House Made Surface Plates
|
LOT: (2) 60" x 30" Tables w/3-1/2" Columbia Vise, Shelf
|
12' x 3' Global Shop Top Work Table
|
12' x 3' Global Shop Top Table
|
93" x 35" Roller Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
12' x 3' Global Shop Top Table
|
LOT: (5) Better Pack Tape Dispensers
|
Floor Scale w/Digital Read Out
|
LOT: (2) Digital Scales
|
LOT: (3) Digital Scales
|
LOT: Paper Dispenser w/Pallet of Paper
|
Pallet Pro Wrapping Machine
|
LOT: Contents of Shipping Office and Shelves
|
LOT: (10) Sections of Pallet Racking
|
LOT: (2) Shop Vacs
|
LOT: Safety Cones, Trash Barrels, Metal Oily Rag Safety Cans
|
LOT: (7) Carts, (5) Metal Cabinets, (5) Shelves, Rolling Cart
|
LOT: (16 approx.) Collapsible Metal Crates
|
LOT: Row of Collapsible Metal Crates
|
LOT: (4) Pallets of Metal Tubs
|
LOT: (5) Pallets of Misc. Work Product
|
LOT: (1) Pallet of Cardboard Boxes, (1) Pallet of Promotional Show Setup Items
|
LOT: (17) Heavy Duty Jack Stands
|
LOT: (25) Heavy Duty Jack Stands
|
LOT: (1) 24' Extension Ladder, (1) 12' A-Frame Ladder, (1) 8' A-Frame Ladder, (2) 6' A-Frame Ladders
|
LOT: Large Quantity of Metal Tables
|
LOT: Large Quantity of Metal Tables
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel, 4900 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Stainless Steel, Approx. 1600 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Stainless Steel, 1400 lbs.
|
LOT: Pallet of Work Stock, Cold Rolled Steel, 4850 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Stel, 2300 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Stainless Steel, 3200 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Stainless Steel, 2750 lbs.
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel
|
LOT: 4' x 10' Pallet of Work Stock, Aluminum
|
LOT: 4' x 10' Pallet of Work Stock, Cold Rolled Steel, Aluminum
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel & Copper (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel & Brass (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel, Brass & Copper (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Stainless Steel (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel & Aluminum (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Aluminum (RACK SOLD SEPARATELY)
|
LOT: Contents Only of Section of Cantilever Rack Consisting of Cold Rolled Steel, Stainless Steel, Aluminum (RACK SOLD SEPARATELY)
|
LOT: 10' x 4' Pallet of New Material: Cold Rolled Steel, Stainless Steel, Aluminum
|
LOT: 17' x 4' Barrel Rack w/Pallet of Extruded Aluminum
|
LOT: Jarke Mini Module Stackable Storage Racks w/Bar Stock
|
LOT: 10' x 42" Pallet of Work Stock, Cold Rolled Steel
|
LOT: (8) 10' x 42" Guard Rail Sections, (2) 8' x 42" Guard Rail Sections
|
LOT: Large Quantity of Shop Stools
|
LOT: (4) Large Shop Fans on Stands
|
LOT: (4) Large Ship Fands on Stands
|
LOT: (3) Large Shop Fans on Stands, (3) Small Shop Fans on Stands, (2) Small Floor Fans, 24" Drum Fan
|
LOT: Contents of Shop Office
|
LOT: Group of Freestanding Office Cubicles w/Desks and Wall Cabinets, (4) 9' x 8' Work Stations, (2) 4' x 16' Areas, 10' x 13' Office, 16' x 8' Office, 16' x 10' Workspace
|
LOT: Group of Freestanding Office Cubicles, (6) 9' x 8' Work Stations, 12' x 16' Office, 16' x 8' Workspace, 12' x 12' Workspace
|
LOT: Contents of (3) Offices
|
LOT: Conference Room Furniture: 12' x 4' Conference Table, (10) Upholstered Chairs, 6' x 2' x 30" Credenza
|
LOT: Office Furniture: Office Desk w/Sections, (4) Upholstered Chairs, Reclining Chair, (4) Book Shelf Sections 6' x 20" x 30"
|
LOT: Office Furniture: Desk w/Surround Sections, Upholstered Chairs
|
LOT: (10) Office Chairs, (3) White Boards, AV Cart, TV Cabinet
|
LOT: Contents of Lunch Room: (4) Folding Tables, (2) Round Tables, Metal Shelves, Conference Table w/Microwave, (3) Refrigerators, Upholstered Reclining Chair, Credenza
|
LOT: (4) 13' x 27" x 92" Metal Shelving, (1) 13' x 12" x 92" Metal Shelving, (1) 6' x 27" x 92" Metal Shelving
|
LOT: Metal Storage Racks, Cabinet
|
LOT: Contents of Room: Filing Cabinets, Desk w/Surround Workspace, Desks, Cabinets, Layout Table w/(5) Shelves
|
Hewlett Packard 500 Plotter
|
Remington Safe
|
Copystar 3500i Mono Laser Multifunctional Printer
|
Canon Super G3 Printer
|
LOT: IBM Personal Wheelwriter 2 by Lexmark Typewriter, Ibico Binding Machine
|
LOT: (17) File Cabinets
|
LOT: Misc. Furniture
|
LOT: Reception Area Furniture, Lobby Chairs
|
LOT: Pallet of Office Machines: Printers, Copiers, Paper, Shredder
|
LOT: Pallet of Office Machines: Printers, Copiers, Paper, Shredder
|
LOT: (4) File Cabinets, (2) Fireproof File Cabinets
|
LOT: (45) Vintage Good Form Brushed Aluminum Naval Fireproof Chairs
|
LOT: (4) Metal Outdoor Waste Can Covers, (1) Picnic Table
|
LOT: (14) Office Chairs
|